E-Boats Systems

E-Boats Systems Customised electric solutions for navigation at sea and on the road.

Installed and fully operational! ⚓️The custom control panel we built for Thomas is now live on his Sunbeam 36.Clean, org...
28/07/2026

Installed and fully operational! ⚓️

The custom control panel we built for Thomas is now live on his Sunbeam 36.
Clean, organised and ready for action — every circuit under control from a single, clearly labelled point.
Interchangeable labels, LED indicators, bilge pump alarms and 9-colour dimmable backlight all working perfectly onboard.

What the panel delivers:
-18 DC on-off channels (16A max)
-4 AC on-off channels (16A max)
-4 Bilge pump channels with On-Off-Auto (3×16A + 1×20A)
-Independent bilge alarm LEDs
-2× USB QC 3.0 + 12V socket
-9-colour backlight with dimmer
-Fully interchangeable labels

Another successful custom installation by E-Boats Systems.
Need a similar solution for your boat? Get in touch — we design and build exactly what you need.

E-Boats Systems
Solutions for everyday use.

Brand new custom build! ⚓️Fully custom control panel designed and built by E-Boats Systems for Thomas and his Sunbeam 36...
25/07/2026

Brand new custom build! ⚓️

Fully custom control panel designed and built by E-Boats Systems for Thomas and his Sunbeam 36.
Created to deliver a reliable, clear and intuitive interface: everything controlled from a single, well-organised point, with switches grouped by function and clearly labelled for instant identification.
The labels are fully interchangeable for maximum flexibility.

Key features:
-18 DC on-off switch channels
-4 AC on-off switch channels
-4 Bilge pump channels with On-Off-Auto function
-LED indicators for every function
-Independent bilge pump alarm LEDs
-2× USB QC 3.0 + 1× 12V socket
-9-colour backlight with dimmer
-Interchangeable labels

Built to marine standards, with clean wiring and long-term reliability in a demanding onboard environment.
Got a similar project in mind? Get in touch — we’ll help you create the system of your dreams.

E-Boats Systems
Solutions for everyday use.

🔧 Altaïr | Venus OS, DIY dual smart shunt, and a hand-built panel — even on holiday.Last December, near Barcelona, I was...
06/06/2026

🔧 Altaïr | Venus OS, DIY dual smart shunt, and a hand-built panel — even on holiday.

Last December, near Barcelona, I was asked to build and install a complete electrical panel on Altaïr, a sailing vessel. No parts warehouse: every component sourced locally, everything wired by hand on site.

At the heart of the system: a Raspberry Pi 3 running Venus OS — the DIY alternative to Victron's Cerbo GX, at a fraction of the cost — paired with a dual smart shunt built from scratch using an ESP32 and two INA226 sensors. Two battery banks monitored in real time (service + engine), DS18B20 temperature sensors integrated, everything visible on a 5" touchscreen mounted in the panel.

A few technical highlights covered in the article:
⚡ VE.Direct connection via FT232RL + galvanic isolation with ADUM1201
📡 ESP32 → Raspberry Pi via UART over GPIO, with a second ADUM1201
📊 Venus OS integration via MQTT
🌡️ DS18B20 sensors on 1-Wire bus directly on GPIO
🔋 Two INA226s on I²C for independent monitoring of both battery banks

Full article on the blog 👉 https://www.eboatsystems.com/post/venus-os-on-a-sailboat-diy-energy-monitoring-with-raspberry-pi-esp32-and-victron

Adresse

Vevey

Heures d'ouverture

Lundi 08:00 - 12:00
14:00 - 18:00
Mardi 08:00 - 12:00
14:00 - 18:00
Mercredi 08:00 - 12:00
14:00 - 18:00
Jeudi 08:00 - 12:00
14:00 - 18:00
Vendredi 08:00 - 12:00
14:00 - 18:00

Site Web

Notifications

Soyez le premier à savoir et laissez-nous vous envoyer un courriel lorsque E-Boats Systems publie des nouvelles et des promotions. Votre adresse e-mail ne sera pas utilisée à d'autres fins, et vous pouvez vous désabonner à tout moment.

Raccourcis

Partager

Type