HF Radio & Antenna Systems Australia

20/05/2026

Hey Guys
Checkout the Pic below of the Bushcomm BBA-100C & 10 Metre Tow series mast.
As you can see, the antenna is configured as an inverted Vee.

This photo was taken in FSM (Federated States of Micronesia) after Typhoon Sinlaku.

Just goes to show you how well the Bushcomm products can hold up, even after an extreme weather event such as this :)

02/09/2025

Unboxing and run-through of the legendary Bushcomm SWC-100 HF Antenna

19/08/2025

Hi Guys

Thought you might like to know that we are now also keeping stock of Bushcomm antennas in our Brisbane office, ready for immediate dispatch.

Take a look at the shipment of Multiwire broadband BBA-100/BBA-600/BBA-1KD, Single wire dipole SWC-100C, Swe-100P End fed dipole kit, Mil-2H, Mil51 portable mast & Pigtail coaxial strain relief systems received late last week.

Feel free to contact us if you have any further questions.

Cheers

David Collins

07/07/2025

Hi All
Exciting times, we are about to update our page. We will continue to partner with Bushcomm Antennas with local & international sales, but we will also be offering sales, support & hard to source spares for Aussie equipment Manufacturers such as Barrett & Codan.
Take a look at www.aerialsystems.com.au & www.hfradio.com.au for further information

Thx David Collins

www.hfradio.com.au Australia's Premier Barrett & Codan HF SSB Radio & Antenna Resource. Complete Systems/Sales/Service/Spares & Parts

10/10/2024

Hi Guys

Just to let you know that a Bushcomm Representative will be at the GCARS - The Gold Coast Amateur Radio Society Inc. Ham Fest in Nerang Queensland on the 13th of October 2024.

Kicks off at 8:30am - Why not come down and say Hi!!

08/04/2024

Hi All...

I trust everyone is Well :)

Just to let everyone know that Forcene Engineering will be your Point Of Contact for sourcing the Highlander 8 Amateur Band Multitap antenna within Oz throughout 2024... Contact David Webb on the email below for further information

US Customers continue to source the Highlander 8 Thru DX Engineering

Cheers - The Bushcomm Team!

09/10/2023

Hi Everyone - The Bushcomm Horizon 6.7, is quickly becoming one of our most popular compact HF Amateur radio antenna

Checkout this review by Kenneth W Viar Jr - KU4SMC

Kenneth has been keeping us updated on the the contacts he is making with it. He continues to be very impressed in the performance :)

We would generally recommend a 4:1 balun mounted directly to the radiating elements when using a coaxial coupler inside the shack, but a 1:1 should be OK when using a good quality "Shack" tuner

Many thanks again to Kenneth for putting this video together :)

Bushcomm Horizon 6.7 Compact 6-80 meter Non-Resonant Dipoles BU01097 Rotable Dipole Antenna Review & Contacts By KU4SMC Many Thanks For Watching God Bless a...

11/05/2023

Here's a post just to prove that our antennas are installed in pretty much all corners of the world. :)

Take a look at a Bushcomm HDX-400 installed by Comtech Fiji at the Funafuti airport in Tuvalu.

Previously this control tower had one of our competitors broadband wire antennas installed, and struggled with comms to NZ. Now with the HDX-400 installed, they can reliably chat via HF to other control towers in NZ .

With asymmetrical elements above and below, these antennas offer great short to medium distance propagation characteristics.

We can offer these systems as a turnkey package to suit a Barrett or Codan transceiver, or as a bare kit which allows you to fit your your own tuner to the backing plate.

Information page can be found here: https://www.bushcommantennas.com.au/antenna-system/hdx-series-mast-mounted-auto-tuned-hf-dipole-antenna-system.html

26/04/2023

Hey Everyone.... Just thought I would put the spotlight on one of our more popular compact HF antennas, the Horizon 6.7 Normally used for amateur radio applications, it is a self supporting aluminum dipole antenna with an overall horizontal length of 6.7M.

I actually had one of these installed at my house, using a SG237 tuner mounted directly below the antenna as the coupler. Plan was just to have it up for a few weeks for field testing, but ended up leaving it there for 6 mths..
Worked amazingly well!!! Only reason it came down was because somebody noticed it and asked if they could buy it!! (True story :) ).

You can also mate these up with a coaxial style tuner, but generally you will need to fit a 4:1 balun just below the elements to flatten the range of impedances required for the tuner to match.

Frequency range and Power capability are generally limited by the capability of the tuner/balun

Brochure can be found here:
https://bushcomm.com.au/brochurelibrary/Compact%20horizon%206.7%20HF%20antenna%20dipole%20for%20limited-small%20spaces.pdf

Available from DX Engineering in the US, or directly from Bushcomm Antennas Australia

14/04/2023

Hi Everyone.

Ive had a few questions recently relating to the 27Metre broadband BBA-100C antenna radiation pattern. Of particular interest was the difference between inverted Vee or Horizontal installation Configs.

This document (Below) also gives the specs on Frequency Vs Gain

Many people may not know that the Bushcomm founder & HF Antenna "Legend" Graham Robinson was involved in the original design of the Robinson-Barnes T3FD- 3 Wire Travelling Wave Dipole.
Checkout this WIKI Page for further info:
https://en.wikipedia.org/wiki/Shortwave_broadband_antenna

There are literally thousands of the BBA-100C antennas in use worldwide. Many of them are still in operation 20+ years after installation.

Brochure for standard model can be found here:
https://www.bushcomm.com.au/brochurelibrary/DB00460%20Product%20Brief%20-%20BBA100C.pdf

Professional version BBA-100C S/S with all stainless steel components and other improvements can be found here:
https://www.bushcomm.com.au/brochurelibrary/BBA100C%20SS%20Premium%20series%20MF-HF%20%20Wideband%20Aerial%201.5-30%20Mhz.pdf