Creative3DPrintsuk

Creative3DPrintsuk UK 3D printing studio. Practical tools for makers, creative products & bespoke design and 3D prints. Explore our range or get in touch about your project ↓

Creative 3D Prints is a UK 3D printing studio making practical tools for makers and small businesses. We design and print useful thinks — including our Label Helpers and wick holders — alongside custom physical prints made to order. We also offer a separate range of digital files and commercial licences. Everything is made in the UK. Browse the shop to see what we're making.

Another little tool I wish I’d had when I was making candles. 😊This little helper started with a message asking if we co...
02/11/2026

Another little tool I wish I’d had when I was making candles. 😊

This little helper started with a message asking if we could make a wick trimming guide.

At first, we weren’t sure how necessary a wick trimming guide would be…Then we looked at the candles I still have from my candle-making days — some wicks a bit too long, others cut too short 😂. Turns out, a little guide would have come in handy after all!

So here it is: our Wick Trimming Guide. A simple, reusable helper that gives you a height reference to trim against, taking some of the guesswork out of finishing your candles.

It’s now on our website, available in 3.2mm, 4mm, 4.8mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm and 12 mm heights.

Have we missed a height you need? Let us know — we’ll be happy to add it! 😊

Thank you for sharing your ideas with us — they’re often where our next little helper begins.
Alex & Paul

Link in our bio - Maker Tools

30/10/2026

For those “is that label straight?” moments 👀🙂

A little look at our Label Helper and Vertical Label Helper in use.

You still apply the labels by hand, but having a guide helps you line them up without judging every placement by eye. A bit of help with one of those fiddly jobs 😊

We design, print and test these ourselves, and we’re always happy to hear how you’re getting on with them. Your feedback and suggestions help us make them better.

We hope these little helpers make labelling a bit easier for you 😊 Thank you for every order, kind message and idea you share with us — it means a lot to both of us.
Alex & Paul

28/10/2026

Another helper is in the making! 👀

Due to requests for a bigger version of our Vertical Label Helper, we’ve been working on one! 🙂

It’s designed for larger containers up to 120mm in diameter — with an adaptor for little 30mm containers too!

A little peek behind the scenes.

Coming soon to our website!
creative3dprints.co.uk

Alex & Paul

27/10/2026

A little less guesswork when placing wooden wicks.

We were asked to create a helper for wooden wicks… and that’s how our Wooden Wick Helper came to life 😊

We designed it to make positioning your wooden wick and its metal clip in the centre of the container a little less fiddly.

Guide it into place, secure the clip, then lift away both parts.

Wick centred. Helper ready for the next jar 🙌

Thank you for sharing your ideas with us — they’re often where our next little helper begins.

Alex & Paul

Find your fit at creative3dprints.co.uk.
Unsure which setup you need? Send us a message — we’re happy to help 😊

25/10/2026

Getting your wick centred can be fiddly…

We designed a little helper for that 🕯️

Guide the wick into the centre. Keep it steady while you pour.

Wick placement made a little easier.

Find your fit - link in the comments

22/10/2026

Ever spent far too long trying to get a label on straight? 😅

Last time, we showed you how our Label Helper range has grown.

Now, here’s a little demonstration of how they actually work!

Four different helpers, each designed for different containers and labelling needs, but all with the same goal: making the labelling process a little easier, less fiddly and more consistent.

We hope these little helpers make your life a little easier!
Alex & Paul

Link in bio - Maker Tools

19/10/2026

A recent order included all 4 of our Label Helpers, and we just wanted to say thank you 😊

It’s really lovely to see the whole range together like this.

Our Label Helper range has grown step by step over time.

It started with our original Label Helper for round jars, bottles and tins.
Then came the Label Helper Junior for smaller bottles and mini jars.
After that, we created our Vertical Label Helper for round containers, followed by our Vertical Label Helper for square jars, bottles and boxes.

Each one was created to make labelling a little easier, more consistent and less fiddly — just for different types of containers.

Thank you so much for supporting our small business 🙏
Alex & Paul

Address

Wednesfield
Wolverhampton

Opening Hours

Monday 9am - 4:30pm
Tuesday 9am - 4:30pm
Wednesday 9am - 4:30pm
Thursday 9am - 4:30pm
Friday 9:30am - 4pm

Website

,

Alerts

Be the first to know and let us send you an email when Creative3DPrintsuk posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category

Nearby computer & electronics services

Other Printing Services in Wolverhampton

Show All