Dremc Store

Dremc Store Shop the largest 3D Printer Spare Parts and Supplies based in Brisbane Australia. Same Day Shipping.

01/11/2026

As we head into the Christmas period, we want to remind customers that ongoing on certain global component shortages are still affecting lead times across some of our product ranges. We are expected most of out of stock of core spares to be restocked by Mid Nov, have core spare you need, reach out to us to put allocation/hold for you.

With demand high and supply of certain components limited, some 3D printer spare parts including hotends, extruders, filaments and motion control components are taking longer than usual to arrive.

If you have upcoming maintenance or servicing requirements, or equipment upgrades planned for the end of the year or early 2027, we encourage you to get your orders in as soon as possible, or contact us to book end of servicing before our cut off, as we no longer take repair request in December/January that hasn't been pre-booked in or on contract.

Planning ahead will help minimise potential delays and ensure you have the spare parts you need, when you need them.

We can help you check product availability, confirm current lead times and explore alternative solutions where necessary.

All new Stealth Press S1 exploded view and interactive build guide! Link to interactive on product description.
30/10/2026

All new Stealth Press S1 exploded view and interactive build guide!

Link to interactive on product description.

Still have monolith build pending, maybe time to grab CNC clamp for your build. V2 DW Tas is expected in December though...
29/10/2026

Still have monolith build pending, maybe time to grab CNC clamp for your build. V2 DW Tas is expected in December though, if you're looking to for compatible A4T/XOL CNC carriage with Monolith.

"LDO Monolith CNC Belt Clamp by LDO Motors"

Second time the charm, its actually back in stock now ...😅 best suited for nevermore max / V2, as you need 1 per re-fill...
23/10/2026

Second time the charm, its actually back in stock now ...😅 best suited for nevermore max / V2, as you need 1 per re-fill with some left over as this is 2.15L. Available in both pre mixed for balance or high temp Notus "previously Scorch"

Rapido X is here, cheaper than 2F and higher flow, larger heater 120w! So if you need replace your older rapido UHF cons...
20/10/2026

Rapido X is here, cheaper than 2F and higher flow, larger heater 120w! So if you need replace your older rapido UHF consider Rapido X, will not be suitable of regular HF setup though, unless you print new hotend mount to support longer length.

Check out link in comment or search Rapido X on our website @ dremc.

DREMC Breakaway Support for PLA/PETG offers more reliability when used as a support interface compared to using PLA or P...
18/10/2026

DREMC Breakaway Support for PLA/PETG offers more reliability when used as a support interface compared to using PLA or PETG as each other's support interface, as it offers slightly better layer adhesion, so your purge tower doesn't fail. It's also less moisture-sensitive compared to PVA and more cost-effective.

Checkout our store dremc store and search "support for pla" or check link in comment.

Our ABS GF and ASA CF restocked! Grab them while its last.
17/10/2026

Our ABS GF and ASA CF restocked! Grab them while its last.

Want to CNC metals parts in your garage for your next project with open sourced mill, build your own with high quality L...
16/10/2026

Want to CNC metals parts in your garage for your next project with open sourced mill, build your own with high quality LDO Motors Kits, bonus up to $250 filament credit when pre-order Milo V2.0 with UEB, Casa, more info on our website.

We now have the Snapmaker × Phaetus Liber High Flow Hotend in stock for the U1.Developed specifically for the Snapmaker ...
12/10/2026

We now have the Snapmaker × Phaetus Liber High Flow Hotend in stock for the U1.

Developed specifically for the Snapmaker U1, this drop-in hotend delivers up to 55 mm³/s of volumetric flow an increase of up to 87% over the standard U1 hotend. It pairs a split-flow melt channel with a 0.4mm DLC-coated hardened steel nozzle and a seamless titanium alloy heat break for reliable extrusion at higher flow rates.

Best suited to large parts, thick walls, and long continuous extrusion paths. Note that CF/GF-reinforced filaments, Wood PLA, and TPU are not recommended.

https://store.dremc.com.au/products/snapmaker-phaetus-liber-high-flow-hotend-for-u1

Address

Brisbane, QLD
4000

Alerts

Be the first to know and let us send you an email when Dremc Store posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby computer & electronics services