KNOCK

KNOCK KNOCK provides a complete range of services related to IT, Computer AMC, Computer Peripherals, Networking, Configuring of Server, CCTV

KNOCK provides a complete range of services related to IT, Computer AMC, Computer Peripherals, Networking, Configuring of Server, CCTV. We are the complete IT solution company located in Bangalore(India), offering a complete maintain and manage your Computer AMC, Computer Peripherals, Network and also Server. KNOCK came into existence with the sole aim of providing accurate, prompt and exclusive I

T services in India. We have a highly trained and qualified service engineers placed all across Bangalore. They are easily & quickly available to help you with your desktop Managements, laptops Managements, Servers management or Network Management. In addition to the trouble shooting and call handling, we will strive for excellence in services, which translate in minimal down time and enhanced productivity, in general, services will be as follows. We understand that your company needs a partner who is not nearly a box pusher but understands two things. The latest technology launches & new product and software’s How to deploy these new technologies products and software’s at your site, so that it results in savings of time, money, manpower & space etc. and we promise to provide you these services free of cost for one whole year.

http://knock.co.in/A new fresh look to KNOCK website
08/05/2015

http://knock.co.in/

A new fresh look to KNOCK website

KNOCK provides a complete range of services related to IT, Computer AMC, Computer Peripherals, Networking, Configuring of Server, CCTV. We are the complete IT solution company located in Bangalore(India), offering a complete maintain and manage your Computer AMC, Computer Peripherals, Network and al…

05/03/2015

Check out the Steps to Delete VIRUS which are in USB drive from command prompt without antivirus.

Type the following commands in the Command Prompt

Type “:” in the command prompt and hit “Enter“. (“Drive_name” is where the problem occurs, it may be any USB drive)

Type “attrib” and hit “Enter“. (This shows the files that are present in the currently working directory. You can also use the command “dir/w/o/a/p“)

If there are any file named autorun.inf then go for next steps else the drive is not affected with any autorun.inf file.

Type “attrib -h -r -s -a *.* ” then hit “Enter“. (This command removes the Hidden, Read Only, System and Archive attributes over any file)

After unhiding and removing attributes you can see the files. So you can delete the file now.

Type “del ” in the Command Prompt and hit “Enter“. (As for example del autorun.inf)

31/12/2014

May the New Year fill up days
with all things that are nice
and bright – here is
wishing you a lovely 2015.

Tricks to Speed-up your Pendrive Data Transfer Rate.As i Said, When You buy a New Pendrive it works Fast but as it gets ...
10/12/2014

Tricks to Speed-up your Pendrive Data Transfer Rate.

As i Said, When You buy a New Pendrive it works Fast but as it gets older, The Data Transfer Rate Starts Decreasing.

Data Transfer Rate Depends on Types of Files You are Transferring. Songs, Docs, Videos May get Transferred very Quickly.

Data Transfer Rate also depends on Locations of Files. If you want to transfer a bunch of files to Same Drive But another Folder then it will get Transferred very Fast. But if You want to Transfer Files from one Drive to another then it will Take some Time Comparatively. Likewise in Pendrive.

USB Port Version 2.0 is Most popular and the computers which are manufactured after year 2000 Have 2.0 Usb port Version. This version of USB port gives you the Speed of 35mbps (Theoretically)
We will Change The File System To NTFS of your pendrive and Also We will Change the Device Policy in order To Speed-up your Pendrive. Follow Below Steps

1: Plugin your Pendrive, Right click on your pendrive and select Format (You will Lose All your data in your pendrive so better Take a backup) Then, Select NTFS File system, Uncheck Quick Format and Click on Start.



Note: We Are Changing The File system to NTFS Because FAT 32 Cannot Handle Large amount of data

2: After Formatting Your Pendrive and Converting it To NTFS file System, It’s now Time to Change the Device Policy.

Now Again Go to Your Pendrive Properties , click on Hardware Tab. Select Your Usb Device from the list and click on Properties .



After Clicking on Properties You will see a new Dialog Box, Click on Change Settings, Another Dialog Box will appear, Click on Policy Tab and Select Better Performance, Click ok .
That’s it. I will recommend to Restart Your Computer



Note : Understand That After Changing the Device Policy , Your Data Transfer Speed Will Increase But Make Sure You Click on ” Safely Remove Hardware and Eject Media” Before Removing Your Pen drive.
Bonus tip: I will also recommend you to Check your Pen drive for errors. Errors in Your Pendrive May even Cause To Slow Down your Pendrive Data Transfer Speed. You Can Do It by Navigating to Pen drive Properties > Tool > Check.

http://www.wikihow.com/Install-Windows-7-for-Beginners
24/09/2014

http://www.wikihow.com/Install-Windows-7-for-Beginners

This article is to demonstrate the basic steps for installing Windows 7 and is aimed at beginners and above. You should check the disk does not contain valuable data before formatting or installing. Recommend to backup any data if of...

Speed up your system with simple steps
08/09/2014

Speed up your system with simple steps

Windows PCs typically slow down as applications are installed and used. Whether you are using a word processor, writing a spreadsheet, surfing the internet, playing games or anything else, hard drives fill with temporary files that do not...

03/09/2014

How To Lock A Folder Using Notepad

1. Start--> Run --> Notepad and hit enter.
2. Now Copy below code and paste it in notepad

cls
OFF
title Folder Locker
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST Locker goto MDLOCKER
:CONFIRM
echo Are you sure u want to Lock the folder(Y/N)
set/p "cho=>"
if %cho%==Y goto LOCK
if %cho%==y goto LOCK
if %cho%==n goto END
if %cho%==N goto END
echo Invalid choice.
goto CONFIRM
:LOCK
ren Locker "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
echo Folder locked
goto End
:UNLOCK
echo Enter password to Unlock folder
set/p "pass=>"
if NOT %pass%==type your password here goto FAIL
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}"
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" Locker
echo Folder Unlocked successfully
goto End
:FAIL
echo Invalid password
goto end
:MDLOCKER
md Locker
echo Locker created successfully
goto End
:End

Now Save Notepad as FolderLock.bat.

3. Now double click on FolderLock.bat file then a new folder named as Locker is created.
4. Save your files in Locker folder then again double click on the FolderLock.bat, a prompt is displayed.
5. To lock the folder(Locker) press "y " in the prompt, to unlock press "n" in the prompt.

Address

Bangalore

Website

Alerts

Be the first to know and let us send you an email when KNOCK posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to KNOCK:

Shortcuts

Share

Category