Cutter Electronics

Cutter Electronics Changing the lights bulbs of the world to LED We also have a well developed engineering team with expertise in Analog components and microcontrollers.

Cutter Electronics is an Australian owned and operated independent distributor of electronic components, semiconductors, integrated circuits, transistors & capacitors. We are a specialist supplier of Solid State Lighting components with considerable expertise in the application of Power LEDs and can provide standard and custom Solid Sate Lighting Solutions. We also offer redesign, reflux and repair of Led Lighting products.

Nice example of our RGBW Sauna Strip in LA, California Bungalow with IR Sauna, using Shelly RGBWPM controller ...
04/05/2026

Nice example of our RGBW Sauna Strip in LA, California Bungalow with IR Sauna, using Shelly RGBWPM controller



















Lighting up the long game. ⚡️Cree LED’s LS16 is a 16-up J Series® 5050 aluminium MCPCB built to push serious lumens into...
18/11/2025

Lighting up the long game. ⚡️

Cree LED’s LS16 is a 16-up J Series® 5050 aluminium MCPCB built to push serious lumens into street, area and directional luminaires – with the kind of real-world binning and case temps that actually match how fittings get used, not how they’re tested in the lab. 

You get 16 × J Series 5050 LEDs in E, H or K performance classes, 2700–5000 K ANSI CCTs, 70 CRI, tight 3-step MacAdam colour and flux binned at Tc = 60 °C – plus dual 2-pin Wago poke-in connectors, TVS protection and a white aluminium MCPCB ready to bolt straight onto your heatsink. 

Perfect backbone for smart street lights, car parks, walkways and high-bay punch where consistency, lifetime and serviceability matter more than marketing fluff. Build once, deploy everywhere. 💡

, , , , , , , , , , , , ,

Turning lumens into lanes. ⚡️Cree LED’s LS12 is a 12-up J Series® 5050 aluminium MCPCB built for real-world street, area...
18/11/2025

Turning lumens into lanes. ⚡️

Cree LED’s LS12 is a 12-up J Series® 5050 aluminium MCPCB built for real-world street, area and directional lighting – not lab demos. You get three performance classes (E, H and K), 2700–5000 K ANSI CCTs, 70 CRI and tight 3-step MacAdam colour consistency, all flux-binned at Tc = 60 °C so what you design on paper actually shows up in the pole. 

Each 174 × 50 mm board runs 12 x 5050s with dual 2-pin poke-in connectors, on a white aluminium MCPCB with integrated TVS protection – just drop onto a heatsink, land your constant-current driver, and you’ve got a serious building block for street lights, car parks, pathways or high-bay punch. REACH/RoHS compliant and UL recognised, it’s a tidy way to standardise your next outdoor family. 

, , , , , , , , , , , , , ,

Meet the new little powerhouse from Cree LED: the LS8 LED Square PCBA – eight J Series® 5050s on a compact 70 × 70 mm bo...
18/11/2025

Meet the new little powerhouse from Cree LED: the LS8 LED Square PCBA – eight J Series® 5050s on a compact 70 × 70 mm board, ready to drop straight into street, area and directional luminaires. ⚡️💡 

Each LS8 board runs 8 × J Series 5050 LEDs in series, with E, H or K performance classes so you can tune efficacy vs flux to suit the job. With 2700–5000 K ANSI CCTs, 70 CRI, 3-step MacAdam colour consistency and flux binned at Tc = 60 °C, you’re getting serious lumen packages with tight, repeatable colour in real operating conditions – not just on a lab bench. 

The square layout, 2-pin poke-in connector, built-in TVS protection and 120° native beam make it a no-nonsense building block for street lights, outdoor area lights and indoor spots where reliability and lifetime actually matter. Just bolt it to a decent heatsink, hook up your constant-current driver and let it eat. 

Ready to retire your random COBs and roll out something properly engineered? The LS8 is a very tidy way to do it. 🔧✨

, , , , , , , , , , , , ,

Cree are releasing Level 2 Board products this month. 1120mm x 20mm Linear, cuttable in 2(560mm) and 4(280mm) lengths, a...
18/11/2025

Cree are releasing Level 2 Board products this month. 1120mm x 20mm Linear, cuttable in 2(560mm) and 4(280mm) lengths, also outdoor 5050 led based modules

Address

Unit 7/12 Henderson Road
Knoxfield, VIC
3180

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61397641977

Website

Alerts

Be the first to know and let us send you an email when Cutter Electronics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category