ROBU, Magazine Chowk, Dighi, Pune (2026)

17/04/2022

ATMEGA 32 DEVELOPMENT BOARD

The SmartElex ATmega32 Development Board can be used to evaluate and demonstrate the capabilities of AVR ATmega32 microcontroller. The MCU socket onboard provides support for 40 pin DIP package of AVR ATmega32 controller. This board designed for General Purpose application.

The ATMEGA Project Board is designed to work with ATMEGA 32. The ATMEGA 32 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. It executes powerful instructions in a single clock cycle and achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption

Board has onboard power supply circuit, Micro USB for USBASP programmer, Micro USB port for serial communication with the computer and another serial device, power status LED (RED), Reset switch, Two User switch, Two User LED, and port extensions for all 4 ports. You can power the Board through the DC plug-in jack. The onboard power regulator can handle anything from 9 to 12VDC.

https://bit.ly/3vnsUim

16/04/2022

Lipo Battery 1300 Mah

ORANGE Graphene 1300mAh 4S 100C Lithium Polymer Battery?pack (LIPO)?Robu.in?battery are known for performance, reliability, and price. It?s no surprise to us that Orange?Lithium polymer packs are the go-to pack for those in the know. The Orange?batteries deliver the full rated capacity at a price everyone can afford.

ORANGE Graphene 1300mAh 4S 100C Lithium Polymer Battery?pack (LIPO) battery are equipped with heavy-duty discharge leads to minimize resistance and sustain high current loads. Orange batteries stand up to the punishing extremes of aerobatic flight and RC vehicles. Each pack is equipped with gold plated connectors and JST-XH style balance connectors. All Orange Lithium Polymer batteries packs are assembled using IR mature cells.

https://bit.ly/3rw1a9Y

,

08/04/2022

NEEMA 34-JK86HS68-5904-3.4N-m Keyway Type

The stepper motors move in precisely repeatable steps, hence they are the motors of choice for the machines requiring precise position control. The Nema17 3.4N-m Stepper motor can provide 3.4N-m of torque at 1.68A current per phase.

The motor’s position can be commanded to move or hold in one position with the help of Stepper Motor Drivers. The Nema17 3.4N-m Stepper motor provides excellent response to starting, stopping, and reversing pulses from the stepper motor driver.

https://bit.ly/3NWibUl

07/04/2022

3D printers are becoming more popular day by day, and Creality is one of the major players in 3D printer production, which has introduced a lot of range of different kinds of printers at a very affordable cost.

Creality offers advanced-level 3D printers at a lower cost than any other peer brand in the market, making them ideal for the one who wants to start with 3D printing or to buy their own printer for home.

The Creality CR-6 SE 3d printer is the first printer that Creality has financed through crowdfunding. As the latest version product, CR-6 SE really achieves silent printing owing to its silent Trinamic controller with STM32F103RET6 chipset and silent cooling fans.

website: https://bit.ly/3DLItUE

Address

Magazine Chowk, Dighi
Pune
411015

Website

http://www.robu.in/

Alerts

Be the first to know and let us send you an email when ROBU posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

ROBU