Maxtop LED Display

Maxtop LED Display Maxtop, a leading high-tech enterprise based in Shenzhen, China, specializes in the research, development, and production of premium LED display solutions.

2026/11/13

GOB P2.3 curved LED wall: AC Series Type B

2026/11/11

AU series GOB P2.6 flexible LED screen. Ready ship to Spain.
✅Flat, Curve, S shape
✅With 0 to 45° adjustment in 2.5° increments
✅Indoor P1.9 P2.6, Outdoor P2.9 P3.91
✅Precision & Durability
✅GOB/ HOB Technology
✅Quick Installation
✅Corner protection

What if one LED cabinet could cover almost every layout your clients ask for?The AC-50 Series from MAXTOP — 500 × 500 mm...
2026/11/10

What if one LED cabinet could cover almost every layout your clients ask for?

The AC-50 Series from MAXTOP — 500 × 500 mm rental LED cabinets — builds four ways from the same panel:
• Straight wall — clean backdrop, seamless finish
• Curved — smooth arcs for depth and camera sweeps
• 90° corner — wrap booth edges with no gap
• Cube — freestanding 3D structure, no truss re-design

For rental companies, the benefit is structural, not cosmetic:
— one cabinet SKU instead of four product lines
— one spare-parts pool for every project
— faster load-in and shorter reconfiguration between shows

Feedback from our Middle East client was clear: the flexibility of one cabinet covering four shapes is what keeps them re-ordering.

2026/11/07

Some LED screens get built on site. This one was built, tested and signed off in our workshop — and it's now on its way to Barcelona.
We assembled a doorway-shaped LED screen using our AC-50 series, D version, P1.9 pixel pitch. Every cabinet, seam and edge was checked here before packing, because a custom-shaped screen has to arrive ready to perform.
What it shows:
🔹 P1.9 fine pitch — crisp, high-detail images even at close viewing distance
🔹 AC-50 D cabinets — assembled into a doorway configuration
🔹 Workshop pre-build — shape, alignment and wiring verified before shipping
🔹 Destination: ISE 2027, Barcelona — on display at our booth

2026/11/05

Hoisting an LED wall is where setup time disappears — panels go up, hardware comes out, and every step happens at height.
The GT series cuts that down with a quick-lock device designed into the top of every cabinet. Panels seat onto the flown structure and lock in a single motion, so the wall builds faster from the first row to the last.
What it changes on site:
🏗️ One-motion locking — no loose hardware to handle up in the truss
⚡ Dramatically faster hoisted builds — the lock is the connection, not an extra step
🙌 Less time working at height — fewer hands, shorter exposure
🔁 Consistent across the wall — the same reliable lock on every panel

2026/11/04

Outdoor stages are full of curves — arches, waves, tunnels, sweeping facades. So why do most LED screens stay flat?
The outdoor AU series is our answer: a flexible 500×500mm LED panel that bends up to 45° per unit, engineered for permanent outdoor creativity and rental builds alike.
What makes it different:
✅ Up to 45° bend per cabinet — build waves, cylinders, arches and flowing ribbons that flat panels can't follow
✅ Outdoor-ready construction — designed for festivals, building facades and open-air stages
✅ Splices with the AC-100 series — combine curved AU sections with flat AC-100 LED walls in one seamless screen
✅ Creative freedom without custom tooling — the curve comes from the cabinet, not from a one-off engineering project
For rental companies and integrators, that means one flexible product line covering both standard walls and the curved showpieces that win pitches.

2026/11/02

What does it take to build a perfect LED wall? Our answer is one person — and the GT-50 series.

Every GT-50 panel packs the features rental crews keep asking for:

🎯 Two side locating balls — panels self-align into an ultra-flat surface as they join, with no measuring or seam re-adjustment
💪 Side handle + top handle — carry comfortably from any angle, in any position on the wall
🔒 Fast-lock system — true one-person installation, panel after panel
🏗️ Hoisting and stacking support — fly it or ground-stack it, one cabinet handles both rigging styles
🔌 Neat internal cable routing — clean connections, safer builds, faster troubleshooting
🧩 GT-100 compatibility — splice the two series together when your stage calls for a bigger canvas

From concert stages to exhibitions and corporate events, the GT-50 turns setup day into a one-person job — without compromising flatness or safety.

2026/10/30

When an LED wall isn't perfectly flat, everyone sees it — light catches the seams, pixels look uneven on camera, and your client notices before you do.

That's why the GT-50 series puts its locating balls on the side of the cabinet. As panels join, the side-mounted balls guide them into exact alignment, so every seam lands ultra-flat on the first try.

What that means on site:

⚡ Faster splicing — panels self-guide into position, no measuring or re-adjusting seams
📐 Higher flatness — consistent panel-to-panel precision across the whole wall
🙌 One-person friendly — pairs with our fast-lock system, so a single tech can build alone
🏗️ Room to grow — splices with the GT-100 for larger configurations

For rental companies, faster splicing and flatter walls aren't just nice-to-haves — they're shorter setup times, happier crews and screens that look premium on every camera.

Ask any rental house what eats the margin and you'll hear the same answer: the hours, not the hardware.A LED screen that...
2026/10/29

Ask any rental house what eats the margin and you'll hear the same answer: the hours, not the hardware.

A LED screen that needs two people, a level and a walkie-talkie just to get plumb costs you twice — once on build, once on strike. Multiply that by forty weekends and the install crew quietly becomes your biggest line item.

This is the part of the market nobody films. Trade show floors are full of pitch specs and nits, and almost nobody talks about how long the thing takes to stand up.

The numbers are catching up with that. Rental buyers now put assembly speed at the top of the list — under 15 minutes per square meter — above brightness, above refresh. And since most modules still can't be calibrated remotely, that time gets spent on site, in the dark, with a torch in your mouth.

So the GT-50 was designed around that problem instead of around a spec sheet:
✅ Dual positioning ball — the cabinet locates and levels itself as it locks. No spirit level, no shims, no arguing about whether the floor is flat.
✅ Side and top handles — one person can lift and seat a 500×500 cabinet, no second pair of hands needed.
✅ Single-person quick lock — the wall goes up solo, and comes down solo at 2am.
✅ Cabling runs inside the frame — nothing to snag, nothing to trip over, nothing dangling behind the wall.
✅ Hangs or stacks on the same cabinet, and locks straight into GT-100. New batches extend the fleet you already own instead of orphaning it.

Building curves or rounded shapes? The AC-RC and AU cabinets bend up to 45° each and clip into the same grid — that's how you get a ribbon wall with real corners without paying for custom steel.

Real question for the rental folks here: how many people does it take to build your biggest wall, and has that number gone up or down this year?

2026/10/28

Behind every bright LED screen is a power system most people never see — until it fails.

In our AC series LED cabinets, the power supply is connected using copper post hard connections instead of ordinary wire connectors. It's a small engineering decision with a big impact:

⚡ Lower contact resistance — copper conducts with minimal loss, so less energy turns into heat
🌡️ Better heat dissipation — heat moves away from the connection point instead of building up around it
🔥 Improved flame-retardant performance — a cooler, more stable power path means a safer cabinet for long-duration shows
💪 Built for rental life — solid metal-to-metal contact holds up through thousands of installs, strikes and transport runs

For rental companies, that means fewer power faults on site, less downtime, and a screen you can trust at your biggest events.

👉 What's the most important "invisible" feature when you choose an LED cabinet — connectors, cables, or the power supply? Comment below.

Address

518000
Shenzhen
Room 201, 301, No. 128, Industrial Boulevard, Fucheng’ Ao Community, Pinghu Sub_district, Longgang District

Alerts

Be the first to know and let us send you an email when Maxtop LED Display posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Maxtop LED Display:

Shortcuts

Share

Nearby computer & electronics services