Shubhamin

Shubhamin we are one of the world’s leading suppliers of Total Packaging Solutions for the Printing Packaging

20/10/2026

Fixing the same press problem every week?

Ravana had the same problem.

Every time Lord Rama cut off one of his ten heads,it grew back. Then Vibhishana revealed the secret: the nectar that kept Ravana alive was in his navel.

Rama aimed at the root,and Ravana fell.

On the press floor,we keep cutting heads too.

More blade pressure for streaks. More ink for weak colour. More cleaning for leaks. And the problem comes back next week.

The 10 heads of the press-floor Ravana:

01 Dot gain
02 Weak colour
03 Streaks & haze
04 Ink leaks
05 Register drift
06 High power bill
07 Thickness variation
08 Waiting for spares
09 Unplanned stops
10 The "chalta hai" attitude

This Dussehra,fix the root,not the symptom.

Which head troubles your press the most? Comment the number 👇

Happy Dussehra from team SHUBHAMIN.

19/10/2026

Day 9 of Navratri: Maa Siddhidatri.

She holds all eight siddhis,the powers of completion.Lord Shiva worshipped her and received them all,and half his body became hers: Ardhanarishvara.

Two halves,one whole.
Your press and your supplier work the same way: two halves of one uptime.

9 days, 9 lessons for your press:

1. Foundation: the right mounting tape
2. Discipline: a clean anilox
3. Alertness: inspect at full speed
4. Energy: descale on schedule
5. Protection: healthy end seals
6. Courage: the right doctor blade
7. Speed: critical spares in stock
8. Precision: measure in microns
9. Partnership: a supplier who picks up

Save this post and share it with your press team.

Thank you to every printer and converter we serve across India,the Middle East,Africa and Mexico.

Tag the person who keeps your press running.

Shubh Navratri and Happy Dussehra from team SHUBHAMIN.

18/10/2026

Day 8 of Navratri: Maa Mahagauri.

Years of tapasya left Parvati covered in dust, her skin darkened. Lord Shiva bathed her in the waters of the Ganga,and she rose radiant and pure: Mahagauri.

In packaging, precision is measured in microns. A human hair is about 70 µm.

Measure these,don't assume them:
1. Film thickness across the width
2. Plate thickness
3. Mounting tape thickness

Pro tip: check at 3 or more points across the width,not just one.

We supply dial and digital thickness gauges. Link in the first comment.

Which thickness check does your team never skip? Tell us in the comments.

Tomorrow, Day 9: the goddess even Shiva worshipped, and a lesson in partnership.

Shubh Navratri from team SHUBHAMIN.

17/10/2026

Day 7 of Navratri: Maa Kalaratri.

Demon Raktabeej had a boon: every drop of his blood that touched the ground became a new demon.

Maa Kalaratri,the fiercest form of Durga,stopped every drop before it fell.

She is also called Shubhankari,the one who brings good.

On the shop floor,one breakdown multiplies: missed dispatch,rework, idle crew.

Keep these ready before the dark hour:
1. A list of the 10 parts that can stop your press
2. Those spares in stock, not on order
3. A supplier who picks up the phone

Pro tip: write down your 10 critical spares today. Stock them before you need them.

We supply spares and on-call breakdown support for CI Flexo and Rotogravure presses. Link in the first comment.

What's the longest your press has stood still for one part? Tell us in the comments.

Tomorrow, Day 8: the goddess of purity meets precision in microns.

Shubh Navratri from team

SHUBHAMIN.

16/10/2026

Day 6 of Navratri: Maa Katyayani.

Sage Katyayana prayed for the Goddess to be born as his daughter.

She came as Katyayani,the warrior, and defeated Mahishasura,the demon no god could stop.

On a flexo press,the doctor blade fights waste in every rotation.

3 signs your doctor blade is worn:
1. Streaks along the web
2. Haze in non-print areas
3. Uneven colour density

Pro tip: more blade pressure is not a cleaner wipe.It is faster wear.

We supply doctor blades.Link in the first comment.

Steel or plastic blade — which works better on your press?

Tell us in the comments.

15/10/2026

Day 5 of Navratri: Maa Skandamata.

Demon Tarakasura could be defeated only by a son of Shiva. Parvati became the mother of Skanda, Lord Kartikeya, who defeated him.

She is shown with him on her lap: power that protects.

On a CI Flexo press, the end seal protects the ink chamber.

3 signs your end seals are worn:
1. Ink dripping at the chamber ends
2. Ink build-up on roll ends and deck
3. Frequent stops to clean up

Pro tip: change end seals every time you change doctor blades.

We supply end seals for CI Flexo chambers.

Link in the first comment.

How often do you change end seals on your press? Tell us in the comments.

14/10/2026

Day 4 of Navratri: Maa Kushmanda.

Before creation there was only darkness.with a gentle smile she created the cosmic egg, the universe.her name says it: Ku (little),Ushma (warmth),Anda (egg).

She is said to live in the core of the sun and give it its energy. in your plant,energy hides in chillers and heat exchangers.

3 signs of scale build-up:Chiller struggles to reach set temperature Power consumption keeps rising Water flow drops Pro tip: descale on a schedule,not after the breakdown.

we supply Rydlyme,a biodegradable descaler.

link in the first comment. when did your plant last descale its chillers?tell us in the comments.

hashtag hashtag hashtag hashtag hashtag

13/10/2026

Day 3 of Navratri: Maa Chandraghanta.

After marrying Lord Shiva,Parvati wore a half-moon on her forehead, shaped like a bell.chandra means moon,Ghanta means bell.its sound is said to drive evil away.calm,but always alert.

On a running press,alertness means seeing the print at full speed.

What a stroboscope lets you check, live:
1. Register between colours
2. Dot quality and smudging
3. Defects, before the roll is wasted

Pro tip: sync the strobe to your repeat length so the image stands still.

We supply stroboscopes for web inspection.link in the first comment.

How does your team check print quality at full speed today? Tell us in the comments.

Shubh Navratri from team SHUBHAMIN.

12/10/2026

Day 2 of Navratri: Maa Brahmacharini.

Parvati vowed to win Lord Shiva as her husband.she lived on fruits,then only on leaves,and then gave up even the leaves.that is why she is also called Aparna.

Her power came from discipline,repeated every single day.

On a flexo press,discipline means a clean anilox roll.

3 signs your anilox needs a deep clean:
Colour looks weak at the same viscosity
Shade drifts from the last run
You keep adjusting ink to match colour

Pro tip: clean right after the run,before ink dries inside the cells.
We supply anilox cleaning gel. link in the first comment.

How often does your team deep-clean the anilox? Tell us in the comments.

Shubh Navratri from team SHUBHAMIN.

hashtag hashtag hashtag hashtag hashtag

11/10/2026

Day 1 of Navratri: Maa Shailputri.

In her past life she was Sati,Lord Shiva's wife.she was reborn as the daughter of the Himalaya: Shail means mountain,Putri means daughter.she is worshipped first of all nine forms,because she is the foundation.

On a flexo press,the foundation is the plate mounting tape.

3 signs your tape is wrong:
Dot gain in the highlights
Weak,patchy solids
Bounce or banding at speed
Pro tip: soft tape for fine screens, hard tape for solids.Match the tape to the job.

We supply plate mounting tapes. link in the first comment.

Soft,medium or hard — which tape runs on your press?Tell us in the comments.

Shubh Navratri from team SHUBHAMIN.

hashtag hashtag hashtag hashtag hashtag

Address

Noida
Noida
201301

Alerts

Be the first to know and let us send you an email when Shubhamin posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Shubhamin:

Shortcuts

Share