KS Embedded Innovations

15/03/2021

https://youtu.be/SiV47g_php4

Solar home UPS system. New concept in using Solar power in homes.

An innovative concept of using Solar power for homes. Instead of high cost of elaborate wiring and installing separate units, this concept reduces both cost ...

19/08/2019

Supplier robot. This is a model of hotel supplier. Its a modified Line Follower with a servo controlled arm. It takes the order from the table and follows a pre defined path to kitchen to get the food item and returns to the customer table for delivery. Atmega8515 controller is used in thin robot. 4 touch plates are used to select 4 items by the customer and the servo controlled arm is used to deliver the item.
Working video
https://www.youtube.com/watch?v=kdlUw3iyVjY

19/08/2019

Tablet dispenser. This unit supplies different tablets to separate patients in regular interval. Also it has an alarm for alerting the patient to take the medication and a dump facility for unused tablets with a reminder for caretaker through SMS. Atmega8 controller is the brain of the unit. The tablet channels are changeable between 2 patients.
Working video
https://youtu.be/m876iUECFXk

19/08/2019

Tesla coil. Proposed and developed by legendary inventor Nikola Tesla, a simple model shows the wireless power transfer over a small distance. A CFL tube or florescent tube can be used to show the power transfer.

19/08/2019

Solar home UPS. This model demonstrates a new design in solar powered homes or buildings. For simplicity here DC is used instead of AC. Regular solar models need extra wiring and special lights, fan etc. But this model uses same wiring and regular appliances. The solar panels are used to charge the battery normally used for UPS backup along with a changeover switch having daylight sensor, and after sunset, the charging is done through normal mains.

19/08/2019

Maze solver robot. This is an automated robot capable of solving any obstacle course with its 3 IR pair sensors mounted on front, left and right sides. At89C51 is the brain of the robot. L293D is used for motor control.

19/08/2019

Gesture controlled robot. This model uses human hand movements with the help of an Accelerometer and sends it to the robot, which in turn acts upon the directions from the hand. The wireless communication is handled by a Zigbee X2 module. The robot has chain wheel mechanism for ground movements and a servo gripper arm for handling small objects. Atmega8 controller is the brain of the robot.

19/08/2019

Heart beat monitor with android app. This model reads the heart beat of a patient using a INVNT_11 Pulse Rate Sensor through an Arduino and a custom made Android App, which requests the current reading to display on the app screen. Also the result is displayed on a 16x2 LCD screen.

19/08/2019

Dam gate control model. Water level sensors measure the water level of the dam. And crest gate will respond according to the water level. High water level results in full gate open and low water level means gate closure. Crest gate is controlled through a servo motor. ATtiny2313 is the controller. And a 16x2 LCD displays the actions.

19/08/2019

Green house monitor. This model can be used to control a nursery for plant saplings. This model reads the soil moisture level to control the water pump. Also it reads the surrounding temperature using DHT11 sensor to control cooling or heating the area. 60W bulb is used as a heater and CPU fan is used as a cooler in this model. All the action is displayed on a 16x2 LCD panel. The controller is ATmega8515.

07/09/2018

My new initiative. Please support.

02/05/2018

Quadruped robot

A quadruped robot built using 12 servo motors, 3 motors in 4 legs. The body is made using handcut 4mm acrylic sheet. Also it has a geared DC motor for drilli...