Digitec Systems

23/12/2021

We are Hiring!
Position: Software Engineer
Experience: Net(C #,Asp .Net, Webforms, MVC), Asp .Net Wep Api, ADO .Net, Sql Server,
Android Development (JAVA).
Interested candidates send thier Resume at
[email protected]

Send a message to learn more

04/09/2021

Water Tank Level Meter (For Underground Tanks)
Easy to install.
No need to install anything inside water tank.
1 year warranty.
High level of safety against any risk of short-circuit.
Buzzer will ring at last 10% indicator.
10/15 ft pipe

This unit is housed in a rugged wall mount casing, it is very easy to install and calibrate. Once installed/calibrated the unit will continuously display the overhead or underground tank Level on a two digit numeric display. There is always an air column between the liquid and the device so the unit can be used with all non-corrosive liquids beside water. The reading show tank level from 00 to 99, Indicating when tank is empty or when it is completely full.
For Queries Contact: (021) 35076882 | (021) 35120967-9

Order Now:
For 10 Ft Pipe:
https://www.daraz.pk/products/i231634243.html?spm=a1zawk.23436738.content_wrap.6.6e954edfTzsMHe
For 15 Ft Pipe:
https://www.daraz.pk/products/i231634559.html?spm=a1zawk.23436738.content_wrap.9.6e954edfBlBMb5

04/09/2021

Water Tank Level Meter
Easy to install.
No need to install anything inside water tank.
1 year warranty.
High level of safety against any risk of short-circuit.
Buzzer will ring at last 10% indicator.

This unit is housed in a rugged wall mount casing, it is very easy to install and calibrate. Once installed/calibrated the unit will continuously display the overhead or underground tank Level on a two digit numeric display. There is always an air column between the liquid and the device so the unit can be used with all non-corrosive liquids beside water. The reading show tank level from 00 to 99, Indicating when tank is empty or when it is completely full.

Contact Us: (021) 35076882 | (021) 35120967-9

Order Now:
https://www.daraz.pk/products/i190396198.html?spm=a1zawk.23436738.content_wrap.52.6e954edfTzsMHe

29/03/2021

G-Link GSM Hot Line Phone
Direct Dialing to preprogrammed Numbers.
No chance of over billing as it can call only the Friend and family (FNF) number.
Receive all Incoming Calls .
PTA approved GSM module.
Send nearest Cell Tower Location (LBS) through SMS .
Important when installed in a Vehicle.

Oder Now | Call Us On : 02135076882

29/03/2021

GSM FWT (FIXED Wireless terminal)
GSM to fixed line converter unit is a an indispensable device for any office. Once connected to the PABX it provides a backup to PTCL and also reduce the telephone expense as mobile calls can be made through this rather then using the more expensive PTCL network, can be used with security alarm system to provide a reliable connection to the alarm controller.
Provides a Fixed Telephone Line (PSTN) using the GSM network.
• Connect GSM number with PABX /Security Alarm System or Normal Landline Phone.
• PTA Approved
• Provides a Fixed Telephone Line (PSTN) using the GSM network.
• Connect GSM number with PABX /Security Alarm System or Normal Landline Phone.
• PTA Approved

Oder Now | Call Us On : 02135076882

29/03/2021

GSA-1000 is a GSM Based Alarm system for use in Homes, Offices, Warehouses, Showrooms, Alarm System application. The System being GSM based is immune from any tempering.
It has the following broad features.
• Alert type Call / SMS on predefined mobile Number.
• Maximum Eight Zone.
• Zone Type Programmable as Normally Close (NC) & Normally Open NO.
• One Hotter Output and Two Miscellaneous Outputs Along with Door open Alert.
• Mains Failure and Battery Low Alarm.
• 2x16 Characters LCD Alpha Numeric Keypad,
• Zone Bypass and Delay timers Programmable.
• Messaging up to three different Servers.
• All Features programmable.
• Able to stored ARM/Disarmed state even after switch off.
• 24 Hour Active Panic Button.
• Remote ARM/Disarm through mobile from any of three server numbers.

Oder Now | Call Us On : 02135076882

20/08/2020

FPM10 Optical Fingerprint/Biometric Sensor Module

> Compatible with Software(sfg demo)
> Supply voltage: DC 3.6
> Supply current: < 120 mA
> Peak current: < 140mA
> Fingerprint image time: < 1.0 seconds
> Window size: 14 x 18 mm
> Matching mode: Match mode (1 : 1)
> Search mode: (1 : N)
> Signature file: 256 bytes
> Template files: 512 bytes
> Storage capacity: 300
> Safety level: Five (from low to high: 1, 2, 3, 4, 5)
> False accept rate (FAR): < 0.001% (security level 3)
> False reject rate (FRR): < 1.0% (security level 3)
> Search time: < 1.0 seconds (1:500, mean)
> PC interface: UART (TTL logic level) or USB2.0 / USB1.1
> Communication baud rate (UART): (9600 x N) bps where N
= 1 ~ 12 (default value N = 6, ie 57600bps)

Usage is very simple Single : As long as there are serial micro controller , embedded can operate this module, MSP430 , 51 , AVR , PIC , the STM32, ARM, FPGA, the Arduino controller, pcDuino and so can operate this module. This module through the serial port control, you can also use the computer’s serial port to control this module. Products from optical fingerprint sensors , high-speed DSP processor, high-performance fingerprint alignment algorithm, large capacity FLASH chips and other hardware and software. The fingerprint module has stable performance and perfect functions, and has many functions such as fingerprint collection, fingerprint registration, fingerprint comparison and fingerprint search

Oder Now | Call Us On : 02135076882

20/08/2020

AS608 Fingerprint/Biometric Reader Sensor Module

> Compatible with Software(sfg demo)
> Supply voltage: DC 3.3v
> Supply current: working current: Peak current: Fingerprint image entry time: < 1.0 seconds
> Window area: 15.3x18.2MM

How the Module Works:

Fingerprint features
1.The fingerprint algorithm extracts features from the acquired fingerprint image and represents the fingerprint information.
The storage, comparison and search of fingerprints are all done by operating fingerprint features.

2. Fingerprint processing includes two processes: fingerprint registration process and fingerprint matching process (in
which fingerprint matching is divided into fingerprint comparison (1:1) and fingerprint search (1:N) two ways).

3. When the fingerprint is registered, two fingerprints are entered for each fingerprint, and the input image is processed
twice. The synthesis module is stored in the module.

4. When the fingerprint is matched, the fingerprint sensor is used to input the fingerprint image to be verified and
processed, and then it is compared with the fingerprint module in the module (if it is matched with a module specified in the
module, it is called fingerprint comparison mode, ie, 1:1 mode. If matching with multiple modules is called fingerprint
search, ie 1:N mode, the module gives the matching result (pass or fail).

Oder Now | Call Us On : 02135076882