GS AUDIO Italy

18/06/2026

𝗔𝗹𝗰𝘂𝗻𝗶 𝘀𝗰𝗮𝘁𝘁𝗶 𝗱𝗮𝗹 𝗿𝗮𝗱𝘂𝗻𝗼 𝗱𝗶 𝘀𝗮𝗯𝗮𝘁𝗼 𝟭𝟯 𝗴𝗶𝘂𝗴𝗻𝗼 a Finale Emilia presso il ristorante @‌smile.finaleemilia ! 𝗪𝗵𝗮𝘁 𝗮 𝗻𝗶𝗴𝗵𝘁! 📸🇮🇹

Grazie a tutti quelli che hanno partecipato e complimenti alle auto del team GS Audio, come sempre al top. 💪

Foto credit: giulighi00

10/06/2026

𝗩𝗢𝗖𝗘 𝟴𝗡𝟲𝟮 𝗠𝗞𝟮 𝗖𝘂𝘀𝘁𝗼𝗺 𝗩𝗲𝗿𝘀𝗶𝗼𝗻 for 🇬🇷
A custom version of our 4 Ohm VOCE 8N62 MK2 woofer, built with a black basket on request of our Greek dealer Theo Sound.

For us, Made in Italy is not just a label. It is a way of working.
It means following each product with attention, respecting precise standards and bringing the quality of expert handmade craftsmanship into car audio.

➡️Swipe through the carousel to see some of the woofer assembly steps.

The VOCE 8N62 MK2 is designed to deliver professional performance in high-level SQ systems and active setups.
𝗠𝗮𝗶𝗻 𝗙𝗲𝗮𝘁𝘂𝗿𝗲𝘀:
🔹8” / 200 mm
🔹450 WRMS / 900 W MAX
🔹4 Ohm impedance
🔹Frequency response: 80 Hz - 7 kHz
🔹Sensitivity: 100.03 dB @ 2.83 V
🔹62 mm CCAW voice coil
🔹Neodymium magnet
🔹Lightweight design and high efficiency
🔹Fast, dynamic and defined midrange response

This custom black basket version shows how GS Audio can adapt selected aesthetic details while keeping performance, reliability and build standards unchanged.

𝗠𝗮𝗱𝗲 𝗶𝗻 𝗜𝘁𝗮𝗹𝘆.
𝗛𝗮𝗻𝗱𝗺𝗮𝗱𝗲 𝗯𝘆 𝗚𝗦 𝗔𝘂𝗱𝗶𝗼.

04/06/2026

Are you ready for a 𝗡𝗘𝗪 𝗦𝗘𝗥𝗜𝗘𝗦 of amplifiers? VULTUR is coming.

Full-range design, integrated RGB LED lighting, remote control with digital voltmeter, and multiple models available to drive speakers and subwoofers in SPL systems, demo cars, and more.

This series was born as an aesthetic evolution of our beloved Crystal amplifiers, but with more power available per channel and technical solutions designed for higher-performance installations.

𝗣𝗿𝗲𝘃𝗶𝗲𝘄:
✅ High-efficiency Class D
✅ RGB LED lighting effects
✅ Remote control included with digital voltmeter
✅ Integrated HPF / LPF filters
✅ Reinforced RCA connectors with locking ring
✅ Signal-to-noise ratio >90 dB
✅ 1 model also available in 24 V version

Pre-orders will open soon on www.gsaudio.it

During the pre-order phase, you will be able to purchase them at a discounted price until they arrive in stock.

𝗩𝗨𝗟𝗧𝗨𝗥 𝗦𝗘𝗥𝗜𝗘𝗦
Coming soon.

27/05/2026

Migliora l’audio nella tua auto con 𝗚𝗦 𝗔𝗨𝗗𝗜𝗢 𝗞𝗜𝗧 𝗦𝗣𝗘𝗔𝗞𝗘𝗥 𝟯 𝗩𝗜𝗘 – 𝟲.𝟱” / 𝟭𝟲𝟱 𝗺𝗺
120 WRMS • 4 Ohm • Woofer + Midrange + Tweeter + Crossover

Il nuovo kit 3 vie GS Audio è progettato per upgrade OEM, front stage SQ e impianti daily use orientati alla qualità sonora.

𝗖𝗼𝗺𝗽𝗼𝗻𝗲𝗻𝘁𝗶 𝗱𝗲𝗹 𝗸𝗶𝘁:
👉🏻Woofer 165 mm con cono in carbonio e fibra di vetro, cestello in alluminio pressofuso, sospensione in gomma impermeabile e bobina da 32 mm.
👉🏻 Midrange 87 mm con cono in fibra e magnete neodimio.
👉🏻 Tweeter 27 mm a cupola in seta con supporto in alluminio e magnete al neodimio, per alte frequenze morbide.
👉🏻Crossover passivi inclusi con componenti a vista, connessioni a vite e gestione dedicata di woofer, medio e tweeter.

𝗜𝗱𝗲𝗮𝗹𝗲 𝗽𝗲𝗿:
✅ Upgrade impianti OEM
✅ Front stage 3 vie
✅ Daily use orientato alla qualità
✅ Sistemi con o senza DSP
✅ Installazioni in porta o ambienti umidi

Risposta in frequenza: 45 Hz – 21.000 Hz
Sensibilità: circa 92 dB
Potenza consigliata: fino a 200 WRMS per canale
Compatibile con autoradio originali (18–25 WRMS)

Per ottenere le migliori prestazioni consigliamo l’utilizzo con amplificatore esterno e porte insonorizzate.

🌐 Disponibile ora su http://www.gsaudio.it
Spedizione in tutto il mondo.

24/05/2026

22/05/2026

Avete già visto i nostri nuovi kit da installare in predisposizione? 🔊
Tutti disponibili sul nostro sito web https://www.gsaudio.it/it/kit-altoparlanti-componenti-2-vie-6-5-80-wrms-4-ohm-midwoofer-tweeter.html

21/05/2026

Your installations make the difference 🔥
Scroll through the carousel and check out some of the builds made by Audio55 customers: SQ, SPL, daily setups and fully custom installs.

Do you recognize your car in one of the photos? 👀
Show yourself in the comments… we’ll tag you! 🔊

14/05/2026

𝗧𝗲𝘀𝘁𝗶𝗻𝗴 𝘀𝗲𝘀𝘀𝗶𝗼𝗻 𝗶𝗻 𝗼𝘂𝗿 𝗹𝗮𝗯

PRO DIVISION woofers under low-frequency stress test (approximately 45-50 Hz) to monitor excursion, suspension behavior and cone control under load.

Designed for 𝘱𝘳𝘰𝘧𝘦𝘴𝘴𝘪𝘰𝘯𝘢𝘭 𝘢𝘶𝘥𝘪𝘰 𝘢𝘱𝘱𝘭𝘪𝘤𝘢𝘵𝘪𝘰𝘯𝘴 requiring high output and controlled low-mid response.

This is one of the first tests on this product.
The test bench is still a basic setup, but it allows us to evaluate the first mechanical and acoustic behavior of the woofer under load.

𝑫𝒊𝒔𝒄𝒐𝒗𝒆𝒓 𝒕𝒉𝒆 𝒇𝒖𝒍𝒍 𝒓𝒂𝒏𝒈𝒆 𝒐𝒏 𝒘𝒘𝒘.𝒈𝒔𝒂𝒖𝒅𝒊𝒐.𝒊𝒕

29/04/2026

Assemblaggio interno GS Audio dei subwoofer GOLD, una delle nostre serie bestseller progettata per applicazioni SPL ad alta potenza.

👉🏻𝟱𝟬𝟬𝟬 𝗪𝗥𝗠𝗦 / 𝟭𝟬𝟬𝟬𝟬 𝗪 𝗠𝗔𝗫
👉🏻Cono 𝗖𝗮𝗿𝗯𝗼𝗻 𝗞𝗲𝘃𝗹𝗮𝗿 𝘀𝗮𝗻𝗱𝘄𝗶𝗰𝗵
👉🏻Bobina 𝟴 𝘀𝘁𝗿𝗮𝘁𝗶 𝗖𝗖𝗔𝗪 su supporto in alluminio
👉🏻Doppio magnete ferrite Ø𝟮𝟱𝟱 𝗺𝗺 𝗰𝗼𝗻 𝗽𝗶𝗮𝘀𝘁𝗿𝗲 𝗨𝗙𝗢
👉🏻Spider rinforzati con 𝗿𝗲𝘁𝗲 𝗶𝗻 𝗞𝗲𝘃𝗹𝗮𝗿
👉🏻Parapolvere in carbonio (miglior dissipazione del calore + maggiore rigidità)

Produzione 𝗮𝗿𝘁𝗶𝗴𝗶𝗮𝗻𝗮𝗹𝗲 𝗠𝗮𝗱𝗲 𝗶𝗻 𝗜𝘁𝗮𝗹𝘆, con possibilità di personalizzazione. Tra i modelli disponibili: 12” (30 cm) – 15” (38 cm) – 18” (46 cm) – 21” (54 cm)

Questo subwoofer è pensato per applicazioni estreme SPL/bassone. Lo consigliamo in abbinamento con amplificatori tra 𝟯𝟱𝟬𝟬 𝗲 𝟴𝟱𝟬𝟬 𝗪𝗿𝗺𝘀.

🌐 Spedizione in tutto il mondo
💻www.gsaudio.it

24/04/2026

𝗕ä𝗰𝗸𝗺𝗮𝗻𝘀 𝗚𝗮𝗿𝗮𝗴𝗲 - 𝗖𝘂𝘀𝘁𝗼𝗺𝗲𝗿 𝗕𝘂𝗶𝗹𝗱 A Volvo 940 taking shape… and promising serious numbers 🔊

Front stage with 𝗚𝗦 𝗔𝘂𝗱𝗶𝗼 𝗽𝗿𝗼𝗱𝘂𝗰𝘁𝘀: 𝟲𝘅 𝗩𝗢𝗖𝗘 𝟴”/𝟮𝟬𝟬𝗺𝗺 woofers with ferrite magnet, 400 WRMS, installed in the doors + 𝟰𝘅 𝟮𝟲 𝗡𝗘𝗢 𝘁𝘄𝗲𝗲𝘁𝗲𝗿𝘀 for a full, high-impact output.

The trunk fully treated with our 𝗱𝘂𝗮𝗹-𝗹𝗮𝘆𝗲𝗿 𝘀𝗼𝘂𝗻𝗱 𝗱𝗲𝗮𝗱𝗲𝗻𝗶𝗻𝗴: butyl + aluminum, applied in multiple layers to improve rigidity and control.

Completing the setup:
bass reflex enclosure with 𝟮 𝗦𝗶𝗹𝘃𝗲𝗿 𝟭𝟱”/𝟯𝟴𝟬𝗺𝗺 𝘀𝘂𝗯𝘄𝗼𝗼𝗳𝗲𝗿𝘀, ready to push hard - 3250 WRMS

Amplification handled by Audio 55 AB products

👀 More updates coming soon