Stark80

Stark80 Original and longest running safety purveyor. Over a decade long of hobbyist part kits.

what does that have to do with anything? Im saying he is a tool and his tele group sucks and is monitored because he is ...
05/23/2026

what does that have to do with anything? Im saying he is a tool and his tele group sucks and is monitored because he is scared of something borderline illegal being on there. Its telegram. Its kinda the point.

- The telegram group is monitored by the Stark80 team in an effort to keep every thing legal. The point of telegram is not to run an illegal circus, in fact since it is now backdoored by the feds, it is one of the worst places to do so. We have a telegram channel essentially as a backup to our Facebook. We monitor it as other darknet forums which have offered questionable parts eventually get taken down and with it those responsible for facilitating a platform in which to carry out those actions get pulled along with it.

Besides. When Noone was selling ss besides Hanes and a select few he was scared just selling rounded detents.

- We were never afraid to sell parts. There are different methods to sell and a business has the right to refuse service. Parts were always produced and offered by us. The only time we stopped selling was to correct an issue in which we were scammed by a team member and subsequently the community at large was affected.

Then when it was time for the c and d to be served he was one on the list.

- We were not the first ones on the list and the only reason Rare Breed was able to C&D us was because we spoon fed them the information to do so. We had a drop address listed on the web site for about a week’s time during which they acted exactly how we expected them to.

He was hiding in the shadows when everyone was scared but now that he is being sued he all of a sudden belongs in the slush fund group that had balls.

- We are not being sued as Rare Breed themselves have stated they have exhausted efforts to find us. They can not without being spoon fed the information. We are part of the “slush” fund to aid in the law suit. We have not taken any disbursements.

- We have purchased parts off the vendors that are involved at 3-4x the cost we can produce at in an effort to support them.

- We are the only company we know of paying the lawyer fees despite not being sued.

- We are the only company we know that has actively passed on deals, bringing them instead to the others vendors for production in an effort to help them stay afloat.

All that summed up.
Sucks the hanes group is gone because the only one left may as well be run by the feds.

- We are not Feds but then no one needs know are actions. Those who know, know. There is a difference between being scared and having a decent amount of OpSec.

In hand and sailing…
05/23/2026

In hand and sailing…

By popular demand now a stand alone item.Tested and working with Stark80 remix sets.
05/15/2026

By popular demand now a stand alone item.
Tested and working with Stark80 remix sets.

05/11/2026

Do Stark80 Drop In Cassette Triggers work with the Super Safety?

MAP…plus some extra added no bean goodies. Blood line gun l**e and anti walk pins. Extra added value.
05/09/2026

MAP…
plus some extra added no bean goodies. Blood line gun l**e and anti walk pins. Extra added value.

https://www.instagram.com/redstarpalmettoSuper Safety AUG by Red Star Palmetto; Machine Services by Stark80
05/09/2026

https://www.instagram.com/redstarpalmetto

Super Safety AUG by Red Star Palmetto; Machine Services by Stark80

594 Followers, 46 Following, 23 Posts - See Instagram photos and videos from Red Star Palmetto ()

At the port of harbor
05/06/2026

At the port of harbor

05/03/2026

3 position built on top of Stark80 standard AK SS kit. Additional special parts needed for 3 pos sourced separately.

Revised cams are now under production.

04/30/2026

Black Partisans touch down tomorrow

ambi 0-90-180 Arc Fires at port of harbor

Vector FRTs to be listed

Waiting on AK SS cam sample testing before producing the lot

04/26/2026

TLDR:
- All parts finished except cams.
- AK cam R&D delay sailing enabling a more perfected product. (Reduced wear through use)
- 9mm compatible parts, except trip bar will be separate later.
- producing revised cam samples for testing.
- 1 to 2 additional weeks lead time, faster depending on usps.
- postpone bean count increase as a thank you for waiting.

We’re right in the middle of our proposed expected sailing date for AK SS and an update is due although we’ve been posting information directly to the offering page at the port of harbor as we hit certain production points. All parts are done in production with the exception of the AK cam. With the help of Stryke Gunworks we’ve been doing some R&D to have a more refined and perfected AK cam. What this means is that they will be more universal for pistol calibers and more standardized AKs. The difference which will facilitate the use in pistol caliber AKs will be the trip bar, which we will have separately later on. In addition to that we had material missing in certain key areas which through extended use resulted in gouging and extreme wear, the improvements made give way to wear reduction.

The next step moving forward is to produce several revised cam samples in metal for testing. Given rapid prototyping in 3d printing is successful in metal production and testing we will have these out shortly. Aiming for an additional 1-2 weeks. With this we realize we did not keep to the original time line and as such pushed back one of the planned bean count increases.

Address

Adelanto, CA

Alerts

Be the first to know and let us send you an email when Stark80 posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Stark80:

Share