Cable Management Warehouse Ltd

Cable Management Warehouse Ltd We are a cable management, network and data product supplier with competitive pricing, holding massi

Pre-terminated cabling means what happens on site is installation, not termination, no field splicing, no on-site test a...
02/09/2026

Pre-terminated cabling means what happens on site is installation, not termination, no field splicing, no on-site test and fix before the run's even live. Hellermantyton Connectivity RapidNet cassette-based system houses every termination with full protection and strain relief built in, across both fibre and copper. ULTRA cassettes push fibre density further too, which matters when cabinet space is already tight. Built for data centres, offices, and healthcare or education sites where downtime isn't an option. Talk to us about RapidNet for your next project ☎️ 01234 848030.

A lot of people know us for DSX hire and don't realise splicing kit is part of our fleet too. Every fusion splicer we hi...
02/09/2026

A lot of people know us for DSX hire and don't realise splicing kit is part of our fleet too. Every fusion splicer we hire out is pre-stripped, cleaned, electrode tested and fully function checked before every hire. Its own process, separate from what our certification kit goes through, but to the same standard. If a job needs splicing as well as certifying, it's worth knowing that you can get both from the same place. Speak to the CMW hire team by calling ☎️ 01234 848030.

Floor boxes go wherever the layout needs them, putting sockets at the point of use rather than routing cable back to the...
01/09/2026

Floor boxes go wherever the layout needs them, putting sockets at the point of use rather than routing cable back to the nearest wall. The lid closes flush when they're not in use, so nothing's left sitting proud of the floor as a trip risk. We stock a range of floor boxes, single and multi-compartment, for power, data, or both together. Call ☎️ 01234 848030 to check what's available for your next job.

A unit away for calibration is a unit you don't have, and jobs don't usually pause to wait for it to come back. Hire a r...
01/09/2026

A unit away for calibration is a unit you don't have, and jobs don't usually pause to wait for it to come back. Hire a replacement for the calibration window, so testing carries on while your own kit's being serviced. Call the CMW hire team on ☎️01234 848030 to check availability for your next calibration gap.

A GOP box that turns up without the gland to go with it doesn't stay a small thing for long, it's the last connection on...
28/08/2026

A GOP box that turns up without the gland to go with it doesn't stay a small thing for long, it's the last connection on the job, and it's the one holding everything else up. The full GOP box range is stocked alongside the glands, conduit entries, and brackets it needs. Ordered together rather than chased down separately once you're already on site with the box open. Source the full range in one order from CMW ☎️01234 848030.

A splicer that shows READY the second you switch it on isn't down to luck, it's down to what happens to it before it rea...
28/08/2026

A splicer that shows READY the second you switch it on isn't down to luck, it's down to what happens to it before it reaches you. The Fujikura 100S units we hire out are checked, cleaned and function tested before every hire, so what's on screen when you switch it on is a unit that's actually ready to work, not just powered up. Check availability with the CMW hire team ☎️ 01234 848030.

Different jobs need different splicers, fibre count, environment, and the certification the client's expecting all chang...
27/08/2026

Different jobs need different splicers, fibre count, environment, and the certification the client's expecting all change which unit actually makes sense. We hold a range of fusion splicers in our fleet, each checked and function tested before it goes out, so the unit matched to your job is the one that turns up, not whatever's free that week. Talk to the hire team about what your next job needs ☎️ 01234 848030.

Cable left exposed for even a short run is one impact or crush away from a repair job nobody planned for. CMW stocks rig...
27/08/2026

Cable left exposed for even a short run is one impact or crush away from a repair job nobody planned for. CMW stocks rigid conduit from standard PVC through to galvanised steel, so the level of protection is suited to the environment your cables are installed in. Source rigid conduit in the size and material your job needs ☎️ 01234 848030.

Ordering a cabinet from one place, copper patch leads from another, and containment from a third supplier turns one job ...
26/08/2026

Ordering a cabinet from one place, copper patch leads from another, and containment from a third supplier turns one job into three deliveries to check off before your actually ready to start. CMW covers the cabinet, copper patch leads, containment, cable ties and fixings, and the test kit to certify it all, one supplier, one delivery. Source what your next job needs in one order ☎️ 01234 848030.

Every splice starts the same way, power on, and the display tells you straight away if it's actually ready to work. Ever...
26/08/2026

Every splice starts the same way, power on, and the display tells you straight away if it's actually ready to work. Every Fujikura 70S+ we hire out is pre-stripped, cleaned, electrode tested and fully function checked before every hire, so a "READY" screen means exactly that, not just powered on. Check splicer availability with the CMW hire team ☎️ 01234 848030.

Address

5 & 6 Arkwright Industrial Estate, Arkwright Road
Bedford
MK420LQ

Opening Hours

Monday 8:30am - 5:15pm
Tuesday 8:30am - 5:15pm
Wednesday 8:30am - 5:15pm
Thursday 8:30am - 5:15pm
Friday 8:30am - 5:15pm

Telephone

01234848030

Website

Alerts

Be the first to know and let us send you an email when Cable Management Warehouse Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category