Spare-Time Hobbies

02/26/2026

Finally getting some time to design something new!

AXP8 Axial Gilamon Fuel Cell (Receiver Box)
The AXP8 Gilamon receiver box is designed to relocate the receiver to a more accessible location. The lid of the receiver box has snap-fit access to make tool-less access quick and easy. To install the receiver box, simple install the three supplied zipties and secure them tight around the frame. The Fram triangle are design to snap into the openings to change the look and supply a "fuel fill" line from the cage to the top of the receiver box. You can connect them with a piece of silicon Nitro fuel line (not included) to complete the look.

https://www.facebook.com/share/p/1GjoDLvMYG/

Product Features Everest Gen7 PRO 1/10 Scale Off-Road Scale TruckPowder Coated 3mm Steel Ladder FrameAdjustable Wheelbase 317-325mmHobbywing Brushed Waterproof ESCLicensed Interco Super Swamper TiresReal Beadlock Wheels2.4GHz Radio SystemBattery & Charger IncludedMore Details BelowSpecifications Mot...

08/06/2025

We also whipped up some window nets to protect your driver! Check them out! As always, you can get them from us or do-it-yourself!

DIY - https://sth.ecwid.com/products/STL-DIY-3DP-AXP8-Axial-Gilamon-Window-Net-p772646324

Buy - https://rcaddict.com/products/axp8-axial-gilamon-window-net?_pos=2&_sid=5958c83b4&_ss=r

Product Features Everest Gen7 PRO 1/10 Scale Off-Road Scale TruckPowder Coated 3mm Steel Ladder FrameAdjustable Wheelbase 317-325mmHobbywing Brushed Waterproof ESCLicensed Interco Super Swamper TiresReal Beadlock Wheels2.4GHz Radio SystemBattery & Charger IncludedMore Details BelowSpecifications Mot...

08/06/2025

Here's a new product for the Axial Gilamon. Now you can customize your look with a set of body panels that have a bit of style to them! As always, you can get them from use or do-it-yourself!

DIY - https://sth.ecwid.com/products/STL-DIY-3DP-AXP8-Axial-Gilamon-Body-Panels-p772646299

Buy - https://rcaddict.com/products/axp8-axial-gilamon-body-panels?_pos=1&_psq=gilamon+body&_ss=e&_v=1.0

Product Features Everest Gen7 PRO 1/10 Scale Off-Road Scale TruckPowder Coated 3mm Steel Ladder FrameAdjustable Wheelbase 317-325mmHobbywing Brushed Waterproof ESCLicensed Interco Super Swamper TiresReal Beadlock Wheels2.4GHz Radio SystemBattery & Charger IncludedMore Details BelowSpecifications Mot...

05/29/2025

Finally the V1B - "Pajaro" Variant is ready for the UTB18 Swap. If you already have the chassis, all you need is the printed parts kit or the DIY print files.

I have not test fit the Bushido 12 yet. That should be done next week. I need to validate the Skid doesn't need adjusted to accommodate the slightly different Wheel Base from the Bu**er.

Files come free with chassis purchase and printed parts purchase. Alternatively, you can purchase the files and DIY the parts if you like.

Parts Kit - https://rcaddict.com/products/v1b-pajero-plastic-parts-kit-utb18-or-bushido12?variant=52069167628598

Chassis - https://rcaddict.com/products/v1b-bugger-chassis-kit-utb18?_pos=1&_sid=2dcd509a2&_ss=r

This is for plastic parts set only. Don't forget to order your chassis Rails Note: The Bu**er Chassis Works for both the Pajero Build and the Bu**er Build. This kit is designed to work with the Tamiya Hard body Pajero Metaltop TAM9335500 * The best place to source this body is currently on e-bay. **...

04/26/2025

Our SCX6 RC Speedy Moon Buggy Build needed a way to mount these smaller large scale servos. Here you have it! It’s a simple bracket to get that stock or stock size servo mounted up while you save you money for a proper size servo!

This is a simple kit that allows you to mount your stock or stock sized servo on the front or rear CMS of your RC Speedy Moon buggy for your SCX6. What you get: 1 - Spacer Bracket What You Need:4 - m4x16 BHS, 2 - m4x20 BHS, 6 - M4 Nylock

04/19/2025

Here's the newest Spare-Time Hobbies design. We have put together a Toe and Camber Setup Station for 8th Scale Race buggies!

Get it here: https://rcaddict.com/products/1-8th-scale-toe-and-camber-setup-station?_pos=3&_sid=3a5da0d8a&_ss=r

Print your Own: https://sth.ecwid.com/products/STL-DIY-3DP-1-8th-Scale-Toe-and-Camber-Setup-Station-v1-p743864531

These were designed around a 1/8th Scale E-Buggy. The disks are set up for the 17mm Hex and Nut that is typically found on an 1/8th Scale E-Buggy. What you get:(2) - Front Disks(2) - Rear Disks(1 ea) - 0, 1, 2, 3 Degree Measuring Wedge. First set Zero Camber then Zero Toe (Measure the distance from....

04/06/2025

Checkout the latest from Spare-Time Hobbies! We designed a light bucket that you can glue in 5mm LED's. If you are still rocking to the stock grill and want to add a winch, there is also an Fairlead Bucket that lest you mount the winch directly behind the drivers side light and run the winch line out of the hole! As Always, you can DIY print your parts.

1 Led Version - https://rcaddict.com/products/vanquish-h10-optic-rocker-protector-copy

2 Led Version - https://rcaddict.com/products/vanquish-h10-optic-head-light-fairlead-2-led

Print one at home - https://sth.ecwid.com/products/STL-DIY-3DP-H10-Optic-Headlight-&-Fairlead-Bucket-p740252424

03/18/2025

A little more progress on the V1B Pajero. The body is secure, details are being added, inner fenders v1 test is printing! Stay tuned! Interior is next on the list to mock up! I think these shocks need limited far too much flex on this rig! 😂

03/16/2025

Making progress on long over due updates to the V1B Platform. Today I got started on the V1B Pajero Swap. Same chassis, Skid, and Servo mount. New sliders so far, working on the front and rear sub bumpers to make the body mounting seamless, easy and sturdy. Though stock utb18, enduro 12 and any 3.75 tire will require some fender trimming. This is a true tiny tire body. I think I have a tiny set that will work. We’ll find out once this sholder pain dies off. I think I over did it today. Time to rest.

03/16/2025

Here I am healing from this shoulder surgery ripping my scx6 around the drivway and the wheel comes fiying off right at me… lol good thing my little guy is a decent rc mechanic to help me get it back on. Lol