Modular Power Systems

Modular Power Systems Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Modular Power Systems, Electronics, Georgetown.

48v 5 kw/h battery back-up, 3000w power system Enclosed rack $892,050Open rack $863,097Battery bank only 48v,enclosed: $...
03/06/2022

48v 5 kw/h battery back-up, 3000w power system
Enclosed rack $892,050
Open rack $863,097
Battery bank only 48v,
enclosed: $652,050
Open: $590,500

Design to be as small and efficient as possible it can be mounted on a wall, floor or even ceiling to conserve space. The Enclosed racks provides extra protection if there's ever a faulty battery and adds to the aesthetic of the system. This system can run most smaller homes for about 5 hrs, while limiting energy use can power most appliances for 8hrs, and run at max power of 3000w for 1.5hrs.. This system can be wired into your switchgear or load center or plug into using one of the outlets. Can be charged using grid power, Solar, or generator.
Need higher capacity and power output connect upto 4 back up systems in parallel for upto 20kw/h capacity and 12kw power output or just add separate 5kw battery bank for higher capacity upto 10kw.

Lycan 5000 5kw/h battery back up system, The Renogy LYCAN 5000 Power Station is an all-in-one energy storage system spe...
03/06/2022

Lycan 5000 5kw/h battery back up system,
The Renogy LYCAN 5000 Power Station is an all-in-one energy storage system specially designed to supply power during emergencies, power outages, or to provide power for off-grid homes. With a 4.8kWh capacity and a 3500W pure sine wave AC output, the LYCAN can deliver reliable power to most home appliances. It has a 4400W solar input capability and an intelligent maximum power point tracking (MPPT) algorithm, allowing maximized solar energy generation at any time of the day and full charge in as short as 2.5 hours. Fast AC charging, means that the LYCAN fully charges with AC power from a wall outlet or a generator in as short as 3 hours. Simultaneously connecting the LYCAN to both solar panels and AC outlets can further shorten the charging time to 1 hour from 0% to 80%. The pass-through function allows the LYCAN to bypass AC power to run home appliances while keeping its batteries topped off. Thanks to the pre-wired design and plug-n-play connectors, the LYCAN can be easily integrated into existing electric power systems, greatly reducing installation time and labor cost. The built-in circuit breakers protect the LYCAN from damage caused by unexpected system faults. Equipped with a Bluetooth module, the LYCAN provides access to real-time monitoring on the Renogy DC Home app. It can also be easily expanded to up to 19.2KWh with Renogy 48V 50Ah Smart Lithium Iron Phosphate Batteries, covering any applications from short term blackout protection to long term off-grid living. The LYCAN features a rain cap, rubber seals, and rugged enclosure, protecting against harsh outdoor environments. Built with easily-replaceable components, the LYCAN makes simple repair and maintenance possible.
【24/7 Uninterruptible Power Supply】 Connect your LYCAN to the building's main switchboard for 24/7 Uninterruptible Power Supply in order to keep your family away from power outages.


【Fast Charging】 The LYCAN can be fully charged in 1.3 hours when connecting to both solar panels and AC outlets simultaneously.


【Powerful Output】 The 4.8kWh LYCAN with rated output 120V can easily power most heavy-duty home and outdoor appliances with a continuous power output of 3500W and peak power of up to 7000W.


【Seamless Expansion】 LYCAN can be easily expanded to up to 19.2kWh, covering most home applications from short-term blackouts to power independence.


【Built-In Protection】 Advanced pure sine wave technology provides quality AC equivalent to grid power which will protect your electronics and appliances. Built-in multiple safety protection devices to ensure safe operation.

With Our fully Modular Systems, you can increase capacity and output of your system as your power usage increase with ou...
01/06/2022

With Our fully Modular Systems, you can increase capacity and output of your system as your power usage increase with out changing the system. We prefer to use lithium batteries for its compact size and high efficiency compared to other types batteries (we can also build systems using lead acid, agm, or gel), and best inverters. Our systems start from 2-5kwh and can gradually increase to 15-30kwh storage capacity depending on your application and initial budget, and 2.5kw to 16kw output. These systems can be hardwired into your current switchgear using available connections or plug in extension using available outlets. Systems can be charged using grid power or plug in a few Solar panels for highest efficiency and lower energy cost. Systems can be built in an open or enclosed rack for a professional look and safety.
For larger systems please contact us as equipment to power them are different.

29/05/2022

Welcome to Modular Power Systems.
WHO ARE WE? :We are a Stand-by System and Energy Conservation Consulting Company, We Provide Our Clients with the Best Knowledge in Energy Conservation and Back-up/Stand‐by Systems.
WHAT WE DO? : In today’s always-on business environment, we understand there is no time for downtime. Completing your project on-time and on-budget is of paramount importance. With our experience in Solar Systems we use our knowledge to design a BATTERY BASED MAINTENANCE free BACK-UP system MOVING away from mechanical based systems that REQUIRES MAINTENANCE and cause NOISE and AIR POLLUTION. Our systems provide instant switch overs in the event of a power loss, with no noticeable power interruptions in the most efficient manner, we also design power saving catalog catered to specific locations and needs.
HOW WE DO IT? : By taking a global approach to your location, we incorporate all of your mechanical( air conditions, fans, and pumps), electrical (lights, computers, printers, and televisions), and life and safety systems, (sprinklers/fire safety, carbon monoxide, and fresh air ventilation)into one and assess the entire system as a whole for losses due to inefficiencies. By installing data-loggers through out your location we check for temperature differences, power usage during different times of the day and different areas of the location, we then compare the data we receive from the data loggers along with visual inspections to create an Energy Saving Plan. During this assessment we log your energy usage to build a back-up system based on your energy needs.

DISCLAIMER:
WE ARE NOT AN ELECTRICAL INSTALLATION/REPAIR COMPANY OR EQUIPMENT MANUFACTURER, WE DESIGN SYSTEMS BASED ON AVAILABLE MATERIALS AND PARTS WHILE WORKING ALONG WITH SOME OF THE BEST REGISTERED ELECTRICIANS AROUND FOR INSTALLATIONS.

Address

Georgetown

Website

Alerts

Be the first to know and let us send you an email when Modular Power Systems posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category