R.K Computer Center Pvt.ltd

11/11/2025

Ever failed means never tried

29/12/2017

You made the year 2017 so wonderful for me. You made me smile, laugh, cry out the tears of joy! I realised I wasn't this happy ever. I cannot thank you enough for bringing so much cheer into my life. Let's make the new year 2018 even happier. Wish you a very happy new year, IN ADVANCED from
*******(RK COMPUTER CENTRE)**********
TO YOU ALL IN NEW AND GREAT UPCOMING YEAR********************

15/10/2016

To create a bootable USB flash drive

Insert a USB flash drive into a running computer.

Open a Command Prompt window as an administrator.
Type diskpart.

In the new command line window that opens, to determine the USB

flash drive number or drive letter, at the command prompt,

type list disk, and then click ENTER.
The list disk command displays all the disks on the computer
Note the drive number or drive letter of the USB flash drive.

At the command prompt, type select disk , where X is the drive number or drive letter of the USB flash drive, and then click ENTER.

Type clean, and the click ENTER. This command deletes all data from the USB flash drive.

To create a new primary partition on the USB flash drive, type create part pri, and then click ENTER.

To select the partition that you just created, type select part 1, and then click ENTER.

To format the partition, type format fs=ntfs quick, and then click ENTER.

System_CAPS_ICON_important.jpg Important
If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
Type active, and then click ENTER.
Type exit, and then click ENTER.
When you finish preparing your custom image, save it to the root of the USB flash drive

15/10/2016

25/09/2016

C program

06/06/2016

How can we partition hard disk with out format our laptop and desktop?
step :-
1. open control panel
2. Than click on administration tool
3. click component service
4. Open storage
5. Now select required drive which you want to partition
6. right click on drive
7. than click on shrink volume
8. now select required volume
9. click on OK than your drive is partition and ready to use

01/11/2014

Windows Instructions

1

Run Microsoft Update to make sure that your copy of Microsoft Word is up to date.
2

Download and install the correct Microsoft Compatibility Pack for your version of Microsoft Word (see Resources).

Sponsored Links
gateway ip

The easiest way to access private IP devices. Try it NOW!
www.moxa.com
3

Double-click your .docx file to open it. Microsoft Word will automatically translate the file.
4

Go to the "File" menu and select "Save As..."
5

Change the "Save as type:" field to "Word Document (*.doc)" and click "Save."

Macintosh Instructions

6

Go to the "Help" menu and select "Check for Updates." Download and install the latest Microsoft Word updates.
7

Download and install the current Open XML File Format Converter for Macintosh (see Resources).
8

Double click the .docx file to open it.
9

Click "Convert" when the window pops up asking if you want to convert the document.
10

Go to the "File" menu and select "Save As..." Change the "Format:" pop-up menu to "Word Document." Click "Save."

Sponsored Links


Read more : http://www.ehow.com/how_5070632_convert-docx-file-doc.html

01/11/2014

steps
1

Shut down the laptop, and close the LCD panel. Unplug the power cable, and disconnect all external devices. Place the laptop face down, with the front edge facing forward. Slide the battery release button downward, and remove the battery from its compartment in the upper-right corner of the laptop.
2

Loosen the two Phillips-head screws fastening the hard drive to the upper left corner of the laptop. Pull the hard drive from its compartment, and set it aside. Remove all Phillips-head screws from the laptop's base enclosure. Flip the laptop over, and open the display panel all the way.

Sponsored Links
Download Mt 4

We Test Robots On Our Accounts & We Share The Results With You = Free!
forexpeacearmy.com/_Mt_4
3

Loosen and remove all Phillips-head screws from the laptop's rear panel. Rotate the laptop so the front of the screen is facing you. Remove the keyboard cover, which is the plastic piece above the keyboard assembly. Loosen the single Phillips-head screw fastening the exposed speaker assembly to the laptop. Unplug the speaker cable from the motherboard. Remove the speaker assembly from the laptop.
4

Remove the Phillips-head screws fastening the keyboard to the laptop. Lift the keyboard out of the laptop, and unplug the ribbon cable from the motherboard. Remove the keyboard from the laptop. Unplug the LCD video cable from its connector in the upper left corner of the motherboard. Remove the Phillips-head screws from each display hinge. Remove the display panel from the laptop.
5

Loosen and remove all Phillips-head screws securing the top cover to the laptop. This is the main plastic piece concealing the top side of the motherboard. Lift the top cover off of the laptop's base, and unplug the touchpad's ribbon cable from the motherboard. Remove the top cover from the laptop.
6

Locate the heat sink device in the upper-left or right corners of the motherboard. This is the metal device with copper pipes coming out of it that also sits directly on top of the processor. Remove the spring-loaded screws fastening the heat sink to the motherboard. Remove the heat sink from the laptop. Turn the processor's flat-head locking screw in the counterclockwise direction. Remove the processor from its socket, and set it aside.
7

Unplug all cables from the motherboard, and remove any remaining devices attached or fastened to the motherboard. Remove the remaining Phillips-head screws fastening the motherboard to the laptop's base enclosure. Lift the motherboard out of the laptop, and set it aside.
8

Repeat this procedure in reverse to install the replacement motherboard.

Sponsored Links


Read more : http://www.ehow.com/how_7671682_repair-hp-motherboard.html

01/11/2014

How to Repair an HP Motherboard
By Ezekiel James, eHow Contributor

Share
Pin
Tweet
Stumble
Share

How to Repair an HP Motherboard thumbnail Repairing your HP laptop's motherboard involves replacing it with a working motherboard.

Motherboard repair is a tricky procedure. Motherboard diagnosis is time-intensive, and often the diagnosis equipment is too costly for the average computer user. In fact, many laptop repair technicians will advise you to replace the entire motherboard. Fortunately, you can perform this procedure yourself without much electronics experience. Replacing your HP laptop's motherboard is a matter of dismantling the computer and removing all components that attach to the motherboard. However, doing so will void your computer's warranty.


Read more : http://www.ehow.com/how_7671682_repair-hp-motherboard.html

Motherboard repair is a tricky procedure. Motherboard diagnosis is time-intensive, and often the diagnosis equipment is too costly for the average computer user. In fact, many laptop repair technicians will advise you to replace the entire motherboard. Fortunately, you can perform this procedure you…