Thinglab

Thinglab THINGLAB is a department of Freedspace which is dedicated to 3D design technologies such as, 3D Scanning, 3D Modelling, 3D Printing and creative services.

Based in Melbourne Australia, Freedspace (formerly Inition Asia Pacific) is a center of excellence for 3D Technologies. Organised in focused technology units the company is comitted to bringing the best and latest 3D technologies to the ANZ markets. With decades of experience behind us we have the experience, products and knowledge to provide the right solutions.

26/10/2026

To celebrate the launch, the Form Studio 1 Flex is available in standard Graphite, alongside three limited-edition colours: Aqua, Violet, and Teal. Secure your preferred colour on preorder now, before stock runs out.

Resin precision meets filament simplicity

35 µm pixel resolution and speeds up to 130 mm/h. Equipped with Open Material Mode, automated resin dispensing, 5 intelligent monitoring systems, and UL GREENGUARD Gold certified low-emission printing

Engineered for speed
Most prints finish in under two hours. A custom lens array and 28 LEDs deliver a uniform, highly collimated 6 mW/cm² light field that cures resin quickly and evenly. Release Texture V2 and a flexible film tank reduce peel forces for faster printing without compromising surface finish or fine detail

Safe to use resin
Low-odor Alpha Resins are the first to achieve UL GREENGUARD Gold, certifying low VOC emissions for the printing process when printed on Form Studio 1 with VOC Extractor. Liquid resin scores as a non-skin irritant under OECD 439, and post-processed parts meet ISO 10993 requirements for long-term skin contact, making them suitable for wearables

Print amazing parts
30 μm pixels and finely tuned anti-aliasing capture subpixel detail, while lower peel forces and light-touch supports leave smooth, clean surfaces. Every material setting is calibrated for dimensional accuracy, holding ±0.15% XY tolerance so assemblies fit together as designed

Unmatched reliability
Every material comes with validated print settings, tuned on hundreds of test parts. During each print, intelligent control systems monitor resin temperature, resin level, print forces, and leveling, and an integrated camera shows progress remotely in the Form Mobile App

07/10/2026

In our latest discussion and review, Ellie and Sean break down why Formlabs—and the Fuse series—stands out against competitors like HP and EOS.

Here are the key takeaways:
Expanded Build Volume: Delivers a larger build volume than most machines available on the market today.
Cost-Effective Setup: Costs up to half as much as competing machines, with the full ecosystem setup coming in 30% to 40% cheaper in many cases.
Seamless Implementation: Designed for easy commissioning and servicing—you can essentially roll it right through the door and get started!
Check out the full review with Ellie and Sean to see if it's the right fit for your workflow! 👇

17/07/2026

Discover the power of the Artec Spider II

Whether you're tackling a large-scale project or something small, the Artec Spider II captures every detail, color, and texture with precision. 🌟 Our expert staff is here to guide you through the scanning process, ensuring your surfaces are represented perfectly. Ready to elevate your project? Let's chat!

30/06/2026

When we needed new signage for our building, the traditional route felt a bit... ordinary. So, instead of calling a signage company, we handed the keys to our 3D Print Technician, Ray.

Ray took our SVG logo, extruded it into a 3D model, and let our heavy hitters do the rest. By utilizing our large-format BigRep and Modix printers, we turned a digital file into physical, high-quality building signage in record time.

The Results by the Numbers:

⏱️ Turnaround Time: Less than 24 hours.

💰 Cost: A fraction of the price of traditional signage.

✨ Quality: Flawless.

Why outsource when you have a powerhouse print farm down the hall? 😉

26/06/2026

Print more, waste less. The Bambu Lab H2C saves up to 40-65% on material waste compared to the H2S and H2D models, keeping your filament where it belongs - on the print bed.

Ready to upgrade? The H2C is on sale for just $3,199 until July 15th!

19/06/2026

Looking to upgrade your 3D printer setup before the end of the financial year?

Take advantage of tax-time savings with Thinglab’s EOFY Specials! We’ve marked down 95+ items, including 3D printers, post-processing equipment and materials.

Invest in your workflow today

15/06/2026

We’re putting certified Flame Retardant materials to the ultimate test.

Watch how quickly these materials self-extinguish! Whether we are printing with Bambu PC FR & PPS-CF, Formfutura ABS-FR & PLA-FR, or Formlabs FR Resin, safety is built-in. Every single one is UL94 V-0 certified - meaning flames are stopped dead in under 10 seconds.

Curious about bringing safety-certified materials into your own workflow? Reach out to our team today to chat options!

Stop waiting weeks for parts. Start printing them in hours. ⏱️Introducing the Formlabs Fuse X1—industrial SLS printing m...
15/06/2026

Stop waiting weeks for parts. Start printing them in hours. ⏱️

Introducing the Formlabs Fuse X1—industrial SLS printing made accessible. Designed to fit seamlessly into your workspace, it delivers high-quality, end-use parts with up to 50% lower costs than legacy systems.

🔹 61.5L Build Volume
🔹 3X Higher Throughput
🔹 5-minute print changeovers
🔹 Production-ready right out of the box

Ready to upgrade your manufacturing game? Reach out to the team at Freedspace to discuss your project or request a sample print!

🔗 Check it out: https://freedspace.com.au/products/thinglab/fuse-x1/

Yesterday, Seán and Ellie represented Thinglab at the Additive manufacturing Workshop at Swinburne Uni.From live product...
04/06/2026

Yesterday, Seán and Ellie represented Thinglab at the Additive manufacturing Workshop at Swinburne Uni.

From live product demos to deep-dive discussions on additive manufacturing, it was a great opportunity to engage local small-to-medium enterprises and show them some of the benefits of using Formlabs 3D Printers for their work. Thinglab is always ready to help SMEs discover new ways to scale and optimise their manufacturing workflows.

A massive thank you to the team at Swinburne University of Technology's Factory of the Future for organising and hosting such an diverse, forward-thinking event.

31/05/2026

Huge upgrade alert! We just installed the brand-new PEX2 extruder into toolhead 1 of our BigRep ONE.5—and the specs speak for themselves.

Compared to its predecessor, the PEX2:
- Is 600g lighter (hello, faster travel speeds!)
- Has a higher flow rate for quicker build times
- Is compatible with a wider range of materials
- Features dual-configuration, ready to print with both extruders simultaneously

Want to unlock this kind of performance on your own machine? If you're looking to upgrade your BigRep ONE.3 or ONE.4, we can make it happen.

Address

7a Kent Street
Yarraville, VIC
3013

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

+61396878638

Alerts

Be the first to know and let us send you an email when Thinglab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Thinglab:

Shortcuts

Share

Category

Nearby computer & electronics services