Autool TECH

Autool TECH We are AUTOOL: Pioneering automotive tools since 2014, meeting you in 160 countries.

31/07/2026

More pressure doesn’t always mean better walnut blasting. 🌰

A common mistake for first-time users is turning the pressure all the way up, hoping for faster carbon removal.

But excessive pressure can:
❌ Waste walnut shell abrasive
❌ Make blasting harder to control
❌ Affect cleaning consistency

The better approach?

Start low. Test the spray pattern. Adjust step by step.

The perfect blast is not the strongest one — it’s the one you can control. 🔧

What pressure do you usually run for walnut blasting?

28/07/2026

A great automotive tool is not only about what it can do — it’s also about the support behind it.

At AUTOOL, we believe reliable products should come with reliable service.

That’s why we provide:
🔧 3-year warranty for main units
🔧 1-year warranty for accessories
🔧 Faster support through local teams in the U.S. and Europe

From everyday maintenance to professional diagnostics, AUTOOL is committed to supporting users worldwide.

Thank you for trusting AUTOOL. We’ll continue improving our products and services to support your work.

27/07/2026

⚠️ Stop Blowing Your Multimeter Fuse!

A blown fuse doesn’t always mean your multimeter has a problem.

✅ Voltage measurement → Use the VΩ port
✅ Current measurement → Use the A/mA port

A quick 2-second check can help protect your meter and avoid unnecessary downtime during diagnostics.

Have you ever blown a multimeter fuse by mistake? Share your experience below 👇

23/07/2026

One nozzle tube can’t handle every engine. 🔧

That’s why the AUTOOL HTS728 comes with 7 nozzle tubes to help technicians reach different cleaning areas and improve carbon removal efficiency.

Have you ever struggled with hard-to-reach carbon buildup? 👇

20/07/2026

Just like hardened grease becomes easier to remove when heated, carbon buildup on fuel injectors and throttle bodies also softens with heat. This helps ultrasonic waves break down deposits more effectively—even in tiny passages that are difficult to reach.

AUTOOL CT85 combines:
✅ Adjustable heating from 10°C to 60°C
✅ Dual-frequency ultrasonic technology
✅ Continuous degassing circulation

From fuel injectors to throttle bodies, achieve deeper cleaning with less effort.

A cleaner part means better performance. 🚗🔧

15/07/2026

Clean deeper. Reach further. Remove more. 🔥

Carbon deposits, grease, and dirt can hide in places you can’t reach.

AUTOOL CT85 combines degassing circulation and dual-frequency ultrasonic cleaning to deliver powerful cleaning for fuel injectors, throttle bodies, and automotive parts.

13/07/2026

our multimeter says everything looks normal… but the problem is still there.

Many automotive electrical faults don't show up as abnormal voltage—they show up as abnormal heat.

With the AUTOOL DM208, you can combine thermal imaging and multimeter testing in one device. Instantly spot overheating circuit boards, fuse boxes, poor connections, and overloaded components without endless probing.

🔥 Less guessing.
⚡ Faster diagnosis.
🔧 Smarter troubleshooting.

Have you ever found a fault that a standard multimeter couldn't detect? Tell us in the comments!

09/07/2026

ABS warning light still on after replacing the sensor? The problem might be hidden inside the control module.

A tiny capacitor can cause a big failure.

Its capacitance may look normal, but the D-value reveals the real condition of the component.

Don’t replace expensive modules before finding the actual fault.

AUTOOL DM103 helps technicians discover hidden problems.

Have you ever found a fault caused by a small component?

07/07/2026

Your multimeter is powerful… but it can’t tell you everything. 🔧

A normal resistance reading doesn’t always mean a component is healthy.

For advanced PCB and ECU repair, technicians often use an LCR tweezer to check deeper parameters like D value and Q value—helping identify aging or abnormal components that basic tests may miss.

AUTOOL DM103 helps technicians make more accurate repair decisions.

What tool do you use most for circuit board troubleshooting?

👇 Share your experience.

03/07/2026

Still switching between resistance, capacitance, and inductance modes?

The AUTOOL DM103 automatically recognizes the component you're testing, helping you diagnose PCBs and ECUs faster.

Would this save time in your workshop?

Address

Room 1303, 13th Floor, Building 1, Runzhi R&D Center, No. 5 Runfang Road, Zone 70, Xingdong Community, Xinan Subdistrict, Bao'an District, Guangdong
Shenzhen
518000

Opening Hours

Monday 09:00 - 18:30
Tuesday 09:00 - 18:30
Wednesday 09:00 - 18:30
Thursday 09:00 - 18:30
Friday 09:00 - 18:30

Telephone

+8675527807580

Website

Alerts

Be the first to know and let us send you an email when Autool TECH posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Autool TECH:

Shortcuts

Share