Maker PCB

Maker PCB Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Maker PCB, Electronics Company, Aimeite Electrical Industrial Park, Shiyan Street, Baoan District, Shenzhen.

Your One-Stop Solution for PCB + Assembly manufacturing services ISO9001+IS014001 | Design and Development | Component Sourcing | Email us [email protected]

"Box build" is where your PCBA becomes a product — not just a board. 📦Too many hardware teams nail the circuit board, th...
26/08/2026

"Box build" is where your PCBA becomes a product — not just a board. 📦

Too many hardware teams nail the circuit board, then stall at the final mile: enclosure fit, cabling, firmware flashing, testing, and retail packaging. That's exactly what box build assembly solves.

What a full turnkey box build actually includes (5 tiers):
1️⃣ PCBA manufacturing — SMT/THT + 3D AOI + X-ray for BGAs
2️⃣ Enclosure & cabling — molding, stamping, CNC, custom wire harnesses
3️⃣ Electromechanical integration — torque control, thermal pads, display/battery mount
4️⃣ Firmware & system FCT — automated flashing, RF calibration, burn-in
5️⃣ Packaging & logistics — retail kitting, ESD pack, FOB/DDP customs

Why Shenzhen?
🌏 World's densest electronics supply chain — distributors, molders, cable shops, packaging printers all within hours. One partner = one accountable quality chain. Scale from 50-unit pilot to 50,000-unit mass production on the same floor.

⚠️ The quote trap to avoid:
A cheap "assembly labor only" quote often excludes tooling NRE, custom harnesses, real FCT jigs, and DDP freight. Always compare line-by-line — visual power-on ≠ tested product.

Never ship on visual inspection alone. Demand 3 levels of test:
✅ ICT (bed-of-nails: shorts/opens/values)
✅ FCT (every port, wireless, display powered)
✅ Burn-in (thermal chamber, kill early failures)

🔒 Protecting IP in China:
• Sign a bilingual NNN agreement (Non-Disclosure, Non-Use, Non-Circumvention) under Chinese law — not a Western NDA
• Own 100% of your molds, dies & test fixtures
• Flash proprietary firmware in an isolated, encrypted environment

At MakerPCB we run all five tiers under one roof — eliminating the tolerance gaps between your enclosure and internals.

👉 Upload your Ge**er, BOM & 3D CAD for an end-to-end quote.

We just checked our live order board this morning. The numbers tell the story better than any brochure:→ 3,227 orders in...
17/08/2026

We just checked our live order board this morning. The numbers tell the story better than any brochure:
→ 3,227 orders in the past 30 days
→ 737 in the last 7 days
→ 83 shipped today — and counting
From 5-piece prototypes to 3,000-piece runs, hardware teams across the US, UK, Germany, Israel and beyond trust MakerPCB for one reason: we make sourcing simple.
Instant online quote. PCB + PCBA in one place. No minimums that punish bootstrapped teams.
👉 See the live board & get a quote: makerpcb.com
What's the longest you've waited for a prototype? Drop it below 👇

08/08/2026

We shipped 3,199+ boards last month. The same 3 mistakes showed up in most of them. 🔧

Not manufacturing mistakes — design mistakes that pass inspection, then fail in the field:

1. Traces sized for the bench, not the load (works once, dies under real current)
2. No test points (debugging becomes guesswork)
3. Silkscreen that lies (wrong polarities, missing designators)

None of these get caught by a "yes we can build it" supplier.
They get caught by a DFM review — before a single board is cut.

At MakerPCB, that review is free, and it happens before you spend a cent.

What's the most expensive board mistake you've learned the hard way? 👇

We designed and built this. Every trace. Every layer. Every amp.This is the TRONIC X12 — a 24S, ~380A peak VESC motor co...
07/08/2026

We designed and built this. Every trace. Every layer. Every amp.

This is the TRONIC X12 — a 24S, ~380A peak VESC motor controller. It's our own product. And every PCBA inside it was engineered and manufactured by MakerPCB.

Pushing 380 amps through a board isn't a routing exercise. It's copper weight, thermal vias, layer stack-up, current-sense accuracy, and EMI discipline — designed so it doesn't cook itself under load.

We didn't outsource the hard part. We did it in-house:
→ Schematic & PCB layout
→ High-current power-stage design
→ SMT + selective hand assembly
→ In-house test & burn-in
→ DFM feedback loop

That's the same rigor we bring to your project — whether it's a 2-layer prototype or a production run of complex, high-reliability PCBA.

3,199+ orders shipped in the last 30 days. 60+ countries. One team accountable from Ge**er to delivery.

Got a board your current supplier calls "too hard"? Send us the Ge**er. Let's talk.

03/08/2026

A "good" solder joint has 3 tells. Most people can't name one. 🔍

Watching one of our boards go through soldering right now — and it's a great excuse to talk about what actually separates a reliable PCB from a liability.

3 things we check on every joint:
1️⃣ Shiny & concave — a dull, ball-shaped joint means it cooled wrong (cold joint = future failure)
2️⃣ No bridges — one speck of solder between pads = a short you'll find on the road, not the bench
3️⃣ Fully wetted — the solder must bond to both the pad and the lead, not just sit on top

Automated SMT handles most of it. But prototypes, through-hole, connectors, and high-current paths? Those still want a human with a steady hand — and a second inspection.

At MakerPCB, soldering is one step in a full custom build:
🔹 PCB fab (prototype → volume)
🔹 SMT + selective soldering
🔹 Hand assembly for the parts machines can't
🔹 100% electrical test before ship
🔹 Your design, your BOM, fully customized

3,199+ orders shipped in the last 30 days, 60+ countries. From a 5-piece prototype to 10k units — built your way.

Building something? Tell us what you're working on. 👇

This is what "we build it" actually looks like. 🏭No middlemen. No mystery. Just one of our SMT lines placing components ...
30/07/2026

This is what "we build it" actually looks like. 🏭

No middlemen. No mystery. Just one of our SMT lines placing components at speed, in-house at MakerPCB.

When you send us a BOM, it doesn't get forwarded to a faceless factory. It hits our own line — engineered, placed, soldered, tested, and shipped under one roof.

That's the difference between a trading company and a real ODM/EMS partner:
✅ DFM feedback before a single board is cut
✅ Transparent lead times you can plan around
✅ One accountable team from Ge**er to enclosure

We shipped 3,199+ orders in the last 30 days, for customers in 60+ countries. This line is part of why.

Follow for more behind-the-scenes from our floor. 🔧

What's the longest lead time you've been quoted on a prototype? 👇

28/07/2026

We build the boards that build your product. 🔧
We're MakerPCB, an ODM/EMS manufacturer helping hardware teams go from idea to enclosure without the usual friction.

Here's what we do under one roof:
→ PCB fabrication (prototype to volume)
→ SMT & through-hole assembly
→ Component sourcing & BOM management
→ Box build & functional testing
→ Electronic & mechanical design support

And the numbers that keep us honest:
📦 3,199+ orders shipped in the last 30 days
🌍 Customers in 60+ countries
⚡ Same-week prototyping, volume pricing at any scale

Whether you're a solo founder with a Ge**er file or a procurement lead scaling to 10k units — we're built to move at your speed.

Follow along for PCB tips, factory insights, and behind-the-scenes from our lines. 👋

What's the longest you've waited on a prototype? 👇

Hardware Founders: Does This Timeline Sound Familiar?Week 1: You send your design to a PCB supplier.Week 3: They ship th...
22/07/2026

Hardware Founders: Does This Timeline Sound Familiar?
Week 1: You send your design to a PCB supplier.
Week 3: They ship the boards — two weeks late.
Week 4: SMT assembly — done by someone else.
Week 6: Enclosures arrive from a third vendor.
Week 7: You realize the holes don't line up.

Your launch is now off the rails.

Here's what we hear from hardware founders every week:
"We spent more time chasing suppliers than engineering."
"Batch A worked. Batch B failed AOI. No explanation."
"They told us 'no minimum order' — then came back and said 500 MOQ."

Sound like your experience?
We built MakerPCB to fix exactly this.
✅ One partner — PCB, SMT, enclosures, final assembly, all in-house.
✅ Small batches welcome. 10 units, 50 units, 100 units — we take them.
✅ Full QC. Every board tested — not sampled.
✅ Complex designs? Drones, motor drives, smart hardware — we do them.

No vendor juggling. No surprises. No MOQ gatekeeping.
Question for the founders and procurement leads here:
What's the biggest supply chain headache you've dealt with this year?

👇 Drop it below. We read every single one.
Have a project in the works? DM me "MAKER" and I'll send you our capability deck + a quick reference quote.

3D printing isn't new.But 3D printing inside a PCB factory?That changes the game.Here's what most hardware teams don't r...
21/07/2026

3D printing isn't new.
But 3D printing inside a PCB factory?

That changes the game.

Here's what most hardware teams don't realize:

You can design the perfect PCB. You can source the best components. You can assemble everything with precision.

But if your enclosure doesn't fit — or worse, if you don't know it doesn't fit until the parts arrive — you've just lost 2-3 weeks and a chunk of your prototyping budget.

At makerPCB, we've added 3D printing to our in-house capabilities — and we did it for one reason:

Mechanical validation should happen alongside electrical validation. Not after.

Here's what this means for your project:

1. Same-day fit testing
We print your enclosure while your PCBA is in production. By the time your boards are done, we've already validated the fit.

2. Design iteration without delay
Found a clearance issue? We can tweak the STL, re-print, and re-test within hours — not weeks.

3. Full accountability
No more "the PCB guy says it's the enclosure guy's fault." We own both. We solve both.

We manufacture custom PCBA, PCB fabrication, and now 3D-printed enclosures and brackets — all in-house, ISO-certified, supporting small to medium batches.

Question for the engineers and product leads:
What's your current process for validating mechanical fit with your PCB designs?

👇 Comment below — I'd love to hear how teams are handling this.

Want to see our 3D printing setup? DM me "FACTORY3D" and I'll send you our production workflow + a sample print quality report.

Here‘s what most people don’t realize about PCB manufacturing:The difference between a “board” and a “reliable board” is...
20/07/2026

Here‘s what most people don’t realize about PCB manufacturing:
The difference between a “board” and a “reliable board” isn‘t visible to the naked eye.

It’s in the processes you never see.

At makerPCB, our factory runs on four pillars:

1. ISO-certified Quality Management
ISO 9001 isn‘t just a badge. It means documented SOPs for every single step — from incoming material inspection to final shipping. Consistent processes = consistent boards. Batch after batch.

2. AOI on Every Board
Automated Optical Inspection catches what the human eye misses — tombstoned components, insufficient solder, misalignment. We run AOI on 100% of assemblies, not just spot checks.

3. Full SMT + Reflow In-House
No outsourcing. No handoffs. Our SMT lines, reflow ovens, and testing stations are all under one roof. Full control = full accountability.

4. Functional Testing Before Shipping
We don‘t just check if it looks right. We check if it works right. Every assembled board goes through functional validation before it leaves our door.

Why this matters to you:
When your boards arrive, you’re not troubleshooting.
You‘re building.

We manufacture custom PCBA for drones, motor controllers, smart hardware, and industrial devices — small to medium batches, full turnkey, ISO-certified.

Question for the engineers and procurement folks:
What’s the #1 quality check you wish every PCB supplier would run — but most don‘t?

👇 Comment below — I’ll tell you how we handle it.

Want to see our factory process? DM me “FACTORY” and I‘ll send you our production flow chart + quality control checklist.

Address

Aimeite Electrical Industrial Park, Shiyan Street, Baoan District
Shenzhen
518108

Opening Hours

Monday 09:00 - 18:00
Tuesday 09:00 - 18:00
Wednesday 09:00 - 18:00
Thursday 09:00 - 18:00
Friday 09:00 - 18:00
Saturday 09:00 - 18:00

Telephone

+8675528687397

Website

Alerts

Be the first to know and let us send you an email when Maker PCB posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Maker PCB:

Shortcuts

Share

Category