CFD FEA Service

CFD FEA Service Informazioni di contatto, mappa e indicazioni stradali, modulo di contatto, orari di apertura, servizi, valutazioni, foto, video e annunci di CFD FEA Service, Via A. Fogazzaro 13, Cologna Veneta.

CFD FEA SERVICE is a company specialized in four type of services:
- CloudHPC provider
- Mechanical engineering consulting
- Civil engineering consulting in Fire Prevention
- Training to opensource CFD / FEA / FEM software

𝗖𝗢𝗡𝗧𝗔𝗠 𝘃𝘀 𝗙𝗗𝗦: 𝗶𝘀 𝗮𝗻 𝗮𝗶𝗿𝗳𝗹𝗼𝘄 𝗻𝗲𝘁𝘄𝗼𝗿𝗸 𝗲𝗻𝗼𝘂𝗴𝗵 𝗳𝗼𝗿 𝘀𝘁𝗮𝗶𝗿 𝗽𝗿𝗲𝘀𝘀𝘂𝗿𝗶𝘇𝗮𝘁𝗶𝗼𝗻? 🏢🔥We modelled the 𝘕𝘙𝘊 𝘊𝘢𝘯𝘢𝘥𝘢 10-𝘴𝘵𝘰𝘳𝘦𝘺 𝘧𝘪𝘳𝘦 𝘵𝘰𝘸𝘦𝘳 ...
28/10/2026

𝗖𝗢𝗡𝗧𝗔𝗠 𝘃𝘀 𝗙𝗗𝗦: 𝗶𝘀 𝗮𝗻 𝗮𝗶𝗿𝗳𝗹𝗼𝘄 𝗻𝗲𝘁𝘄𝗼𝗿𝗸 𝗲𝗻𝗼𝘂𝗴𝗵 𝗳𝗼𝗿 𝘀𝘁𝗮𝗶𝗿 𝗽𝗿𝗲𝘀𝘀𝘂𝗿𝗶𝘇𝗮𝘁𝗶𝗼𝗻? 🏢🔥

We modelled the 𝘕𝘙𝘊 𝘊𝘢𝘯𝘢𝘥𝘢 10-𝘴𝘵𝘰𝘳𝘦𝘺 𝘧𝘪𝘳𝘦 𝘵𝘰𝘸𝘦𝘳 with both 𝗖𝗢𝗡𝗧𝗔𝗠 and 𝗙𝗗𝗦, using the same published leakage areas, and checked them against the original 𝘛𝘢𝘮𝘶𝘳𝘢 & 𝘒𝘭𝘰𝘵𝘦 measurements.

▪️ 𝗗𝗼𝗼𝗿𝘀 𝗰𝗹𝗼𝘀𝗲𝗱, 𝘂𝗻𝗶𝗳𝗼𝗿𝗺 𝘁𝗲𝗺𝗽𝗲𝗿𝗮𝘁𝘂𝗿𝗲𝘀: CONTAM is spot on, within 𝟬.𝟱 𝗣𝗮 of FDS for pure stack effect, and it runs in seconds
▪️ 𝗢𝗽𝗲𝗻 𝘀𝘁𝗮𝗶𝗿 𝗱𝗼𝗼𝗿: FDS computes a discharge coefficient of 𝟬.𝟴𝟱–𝟬.𝟵𝟬, the measured value is 𝟬.𝟴𝟱. CONTAM with the usual 𝟬.𝟲𝟱 overestimates the door Δp by 𝟲𝟬–𝟳𝟬%
▪️ 𝗖𝗼𝗹𝗱 𝘀𝘂𝗽𝗽𝗹𝘆 𝗮𝗶𝗿 𝗮𝘁 −𝟭𝟬 °𝗖: in FDS it pools at the bottom of the stair and reverses the stack effect on the first floors. A single-zone stair in CONTAM can't see it: 𝟰–𝟴 𝗣𝗮 error
▪️ 𝗙𝗶𝗿𝗲 𝗼𝗻 𝗳𝗹𝗼𝗼𝗿 𝟮: measured critical supply 𝟯.𝟰𝟴 𝗺³/𝘀. FDS stops the smoke at ~𝟯.𝟱–𝟰 𝗺³/𝘀, CONTAM asks for 𝟰.𝟰–𝟱.𝟭 𝗺³/𝘀 (25–45% conservative)

The message: use CONTAM to size the fan with doors closed, and FDS to check open doors, cold supply air and fire.

The whole FDS study ran on 𝗰𝗹𝗼𝘂𝗱𝗛𝗣𝗖 for €𝟭𝟬.𝟰𝟬.

👉 Full results, plots and costs on the blog:
https://cloudhpc.cloud/2026/10/21/contam-vs-fds-stair-pressurization/

In the field of mechanical engineering, valves play a crucial role as essential tools for controlling the flow of fluids...
26/10/2026

In the field of mechanical engineering, valves play a crucial role as essential tools for controlling the flow of fluids in various systems. Thanks to the advancement of computational fluid dynamics (CFD) software like OpenFOAM or Code_Saturne, engineers are now able to accurately predict and analyze the flow patterns inside valves, as well as calculate the associated pressure losses. This technological innovation has revolutionized the way engineers design and optimize valve systems, leading to more efficient and reliable solutions.

Moreover, with the introduction of cloud-based high-performance computing (HPC) platforms such as CloudHPC (https://cloudhpc.cloud), engineers can now perform these complex simulations and calculations rapidly, saving valuable time and resources. By leveraging the power of cloud computing, engineers can access vast computational resources on-demand, allowing them to tackle intricate valve design challenges with ease and efficiency.

Overall, the combination of advanced CFD software and cloud-based HPC platforms has significantly enhanced the capabilities of mechanical engineers in analyzing and optimizing valve systems. This technological synergy has opened up new possibilities for innovation and improved performance in various industries where valves are essential components.

𝗦𝘁𝗲𝗰𝗸𝗹𝗲𝗿 𝗿𝗼𝗼𝗺 𝗳𝗶𝗿𝗲: 𝗙𝗗𝗦 𝘃𝘀 𝗢𝗽𝗲𝗻𝗙𝗢𝗔𝗠 𝘄𝗶𝘁𝗵 𝗮 𝗵𝗲𝗮𝘁-𝘀𝗼𝘂𝗿𝗰𝗲 𝗳𝗶𝗿𝗲 𝗮𝗻𝗱 𝗽𝗮𝘀𝘀𝗶𝘃𝗲 𝘀𝗼𝗼𝘁.We ran Steckler 𝘛𝘦𝘴𝘵 14 in 𝗙𝗗𝗦 and 𝗢𝗽𝗲𝗻𝗙𝗢𝗔𝗠...
26/10/2026

𝗦𝘁𝗲𝗰𝗸𝗹𝗲𝗿 𝗿𝗼𝗼𝗺 𝗳𝗶𝗿𝗲: 𝗙𝗗𝗦 𝘃𝘀 𝗢𝗽𝗲𝗻𝗙𝗢𝗔𝗠 𝘄𝗶𝘁𝗵 𝗮 𝗵𝗲𝗮𝘁-𝘀𝗼𝘂𝗿𝗰𝗲 𝗳𝗶𝗿𝗲 𝗮𝗻𝗱 𝗽𝗮𝘀𝘀𝗶𝘃𝗲 𝘀𝗼𝗼𝘁.

We ran Steckler 𝘛𝘦𝘴𝘵 14 in 𝗙𝗗𝗦 and 𝗢𝗽𝗲𝗻𝗙𝗢𝗔𝗠 𝟭𝟰 on the same 5 cm grid and compared temperatures, door flows, soot density and visibility.

▪️ OpenFOAM's hot layer is 𝘄𝗶𝘁𝗵𝗶𝗻 𝗮𝗯𝗼𝘂𝘁 𝟮 °𝗖 𝗼𝗳 𝘁𝗵𝗲 𝗲𝘅𝗽𝗲𝗿𝗶𝗺𝗲𝗻𝘁 with transient wall conduction
▪️ OpenFOAM puts the 𝘀𝗺𝗼𝗸𝗲 𝗹𝗮𝘆𝗲𝗿 𝗮𝗯𝗼𝘂𝘁 𝟬.𝟮 𝗺 𝗵𝗶𝗴𝗵𝗲𝗿 than FDS
▪️ 𝗗𝗼𝗼𝗿 𝗳𝗹𝗼𝘄𝘀 𝗮𝗯𝗼𝘂𝘁 𝟭𝟯% 𝗹𝗼𝘄𝗲𝗿 than FDS with an imposed heat source
▪️ FDS cost €𝟬.𝟳𝟮, OpenFOAM €𝟯.𝟳𝟮–𝟱.𝟵𝟱 on cloudHPC

👉 Full results and plots:
https://cloudhpc.cloud/2026/10/21/steckler-room-fire-fds-vs-openfoam-with-a-heat-source-fire-and-passive-soot/

23/10/2026

𝗗𝗮𝗺 𝗯𝗿𝗲𝗮𝗸 𝘄𝗶𝘁𝗵 𝗮𝗻 𝗼𝗯𝘀𝘁𝗮𝗰𝗹𝗲: 𝘀𝗮𝗺𝗲 𝗰𝗮𝘀𝗲, 𝘁𝗵𝗿𝗲𝗲 𝘀𝗼𝗹𝘃𝗲𝗿𝘀, 𝗮𝗹𝗹 𝗼𝗻 𝗰𝗹𝗼𝘂𝗱𝗛𝗣𝗖.

We ran the classic 𝘥𝘢𝘮𝘉𝘳𝘦𝘢𝘬 in 𝗢𝗽𝗲𝗻𝗙𝗢𝗔𝗠 𝟭𝟰, 𝗢𝗽𝗲𝗻𝗙𝗢𝗔𝗠 𝘃𝟮𝟲𝟬𝟲 (also with AMR) and 𝗗𝘂𝗮𝗹𝗦𝗣𝗛𝘆𝘀𝗶𝗰𝘀 𝟱.𝟰 on a GPU.

▪️ OpenFOAM 14 and v2606 give 𝘁𝗵𝗲 𝘀𝗮𝗺𝗲 𝗮𝗻𝘀𝘄𝗲𝗿 𝗼𝗻 𝘁𝗵𝗲 𝘀𝗮𝗺𝗲 𝗺𝗲𝘀𝗵
▪️ VOF and SPH 𝗮𝗴𝗿𝗲𝗲 𝘄𝗶𝘁𝗵𝗶𝗻 𝗮 𝗳𝗲𝘄 𝗽𝗲𝗿𝗰𝗲𝗻𝘁 once the resolution is adequate
▪️ 𝟭𝟳𝟬𝗸 𝗦𝗣𝗛 𝗽𝗮𝗿𝘁𝗶𝗰𝗹𝗲𝘀: 𝟳 𝗺𝗶𝗻𝘂𝘁𝗲𝘀 on one T4 GPU
▪️ The whole uniform-mesh OpenFOAM study cost 𝗮𝗯𝗼𝘂𝘁 €𝟬.𝟱𝟴

👉 Full results, plots and cost table:
https://cloudhpc.cloud/2026/10/20/dam-break-with-an-obstacle-openfoam-14-openfoam-v2606-and-dualsphysics-on-cloudhpc/

22/10/2026

In the realm of computational fluid dynamics (CFD), various techniques can be utilized to address turbulence 🌀. Two commonly used methods include:
👉 Large Eddy Simulation (LES)
👉 Reynolds Averaged Navier Stokes (RANS)
While LES offers higher accuracy, it necessitates significant hardware resources. On the other hand, RANS is generally less precise but can help reduce overall computational expenses.
For enhanced accuracy and ease of implementation of both techniques, check out https://buff.ly/34k7Dcg! 💯

21/10/2026

𝗪𝗵𝗮𝘁 𝗱𝗼𝗲𝘀 𝗮 𝗰𝗶𝘁𝘆'𝘀 𝗮𝗶𝗿 𝗹𝗼𝗼𝗸 𝗹𝗶𝗸𝗲 𝘄𝗵𝗲𝗻 𝘆𝗼𝘂 𝘀𝗶𝗺𝘂𝗹𝗮𝘁𝗲 𝗶𝘁 𝗼𝗻 𝗮 𝗚𝗣𝗨?

We ran OpenLB on cloudHPC GPUs to follow PM2.5 pollution through a city district, under measured wind conditions.

The case is `urbanDigitalTwin3d` from the OpenLB examples: a large-eddy simulation of the wind, coupled with an advection-diffusion lattice for the pollutant. Buildings come from OpenStreetMap, trees are porous media, and the sources are scaled from air quality station data.

𝗧𝗵𝗲 𝗿𝘂𝗻
• 2.25 million cells, 1 m resolution
• 8 minutes of physical time
• One NVIDIA T4 GPU, about 2 h 40 min of solver time
• 50 MLUPs on average
• €3.55 for the whole job, including build and upload

𝗛𝗼𝘄 𝗶𝘁 𝘄𝗼𝗿𝗸𝘀 𝗼𝗻 𝗰𝗹𝗼𝘂𝗱𝗛𝗣𝗖
You upload the case folder (Makefile, source and data files). cloudHPC builds it with CUDA on the GPU machine, runs it and archives the results. No MPI setup, no GPU drivers to install.

Two honest notes: this shows the workflow and the results, not a validation against measurements, and the concentration is in the solver's own units.

The full post has the setup, the log, the animations of PM2.5 and wind, and the steps to repeat it:
https://cloudhpc.cloud/2026/10/19/openlb-on-cloudhpc-gpus-simulating-pollutant-dispersion-in-a-city-district/

𝗠𝗮𝘀𝘁𝗲𝗿𝗶𝗻𝗴 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗶𝗻𝘁𝗲𝗴𝗿𝗶𝘁𝘆 𝗼𝗻𝗲 𝘃𝗶𝗯𝗿𝗮𝘁𝗶𝗼𝗻 𝗮𝘁 𝗮 𝘁𝗶𝗺𝗲! 🏗️ As a technical engineer, I'm always looking for ways to ensur...
20/10/2026

𝗠𝗮𝘀𝘁𝗲𝗿𝗶𝗻𝗴 𝘀𝘁𝗿𝘂𝗰𝘁𝘂𝗿𝗮𝗹 𝗶𝗻𝘁𝗲𝗴𝗿𝗶𝘁𝘆 𝗼𝗻𝗲 𝘃𝗶𝗯𝗿𝗮𝘁𝗶𝗼𝗻 𝗮𝘁 𝗮 𝘁𝗶𝗺𝗲! 🏗️ As a technical engineer, I'm always looking for ways to ensure safety and optimize designs. Recently, I've been diving into 𝘍𝘪𝘯𝘪𝘵𝘦 𝘌𝘭𝘦𝘮𝘦𝘯𝘵 𝘔𝘦𝘵𝘩𝘰𝘥 (𝘍𝘌𝘔) 𝘢𝘯𝘢𝘭𝘺𝘴𝘪𝘴 𝘧𝘰𝘳 𝘴𝘤𝘢𝘧𝘧𝘰𝘭𝘥𝘪𝘯𝘨 𝘴𝘵𝘳𝘶𝘤𝘵𝘶𝘳𝘦𝘴 to evaluate their dynamic behavior.

We've been using FEM to perform two key analyses:

𝗠𝗼𝗱𝗮𝗹 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀: This helps us identify the natural frequencies of the scaffolding. Understanding these vibration frequencies is crucial because if an external force (like wind or a machine) matches one of these frequencies, it can lead to resonance, causing excessive vibrations and potential structural failure.

𝗛𝗮𝗿𝗺𝗼𝗻𝗶𝗰 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀: This takes things a step further by evaluating the structure's response to periodic forces at various frequencies. It's how we predict how the scaffolding will behave under continuous, rhythmic loads, ensuring it remains stable and safe.

𝗧𝗵𝗲 𝗯𝗲𝘀𝘁 𝗽𝗮𝗿𝘁? We're leveraging 𝗖𝗹𝗼𝘂𝗱𝗛𝗣𝗖 to run these computationally intensive simulations. This platform provides access to remote, high-performance computing resources, which means we can get complex results faster without needing expensive in-house hardware. We've been using open-source software like CalculiX, Code_Aster, and OpenRADIOSS to perform these analyses.

This approach not only enhances the safety of our projects but also streamlines the design process.

Do you know that  , the widely used     software, offers various branches, with two of the most common being OpenFOAM.co...
17/10/2026

Do you know that , the widely used software, offers various branches, with two of the most common being OpenFOAM.com and OpenFOAM.org?

For those unsure of which branch to utilize, you can sign up for our cloudhpc.cloud platform, where you can access both options along with a plethora of other tools designed to assist you in managing your simulations. Some of these tools include ParaView, cfMesh+, SALOME, preCICE, scilab, humidityRHOTHERMO compiled in v8 and v2012, openInjMoldSim compiled in v7, and OpenQBMM compiled in v2106.

It's important to note that this collection of tools is not endorsed or sanctioned by OpenCFD Limited, the company behind the OpenFOAM software. They are the producers and distributors of OpenFOAM and hold the trademarks for OPENFOAM® and OpenCFD®.

By exploring the various branches of OpenFOAM and utilizing the additional tools available on our platform, you can enhance your simulation capabilities and streamline your workflow in the field of computational fluid dynamics.

Excited to share our 𝗹𝗮𝘁𝗲𝘀𝘁 𝗱𝗲𝗲𝗽 𝗱𝗶𝘃𝗲 𝗶𝗻𝘁𝗼 𝗙𝗶𝗻𝗶𝘁𝗲 𝗘𝗹𝗲𝗺𝗲𝗻𝘁 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀 (𝗙𝗘𝗔) of a drone frame! 🚀 Using open-source powerhous...
13/10/2026

Excited to share our 𝗹𝗮𝘁𝗲𝘀𝘁 𝗱𝗲𝗲𝗽 𝗱𝗶𝘃𝗲 𝗶𝗻𝘁𝗼 𝗙𝗶𝗻𝗶𝘁𝗲 𝗘𝗹𝗲𝗺𝗲𝗻𝘁 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀 (𝗙𝗘𝗔) of a drone frame! 🚀 Using open-source powerhouses SALOME for meshing (with the fantastic 𝘯𝘦𝘵𝘨𝘦𝘯 𝘢𝘭𝘨𝘰𝘳𝘪𝘵𝘩𝘮!) and 𝗖𝗼𝗱𝗲_𝗔𝘀𝘁𝗲𝗿 for static (via STAT_NON_LINE) and modal (using CALC_MODES) analyses, we explored its structural dynamics.

A key takeaway? 𝘛𝘩𝘦 𝘪𝘯𝘤𝘳𝘦𝘥𝘪𝘣𝘭𝘦 𝘪𝘮𝘱𝘢𝘤𝘵 𝘰𝘧 𝘱𝘢𝘳𝘢𝘭𝘭𝘦𝘭 𝘱𝘳𝘰𝘤𝘦𝘴𝘴𝘪𝘯𝘨! We supercharged our simulations by leveraging multiple cores and, crucially, the on-demand high-performance computing resources of CloudHPC. ☁️

𝗧𝗵𝗶𝘀 𝗱𝗿𝗮𝘀𝘁𝗶𝗰𝗮𝗹𝗹𝘆 𝗰𝘂𝘁 𝗱𝗼𝘄𝗻 𝗰𝗼𝗺𝗽𝘂𝘁𝗮𝘁𝗶𝗼𝗻 𝘁𝗶𝗺𝗲, 𝗺𝗮𝗸𝗶𝗻𝗴 𝗶𝘁𝗲𝗿𝗮𝘁𝗶𝘃𝗲 𝗱𝗲𝘀𝗶𝗴𝗻 𝗮𝗻𝗱 𝗼𝗽𝘁𝗶𝗺𝗶𝘇𝗮𝘁𝗶𝗼𝗻 𝗮 𝗯𝗿𝗲𝗲𝘇𝗲.

Read the full story and see the visual results: https://cloudhpc.cloud/2025/07/29/decoding-drone-fem-a-journey-with-code_aster-and-cloudhpc/

🌊 𝗠𝗮𝘀𝘁𝗲𝗿𝗶𝗻𝗴 𝗛𝘆𝗱𝗿𝗼𝗱𝘆𝗻𝗮𝗺𝗶𝗰 𝗟𝗼𝗮𝗱 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀 𝗶𝗻 𝗣𝗮𝗿𝗮𝗩𝗶𝗲𝘄Quantifying the resultant forces acting on complex geometries—like a w...
13/10/2026

🌊 𝗠𝗮𝘀𝘁𝗲𝗿𝗶𝗻𝗴 𝗛𝘆𝗱𝗿𝗼𝗱𝘆𝗻𝗮𝗺𝗶𝗰 𝗟𝗼𝗮𝗱 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀 𝗶𝗻 𝗣𝗮𝗿𝗮𝗩𝗶𝗲𝘄

Quantifying the resultant forces acting on complex geometries—like a water pump impeller—is a critical step in assessing structural integrity and hydraulic efficiency.

However, extracting these values accurately from CFD data requires a 𝗿𝗶𝗴𝗼𝗿𝗼𝘂𝘀 𝗽𝗼𝘀𝘁-𝗽𝗿𝗼𝗰𝗲𝘀𝘀𝗶𝗻𝗴 𝘄𝗼𝗿𝗸𝗳𝗹𝗼𝘄.In my latest technical blog post, I dive deep into the engineering methodology for calculating pressure and shear forces using ParaView.

🛠️ 𝗞𝗲𝘆 𝗧𝗲𝗰𝗵𝗻𝗶𝗰𝗮𝗹 𝗧𝗮𝗸𝗲𝗮𝘄𝗮𝘆𝘀:

𝗩𝗲𝗰𝘁𝗼𝗿 𝗜𝗻𝘁𝗲𝗴𝗿𝗮𝘁𝗶𝗼𝗻: Leveraging the IntegrateVariables filter for precise surface integrals.

𝗡𝗼𝗿𝗺𝗮𝗹 𝗔𝗹𝗶𝗴𝗻𝗺𝗲𝗻𝘁: Ensuring correct orientation with Generate Surface Normals for accurate F_p = -p n dA calculations.

𝗦𝗵𝗲𝗮𝗿 𝗦𝘁𝗿𝗲𝘀𝘀 𝗔𝗻𝗮𝗹𝘆𝘀𝗶𝘀: Incorporating wall shear stress tensors into the total force vector.

𝗥𝗲𝗮𝗹-𝗪𝗼𝗿𝗹𝗱 𝗔𝗽𝗽𝗹𝗶𝗰𝗮𝘁𝗶𝗼𝗻: A step-by-step walkthrough using a water pump impeller case study.

Whether you are optimizing for cavitation reduction or conducting FEA prep, understanding the underlying pipeline in 𝘗𝘢𝘳𝘢𝘝𝘪𝘦𝘸 𝘪𝘴 𝘦𝘴𝘴𝘦𝘯𝘵𝘪𝘢𝘭 for high-fidelity engineering.

Read the full technical breakdown here: https://cloudhpc.cloud/2026/01/09/calculating-forces-on-surfaces-in-paraview-a-technical-guide-for-engineers/

Indirizzo

Via A. Fogazzaro 13
Cologna Veneta
37047

Orario di apertura

Lunedì 09:00 - 17:00
Martedì 09:00 - 17:00
Mercoledì 09:00 - 17:00
Giovedì 09:00 - 17:00
Venerdì 09:00 - 17:00

Telefono

+393783033133

Notifiche

Lascia la tua email e sarai tra i primi a sapere quando CFD FEA Service pubblica novità e promozioni. Il tuo indirizzo email non verrà utilizzato per nessun altro scopo e potrai annullare l'iscrizione in qualsiasi momento.

Contatta L'azienda

Invia un messaggio a CFD FEA Service:

Scelte rapide

Condividi

Servizi Di Informatica Ed Elettronica nelle vicinanze