Battery Tester

03/02/2023

Regenerative
It achieved almost 100% energy feedback and recycle used(the discharge energy will power the charge channel first, others go back to the grid). It saves the energy and economic.

Installation
It adopts modular design and ships in whole. Save the trouble to install. Simply connect the equipment to power and PC, the test can start right way.

Charge and Discharge Tester/Cycler/Analyzer CE6000 series is the sixth generation of Neware’s test equipment. It is suitable for research institutions, universities, battery production enterprises, new energy automobile manufacturers, battery users, etc.

01/02/2023

Neware’s Charge and Discharge Tester/Cycler/Analyzer can apply to battery(cell, module, pack), super-capacitor，BMS communication, UPS, manufacturing test and so on.
Support: grading, capacity, power, SOC, cycle life, simulation/drive simulation, DCIR, EV/HEV, HPPC, pulse tests and so on.
Data frequency: 10Hz，100Hz，1000Hz
Respond time: 500μs，100μs，1ms，3ms，20ms
Testing range: ≤1000V, ≤1200A
Channel: 1~512CH

BTS 4000 series is the fourth generation of Neware’s test equipment. It entered the market in 2008. After years of market testing, it has been highly recognized by the market for its excellent performance. It is suitable for research institutions, universities, battery production enterprises, new energy automobile manufacturers, battery users, etc.

BTS 4000 series can apply to all kinds of batteries(from cell to pack). What’s more, it also supports customizing. Such as, customize different voltage and current; add the AUX to test the battery interface temperature; add negative power to discharge the voltage to 0V or under 0V and so on.

01/02/2023

Neware’s Charge and Discharge Tester/Cycler/Analyzer can apply to battery(cell, module, pack), super-capacitor，BMS communication, UPS, manufacturing test and so on.
Support: grading, capacity, power, SOC, cycle life, simulation/drive simulation, DCIR, EV/HEV, HPPC, pulse tests and so on.
Data frequency: 10Hz，100Hz，1000Hz
Respond time: 500μs，100μs，1ms，3ms，20ms
Testing range: ≤1000V, ≤1200A
Channel: 1~512CH

BTS 4000 series is the fourth generation of Neware’s test equipment. It entered the market in 2008. After years of market testing, it has been highly recognized by the market for its excellent performance. It is suitable for research institutions, universities, battery production enterprises, new energy automobile manufacturers, battery users, etc.

BTS 4000 series can apply to all kinds of batteries(from cell to pack). What’s more, it also supports customizing. Such as, customize different voltage and current; add the AUX to test the battery interface temperature; add negative power to discharge the voltage to 0V or under 0V and so on.

17/01/2023

The battery cycle life test is the basis of Neware’s test equipment functions, 4000,5000, 6000, 8000, 9000 series can be implemented:
Battery cycle life test Principle:
For example, a lithium battery, the nominal charge and discharge cycle is not less than 80% of the nominal capacity after 500 times
1.Battery full charge to reach the rated voltage-4.2V;
2.Discharge the battery, cut off at 2.8V
3.Cycles (step 1&2)500 times
4.And then run charge and discharge for one time, the 501st discharge capacity compared with the original nominal capacity’s 80% to get the result
life --ion

13/01/2023

About Neware Founded in 1998, Neware specializing in R&D, manufacturing and marketing of battery testing systems. Our company did one thing only for the last 24 years i.

13/01/2023

The actual battery capacity test is the basic function of Neware test equipment, 4000 5000 6000 8000 9000 IGBT7000 series can be realized today with our popular CT-4008Tn-5V6A-S1 test 18650 (2000mAh 3.7V)
The actual battery capacity test theory:
1, the battery is fully charged to reach the rated voltage, generally 4.2V; The cut-off current is generally set to 0.02C -- 0.05C.

2, the battery discharge, cut-off voltage is generally 2.8V. The discharge capacity in this step is the actual capacity of the battery.

12/01/2023

What is the perfect equipment for coin cell testing? How can this equipment help with your research?

The equipment supports running all the tests below under the temp-range of 0℃～60℃:

Charge and discharge

Cycle life

HPPC

Pulse

Simulation

DCIR

Etc.

cell

10/01/2023

HPPC(Hybrid Pulse Power Characterization)



HPPC is an important test method for characterization and power management of battery systems, modules and cells used in hybrid electric vehicles. This article mainly describes the test principle and method of HPPC. What’s more, what equipment is suitable for HPPC test. The practical application of HPPC will be shared in the future. Please continue to pay attention.

HPPC is an important test method for characterization and power management of battery systems, modules and cells used in hybrid electric vehicles. This article mainly describes the test principle and method of HPPC.

16/12/2022

An example for how I helped the new Mobility/EV start-up users to get to know about our equipment’s function.
To sum up with, the customer’s questions are:
1. How the testing processing goes?
2. Data traceability
3. BMS communication
Testing of voltage cells
Testing of ACIR (DCIR)
Activated thermography checking(temp-detecting)
# BMS cell

The suitable equipment for customer’s battery testing Q1:How the testing processing goes?After the software installation and connection with the tester (pls check the previous article for details) Start the software and you will see this page follow the structions to run the test. Q2:Data traceabi...

15/12/2022

About the construction of the connection between tester and the software. Useful to the first time users and the researchers that might want to get to know about our equipment.

Steps for connecting: 1. Plug in the power supply 2.