Jinmuyu Electronics Co., Ltd

03/06/2026

The JMY6281 (Version C) is an NFC module designed around an ST NFC chip. It supports all three NFC modes. This video demonstrates the process of reading the module's emulated card ID: after the module is powered on and configured for Card Mode, an iPhone and an Android phone—each utilizing their respective NFC reading applications—are used to separately perform the read operation.

16/04/2026

A client asked us to demonstrate how to use cryptographic keys to protect data written to ICODE SLIX tags. This video provides a practical demonstration using our MR7805 USB HID R/W RFID reader/writer and our free demo tool, JMYModuleTransWin_ICODE_SLI_X2.

01/04/2026

NFC reader module with dimension 52mm*28mm*4.8mm.

09/03/2026

NFC READER MODULE JMY6223 WITH TEST BOARD MT-500

09/03/2026

NFC READER MODULE JMY5051 WITH TEST BOARD MT-500

09/01/2026

The JMY6122 C version uses an NXP design and supports three NFC modes. When it is set to be Card mode,the UID can be read by Mobile phone with NFC app.

22/12/2025

The JMY6124 features a separate design for the RF antenna and module, allowing for flexible placement of the two external antennas. 50ohm coaxial cable are linked the antenna and module.
Supported standard: ISO14443A,ISO14443B,ISO15693, ISO18000, ISO18092,ISO7816

18/12/2025

MRX7806 is with design. This video show that when it is set to be Card mode. The UID can be read by Mobile phone with NFC app.

27/11/2025

14/11/2025

Contact reader JMY400 for ISO7816(T=0,1); it is with UART/RS232C/USB HID interface