Ambiens

Ambiens Ambiens builds 3D software, immersive experiences, and reality capture pipelines. SURFACE / SYSTEM / SCAN. Digital matter, made usable.

03/11/2026

Un po' di R&D: in cammino con una camera 360 e, mentre il video scorre, la strada che si ricostruisce in 3D.

Il motore divide ogni panorama in quattro viste, capisce da dove è stato ripreso ogni fotogramma e tiene il passo del video: 289 fotogrammi in circa 145 secondi, più o meno il tempo che serve per guardarli. Alla fine restano 110.211 punti e una mesh da 3,7 milioni di triangoli.

È un motore di fotogrammetria scritto da noi, uno degli esperimenti che per anni abbiamo lasciato nel cassetto perché troppo oneroso. Con l'AI siamo riusciti a riprenderlo in mano.

A bit of R&D: a walk with a 360 camera, and the street rebuilds itself in 3D while the video plays.

The engine splits each panorama into four views, works out where every frame was taken and keeps pace with the footage: 289 frames in about 145 seconds, roughly the time it takes to watch them. At the end: 110,211 points and a mesh of 3.7 million triangles.

It's a photogrammetry engine we wrote ourselves, one of the experiments we shelved for years because it cost too much to build. AI is what finally let us pick it back up.

30/10/2026

A coral reef in the Red Sea, rebuilt from 29 photos.

On top, the photos. Below, the model forming as our engine works out where each one was taken: first the camera positions, then the points, then the surface.

It’s the photogrammetry engine we’re building at Ambiens, written in Rust. Not a product yet: for now we test it on public datasets like this one.

On the same Mac, our engine aligns these 29 photos in 6 seconds. COLMAP, the academic standard, takes 23.

Una barriera corallina nel Mar Rosso, ricostruita da 29 foto.

Sopra le foto, sotto il modello che prende forma mentre il nostro motore capisce da dove è stata scattata ognuna: prima le posizioni, poi i punti, poi la superficie.

È il motore di fotogrammetria che stiamo costruendo in Ambiens, scritto in Rust. Non è ancora un prodotto: per ora lo mettiamo alla prova su dataset pubblici come questo.

Sullo stesso Mac il nostro motore allinea queste 29 foto in 6 secondi. COLMAP, lo standard accademico, ne impiega 23.

15/10/2026

Quest'uovo a fette un po' à la Dune non è mai stato sul tavolo. Però è in scala.

Input: un video girato col telefono.
Replica risolve una posa della camera per ogni frame, non una curva interpolata fra pochi keyframe.

Una scale bar stampata in 3D, tre tag: la scansione esce in scala, con origine, piano di terra e asse +X già al loro posto (beta, Pro)

Export USD per VFX, Z-up nativo: nessuna rotazione da sistemare in Blender. import_in_blender.py m***a la plate a piena risoluzione, la timeline e uno shadow catcher sulla mesh scansionata. Un HDRI a 360° della stanza mette a posto luce e riflessi.

Scale bar generator, gratis e per tutti: link in bio, sbizzarrirvi.

Walkthrough completo su YouTube, link in bio too.

This sliced, slightly Dune-ish egg was never on the table. But it's to scale.

Input: one phone video.
Replica solves a camera pose for every frame, not a curve interpolated between a few keyframes.

One 3D-printed scale bar, three tags: the scan comes out to scale, with origin, ground plane and +X already set (beta, Pro).

USD for VFX export, native Z-up, so there's no rotation to fix in Blender. import_in_blender.py sets up the full-res plate, the timeline and a shadow catcher on the scanned mesh. A 360° HDRI of the room handles light and reflections.

Scale bar generator, free for everyone: link in bio, go wild.

Full walkthrough on YouTube, link in bio too.

02/10/2026

A point has no shape. Give it a scale and a rotation, and it becomes a Gaussian.

That's where Gaussian splatting starts. Thirty seconds on what's actually inside one of those blobs (a center, three axes, an opacity, and a color that changes depending on where you're standing) and how you get there from a pile of photos.

62 floats per Gaussian in the original PLY. A few million Gaussians for a room. The math adds up fast, which is why the format became a compression problem before it was ever a rendering one.

A NeRF queries a neural network for every pixel. This one doesn't: project, sort, blend. Which is why it runs on a headset instead of a farm.

Not a render. A place to move around in.

Un punto non ha forma. Dagli una scala e una rotazione, e diventa una gaussiana.

Da lì parte il gaussian splatting. Trenta secondi su cosa c'è davvero dentro una di quelle macchie (un centro, tre assi, un'opacità, e un colore che cambia a seconda di dove ti metti) e come ci si arriva partendo da un mucchio di foto.

62 numeri in virgola mobile per gaussiana, nel PLY originale. Qualche milione di gaussiane per una stanza. Il conto si fa presto, ed è il motivo per cui il formato è diventato un problema di compressione prima ancora che di resa.

Un NeRF interroga una rete neurale per ogni pixel. Questo no: si proietta, si ordina, si compone. Ed è per questo che gira su un visore invece che su una farm.

Non un render. Uno spazio in cui muoversi.

Replica 1.4 è un tutta un'altra storia. Video in, scena 3D con camera tracking out.Importa un MOV o MP4: Replica selezio...
21/09/2026

Replica 1.4 è un tutta un'altra storia.
Video in, scena 3D con camera tracking out.

Importa un MOV o MP4: Replica seleziona i frame che contano, ricostruisce tutto e, con la nuova pipeline progressiva, lo fa con meno fame di memoria.

Una camera pose per ogni frame del video, export USD e via in Blender con modello, camere e footage undistorted già allineati.

In pratica: meno setup, più scena.

E c’è altro:

- export della point cloud a colori in binary PLY
- nuovo gizmo 3D per rotate / scale / translate
- processing status più leggibile
- ETA, finalmente

One-time purchase.
I dati del progetto restano sul tuo Mac. Sempre.

Link in bio.

Replica 1.4 is a game changer.
Video in. Tracked 3D scene out.

Import a MOV or MP4. Replica picks the frames that matter, reconstructs everything and now does it with a lighter, progressive pipeline.

With Pro, things get more interesting: solve a camera pose for every frame, export USD, then jump into Blender with model, cameras and undistorted footage already aligned.

Less setup. More scene.

Also new:

- colored point-cloud export in binary PLY
- new 3D gizmo for rotate / scale / translate
- clearer processing status
- ETA, finally

One-time purchase.
Your project data stays on your Mac. Always.

Link in bio.

La fotogrammetria è 70% ripresa, 30% software.Per il software c'è Replica, nulla da aggiungere… 😎Mentre quel 70% spesso ...
04/09/2026

La fotogrammetria è 70% ripresa, 30% software.
Per il software c'è Replica, nulla da aggiungere… 😎

Mentre quel 70% spesso se ne va in 5 errori che nessuno ti dice.

Li abbiamo messi in fila, con il fix da 30 secondi per ognuno:
01 · Motion blur → rallenta, la posa batte la fretta.
02 · Luce dura o che cambia → morbida e costante.
03 · Overlap troppo basso → 60-80%, gira tutto intorno.
04 · Superfici lucide o piatte → il solver non ha appigli.
05 · Aha! → il turntable con lo sfondo fermo: giri l'oggetto, ma il software si aggancia alla stanza. Risultato: soggetto spalmato.

Salvalo prima della prossima scansione.
E dicci quale ti ha fregato in passato? 👇

Photogrammetry is 70% capture, 30% software. The software? That's Replica - nothing to add... 😎

The other 70% is where 5 mistakes nobody warns you about quietly wreck your scan.

We lined them up with the 30-second fix for each:

01 · Motion blur → slow down; a steady pose beats a fast one.
02 · Harsh or shifting light → keep it soft and constant.
03 · Not enough overlap → 60–80%, orbit all the way around.
04 · Shiny or flat surfaces → the solver has nothing to grab.
05 · Aha! → the turntable with a still background: you spin the object, the software locks onto the room. Result — a smeared subject.

Save it before your next capture.
And tell us — which one got you? 👇

Replica - reality, scanned. On macOS. → replica3d.xyz

Giornata di rilievi sul campo.Drone in volo e camere puntate su dettagli, rocce, rovine e qualsiasi superficie interessa...
10/07/2026

Giornata di rilievi sul campo.

Drone in volo e camere puntate su dettagli, rocce, rovine e qualsiasi superficie interessante (gatto compreso, anche se non ha collaborato).

L'obiettivo è stato raccogliere dataset 3D di qualità per testare le prossime funzioni di Replica.

Surface Team. Interactive in the wild.

(per Replica link in bio; canale Discord aperto: vieni a nerdare con noi su fotogrammetria, Gaussian splatting e sulla passione dei gatti per l'archeologia)

A day of field surveys.

Drone in flight and cameras trained on details, rocks, ruins, and any interesting surface (including the cat, even if he didn't cooperate).

The goal was to collect quality 3D datasets to test Replica's upcoming features.

Surface Team. Interactive in the wild.

(Replica link in bio; Discord channel open: come nerdy with us about photogrammetry, Gaussian splatting, and cats' passion for archaeology)

Non parlare di goblin, gremlins, procioni, troll, orchi, piccioni o altro animali o creature...METACOSE 29 racconta:→ Co...
04/05/2026

Non parlare di goblin, gremlins, procioni, troll, orchi, piccioni o altro animali o creature...

METACOSE 29 racconta:
→ Codex infestata da goblin con la torcia
→ Microsoft e OpenAI mollano l'esclusiva, salta la clausola AGI
→ Big Tech porta il capex AI 2026 a 700 miliardi, record
→ Gli Oscar codificano: recitare è cosa da umani
→ Sviluppatori svuotano gli scaffali di Mac Mini per scappare dal cloud (e noi tra loro)

E altro...

La newsletter di Ambiens sul futuro presente. Gratis, ogni due settimane (link in bio).

Due sistemi, costruiti al contrario.Sul tavolo: input fisico, output digitale. La piantina dell'appartamento showroom di...
30/04/2026

Due sistemi, costruiti al contrario.

Sul tavolo: input fisico, output digitale. La piantina dell'appartamento showroom di C&C è reale — pedine con tag magnetici, campioni materiale appoggiati sugli arredi. Il sistema legge ogni spostamento e aggiorna il render sul ledwall in tempo reale. Cambi un tessuto, l'ambiente cambia.

Sul libro-scultura: nessun touch, nessun device. Il catalogo di C&C è proiettato su una superficie vuota. Il live tracking delle mani dei visitatori nello spazio — a mezz'aria — diventa l'unico input. La proiezione risponde al gesto di sfoglio.

Two systems, built in reverse.

At the table: physical input, digital output. The floor plan of the C&C showroom apartment is real — magnetic-tagged pieces, material samples placed on scale furniture. The system reads every move and updates the render on the ledwall in real time. Change a fabric, the room changes.

On the book sculpture: no touch, no device. The C&C catalog is projected onto an empty surface. Live hand tracking in open space — mid-air — is the only input. The projection responds to a browsing gesture.

Wire it. Build it. Code it. Run it.Come nasce un'esperienza phygital, made by us entirely.
14/04/2026

Wire it. Build it. Code it. Run it.
Come nasce un'esperienza phygital, made by us entirely.

Indirizzo

Via Marsala 29H
Rome
00185

Orario di apertura

Lunedì 09:30 - 18:30
Martedì 09:30 - 18:30
Mercoledì 09:30 - 18:30
Giovedì 09:30 - 18:30
Venerdì 09:30 - 18:30

Notifiche

Lascia la tua email e sarai tra i primi a sapere quando Ambiens pubblica novità e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.

Contatta L'azienda

Invia un messaggio a Ambiens:

Scelte rapide

Condividi

Servizi Di Informatica Ed Elettronica nelle vicinanze