Was ist die Webseite?

airbornfpv

My name is Artem Bulashev. I have been flying hells, planes, quads for past 12 years. It is my hobby Buy, Test, Build and crash. Then repeat. 👍😂

Then repeat, until I find The best.

30/09/2024

Nine with 100v 100a Dual Lite!! ❤️❤️ perfect combo! (52v 30ah battery inside! Dual vesc also inside!)
= perfect for EU Sleeper beast!

- rear motor uses 40% thinker phase wires, and Grin ferrofluid! 4.5-5ml needed only

23/06/2024

Damm this is a powerhouse in a tiny solid aluminum brick 😄❤️👍

Amazing product!!

27/06/2021

Full based Glide Hammer (reversed and swapped central plate and bottom plate) now ready to fly on new sexy motors! Last one failed!
we’re smooth and had a punch! But one of them got bent shaft!! Shaft! I don’t remember when I bent one last time 😂 over the dirt and grass crashes 🤣 no no in my book! No we test motors 🤗🤗 lower KV but we shell see

04/04/2021

No filters, it looks vibrant as hell 😳😍😍😍

04/04/2021

Fresh out of dip - my first dip 😁😁🥰
- came out rather cool 😜 not perfect with tons of « intended » imperfections. But it was an awesome Journey! Thank you Orqa for the cover! Thank you for goods and support you gave! Amazing custom foil print!

Join us on Orqa Lounge on face book 👍👍 subscribe not to miss next step - 2 part transparent lack and end result 😁😁

03/04/2021

In process of hydro dipping Orqa case for an awesome custom look 😵🥰✅✅ subscribe 😜

Orqa
DL Hydrographics - Wassertransferdruck im Saarland und der Welt

21/02/2021

If you didn’t fly today, Go f**kn Fly 😁😁 weather is s**t, but stick time never harts 🔥🔥

Quad 2
- blackcat Sica5.6 frame
- Xing 2207 2500kv
- 2020 stack
- Nano
- 51433
- hero session5

Quad 2
-
- stack with 45amp esc
- Smoox 2306.5 2580kv
- 51433 props
- .tech starlight camera
- session 5
—- dshot 2400

21/02/2021

Best bag ever 🥰 thanks 🙏
- (hidden gem people!!! Get it! Build it with esc between arms and lower deck)
- glide tank (central plate and bottom plate switch around! Esc between arms! I also cut away the front section and saved 10g, camera is at the tail - new front 😜)

Both rock on 51433 props but one on EmuFlight + Zeez and one is on full

smoox 2306 plus 2580kv are Awesome 😍 But they deserve another post as I have few stories to share with them lol 😆

21/02/2021

- 2020 stack is the best FC for EmuFlight you can get in my opinion 😳 And did an insane job filtering - it flies almost JUST LIKE ! It is smooth as butter, prop wash is just a touch more than on full Fettec! I can not advice enough, all betaflight pilots MUST try one 5inch on EmuFlight!!! It is so much better!
•
Lastly, after long tests 51433 is 100% best over all prop out there - best in what matters (great thrust, no less than other even higher pitch props! Great efficiency, if not the best! And yet one of the highest RPM at any given throttle position - easier to control for the motor = less prop wash, more locked in!)

———-
you guys need to finally add BlackBox support 👌😊

2020 esc is way to long (Fettec 30x30 45amp esc ends up being more compact than your 20x20 due to sticking out battery lead pads ...)

thank you, I will publish motor prop test data very soon 👍👍👍

14/02/2021

TPU is fun and easy, and fast! That was actually 75mm/s! thank you for awesome Genius printer

/// tomorrow will test fly tunned EmuFlight vs Kiss full Fettec, stay tunned 😉👀

13/02/2021

Finally!! Tpu prints are fast! 75mm/s in amazing quality!!! 🤪🤪🤪 if any one needs in Austria or Eu will be happy to help ✅

12/02/2021

Have done some testing and analysis of 3inch motor / prop. vs Gemfanhobby prop
of vs motors.

I was not planning to post it right now, but up on special request - there it is.

My conclusions:
- HQ prop is extremely inefficient & produce even less thrust than GF props on both motors. (bad prop design)
- GF3016 prop is SIGNIFICANTLY more efficient, and the fact that it produces more thrust (due to higher RPM archived) is amazing. On both motors

- Fettec motors provide 25% more thrust at 30% throttle (10g) and 25% more thrust at 50% throttle (20g)! This is every substantial increase considering that would equal to 80g from 4 motors on a 100g quad :D
- FPVcycle Motors though do provide 15-20% better efficiency (it is very efficient indeed, specially with GF3016)

= at the end of the day, don't use HQ3x2.5x3 on those motors, load is too high for that size motor or design is flowed.
= And as for motors - FPVcycle have higher max thrust even tough they will get to it later in the stick movement - which will directly translate into throttle resolution!

Please note 2 Fettec motors burned down at 1850 pwm (started to smell at 1750pwm already), while FPVcycle seem to have better over load ability (see amps!) and managed to pass all 2000pwm with some slight smell at max.

5 inch testing is coming along :) Stay tuned for you tube over view

Artem - AirbornFPV

Adresse

Vienna

Webseite

https://www.youtube.com/channel/UCpZtEI2pbj5FN4X0C_h1bxA

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von airbornfpv erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.