Phytec

Phytec Alle Standardmodule werden serienmäßig mit hardwarespezifischen Board-Support-Packages (BSPs) ausgeliefert.

PHYTEC ist seit mehr als 30 Jahren ein innovativer Technologiedienstleister für die Entwicklung und Produktion von Embedded Komponenten für den industriellen Serieneinsatz PHYTEC entwickelt und produziert Mikrocontroller-Module, Single Board Computer und Komplettlösungen für den Einsatz in industriellen Serienprodukten und bietet professionelle Softwareunterstützung – von Betriebssystemen bis hin zu applikationsspezifischer Basissoftware. Durch Vorleistungen im Hardware-Design und insbesondere auch in der Bereitstellung von Basissoftware bietet PHYTEC ihren Kunden optimale Voraussetzungen, um Entwicklungskosten zu senken und schneller mit neuen Produkten am Markt zu sein. Diese garantieren die Optimierung des Betriebssystems und eine angepasste Einstellung auf die jeweiligen Hardwarekomponenten. Bei den Betriebssystemen legt PHYTEC Schwerpunkte auf Mainline-Linux und auf Windows Embedded in industrietauglicher Implementierung, für Ihre individuelle Lösung steht Ihnen auch Android zur Verfügung. Im Bereich der industriellen Bildverarbeitung ist PHYTEC zuverlässiger OEM-Partner für die Integration von Bildverarbeitung in Ihr Produkt. Neu ist unsere Hard- und Software im Bereich Internet of Things (IoT). Als Familienunternehmen 1986 gegründet, beschäftigt PHYTEC heute mehr als 200 Mitarbeiter in Niederlassungen in Frankreich, USA, Indien und China. Die Technologien des Unternehmens bewähren sich seit nunmehr 28 Jahren unter anspruchsvollsten Bedingungen in den unterschiedlichsten Branchen wie in der Medizintechnik, Avionik, Gebäudeautomation, Antriebstechnik oder Automobilindustrie. International:

Phytec France:
www.phytec.fr

Phytec America:
www.phytec.com

Phytec India:
www.phytec.in

Phytec China:
www.phytec.cn

Polish:
www.phytec.pl

Russian:
www.phytec.ru

Four days at electronica, full speed 🚀 from the first hour to the last, and you still look like this on Friday. That say...
13/11/2026

Four days at electronica, full speed 🚀 from the first hour to the last, and you still look like this on Friday. That says more about this team than any booth could. And this is not even all of you.

Thank you to everyone who made this week possible: our colleagues back home who kept everything running while we were in Munich, our partners who worked alongside us, and the electronica team for putting this together every two years.

But most importantly, thank you to everyone who came by. For the questions, the projects you brought along and the conversations that went far beyond a quick booth visit.

electronica 2026 is coming to an end. Get home safe, have a great weekend, and see you in two years. ✌️

12/11/2026

phyHUB is live. It is our new platform for updating and managing devices in the field, hosted and operated by us, so you connect your devices and get started without hosting your own server.

Updates roll back automatically if something goes wrong, you see the status of every device, and phyHUB shows known vulnerabilities based on the SBOMs of our BSPs. Our product manager Jens Boll walks through it in the video.

Want to see it live? Jens is on the booth, Hall B5, Booth 229, until Friday.

12/11/2026

Pull a screw out of the drawer at the NXP booth, and the system tells you what it is before you put it down.

The demo is called Screw Loose, a real-time, AI-accelerated perception model demo that we built together with NXP and Au-Zone. It identifies fasteners placed on the tray in real time, with a confidence score for each one, even when parts overlap or look almost identical.

The Nuts and Bolts:
◆ Our phyFLEX-iMX 959 on the Libra board
◆ phyVision's phyCAM-L for vision
◆ NXP's Ara240 DNPU for AI acceleration
◆ Au-Zone's EdgeFirst AI Model

If you visited our own booth: the module recognition demo there uses the iMX 959 with a Hailo-8. Same processor, different AI accelerator, both on PHYTEC hardware.

Screw Loose is at the NXP booth, Hall C5, Booth 179, until Friday.

12/11/2026

An industrial gateway you upgrade by swapping the processor module, not by redesigning the device. That is the new phyGATE-Tauri-M, and Samuel Music walks you through it in the video.

It is a DIN rail IoT gateway that connects machines and sensors to higher-level systems, ready for your own application software. The processor sits on an FPSC module, and because all FPSC modules share the same footprint and signals, you can change the processor later and keep the gateway.

If you want to see it in hand, ask Samuel or Mario on the booth. Hall B5, Booth 229, until Friday.

or check it out here:
https://eu1.hubs.ly/H0zPjtS0

11/11/2026

Pick up a module, and the screen tells you which one it is, even though many of them look almost identical. The video shows our module recognition demo from start to result.

Two cameras do the work, one monochrome for contrast and one color. Next to it, Martin Podolszki runs a guided training, so you can see how the AI model learned to tell the modules apart. Everything runs on phyVIP with the iMX 95 and a Hailo-8 AI accelerator.

The best part: the demo is open source. Link in the first comment.
Come by and try it: Hall B5, Booth 229, until Friday.

11/11/2026

Day two, and Lena Zimmermann with news from the FPSC presenter: new modules and two new partners, Qualcomm and Synaptics.

That makes 10 processors, 5 partners, 1 standard.

FPSC stands for Future Proof Solder Core. Mandatory and optional signals are the same across a feature set, so you can swap the SoM and keep your Carrier Board.

Also new: the FPSC Single Board Computer, a ready-to-run board with a phyFLEX FPSC SoM already on it. And the phyFLEX-Mapper: FPSC modules are solder-down by design, the mapper adds a plug connection for evaluation, so you can swap SoMs on the Baseboard in seconds.

If you want to see what interchangeable System on Modules look like in hardware rather than on a slide, this is the place to stand. Hall B5, Booth 229, until Friday.

Day one at electronica is done. Busy from the first hour, and a day of concrete projects rather than small talk.The phot...
10/11/2026

Day one at electronica is done. Busy from the first hour, and a day of concrete projects rather than small talk.

The photos are from the booth today. No demo shots this time, just the conversations, because that is what the day was about.

Three more days. Hall B5, Booth 229, 9 to 6. Thanks to everyone who came by.

10/11/2026

Welcome to electronica 2026. We are in Hall B5, Booth 229.
We just spotted Oliver Kahn across from our booth. No footballs on our side, but plenty of System on Modules.

What you will find on the booth this week:
• FPSC modules, shown next to the phyCORE family
• phyVIP for Embedded Vision
• phyHUB for device updates and management
• The new module recognition demo
• Custom Carrier Board and gateway design
• Zephyr
• CRA-compliant Linux
• Scalable Security Packages

We are here until Friday. Come by and bring your questions.

Munich, the day before electronica. The booth is up, the last demos are being finished, and everything gets one more tes...
09/11/2026

Munich, the day before electronica. The booth is up, the last demos are being finished, and everything gets one more test run before tomorrow.

The photo with the two lights is our new module recognition demo.
Martin is still setting it up, and it is worth a detour. Come by and try it.

Doors open tomorrow at 9. Hall B5, Booth 229.

06/11/2026

This is our electronica trailer from 2024.

Watching it now: no phyVIP, no FPSC, no AI demo. None of that existed yet.

Next week in Munich the table is fuller, and the one thing we want you to try is the demo. More than 15 modules laid out, you pick one up and the screen tells you which one it is, with the specs. Grab two and it compares them. We’re curious how people play with it.

FPSC, phyVIP and phyHUB are all there too, plus custom Carrier Board and gateway design, Zephyr, CRA-compliant Linux and Scalable Security Packages, if that’s what you came for.

📅 November 10–13 · 📍 Messe München, Hall B5, Booth 229

If you’d rather have a fixed time with us, the booking link is in the first comment.

Which module would you pick up first?

Adresse

Barcelona-Allee 1
Mainz
55129

Öffnungszeiten

Montag 08:00 - 17:00
Dienstag 08:00 - 17:00
Mittwoch 08:00 - 17:00
Donnerstag 08:00 - 17:00
Freitag 08:00 - 17:00

Benachrichtigungen

Erfahren Sie als Erste/r von Neuigkeiten und Aktionen: Wir schicken Ihnen eine E-Mail, wenn Phytec etwas veröffentlicht. Ihre E-Mail-Adresse wird für keinen anderen Zweck verwendet, und Sie können sich jederzeit abmelden.

Service Kontaktieren

Nachricht an Phytec senden:

Verknüpfungen

Teilen

Kategorie

Computer- Und Elektronikservices in der Nähe