Cyfro-Tech

Cyfro-Tech Elektronika samochodowa, diagnostyka, chiptuning i naprawy sterowników.

12/11/2026

27/10/2026

MyPuppyD – free map editor for beginners 🐶

Drop in a BIN, the app identifies the ECU (SW/HW), finds maps on its own, calculates and repairs checksums. Edit in grid, 2D and 3D, change history with undo.

Lopper: ready-made solutions for DPF, EGR, DTC, AdBlue, MAF, Lambda, Start-Stop and more – 682 variants, 248 ECUs, 67 brands.

Open alpha – verify all results yourself.

Download : https://mega.nz/file/yYkwTBSK -505wdwKpiEewZ65yOYyAlchB0

MyPuppyD – Free ECU Mapping Tool for BeginnersMyPuppyD is a free tool created to make ECU map editing and analysis more ...
27/10/2026

MyPuppyD – Free ECU Mapping Tool for Beginners

MyPuppyD is a free tool created to make ECU map editing and analysis more accessible to beginners. It combines automatic ECU recognition, map detection, an integrated map editor with gradient adjustment, and automatic checksum correction in one application.

⬇️ Download MyPuppyD: https://mega.nz/file/yYkwTBSK -505wdwKpiEewZ65yOYyAlchB0

Simply load a BIN file, and the software will identify the ECU, including its type and available software/hardware information. It then scans the binary using a pattern-based database to locate maps.

Detected maps can be viewed and modified in a 2D table, a 2D graph, or a 3D visualization. You can adjust values directly, apply percentage corrections, modify gradients, and select multiple cells at once. All edits are tracked in the project history, with undo functionality, version comparisons, and visual highlighting of modified values.

Checksum handling is integrated into the workflow, with automatic calculation and correction before the modified file is saved.

Built-in service solution module – Lopper

MyPuppyD includes a dedicated section with predefined service solutions for recognized ECUs, covering:

DPF, EGR and DTC
AdBlue, MAF and TVA
Lambda, Flaps and Start-Stop
Readiness

The software also provides warnings about components that may require physical disconnection in the vehicle.

Currently, the application supports 372 solution variants covering 148 ECU modules and 67 vehicle brands. Its map detection database covers 141 ECU families.

If a map is missing from the database, you can contribute your own patterns through the Learning/Detection section by providing a BIN file together with its corresponding CSV data. This allows the detection database to expand over time without requiring a program update.

Main features
Automatic ECU identification – detects ECU type, software and hardware versions, Bosch/SID/EV_ECM identifiers, and brand or date information available in the binary.
Pattern-based map detection – uses dedicated databases for individual ECU families, with support for adding new patterns.
Integrated map editor – 2D grid, 2D charts, 3D visualization, value editing, percentage adjustments, gradient tools, and multi-cell selection.
Project history and version control – tracks individual cell changes, supports undoing previous edits, and compares different project versions.
Automatic checksum correction – calculates and repairs supported checksums before saving.
Lopper service solutions – includes predefined solutions and the ability to create custom pattern-to-replacement rules.
DTC management – allows individual fault codes to be read and disabled, including their associated addresses.
File format support – import and export BIN, Intel HEX, Motorola S-Record, hexdumps, CSV/XDF map files, and .prj projects.
Custom pattern learning – train map detection using paired BIN and CSV files.
ECU database export – export the supported ECU list to PDF or JSON.
Interface customization – configurable colors, keyboard shortcuts, and gradient settings.
Development roadmap

The upcoming development priorities are to improve and optimize the existing code structure, introduce a limiter-curve module with power estimation, and then continue expanding both the automatic service solution library and the number of ECUs supported by map detection.

Important: MyPuppyD is currently in open alpha. Its detections and generated solutions should be treated as suggestions and independently verified before use. Always validate modifications and ensure the vehicle remains safe and compliant with applicable regulations.

Hello everyone!I’d like to introduce a tool designed to simplify and automate the handling of mappacks.The application e...
27/10/2026

Hello everyone!

I’d like to introduce a tool designed to simplify and automate the handling of mappacks.

The application extracts data from WinOLS project files (.ols) and converts it into widely supported, open formats, including .csv, .xdf, and .xml. This makes it possible to migrate entire mappacks from WinOLS to open-format solutions.

Another advantage is that the software operates independently of WinOLS. It also supports the conversion and recovery of single-user locked .bin files. When linked to a single account, it can additionally generate .xdf files.

The application also includes a dedicated converter for Ecm Titanium (.Dtr) projects, allowing them to be transformed into open .xdf map libraries. Pricing details can be found directly in the application through the provided link.

Have any questions, encountered an issue, or have a suggestion for improvement? Leave a comment on the homepage or contact me via private message!

Cyfro-Tech

You can also try the application for free and preview one selected map before deciding to use the full functionality.

🔗 page: https://facebook.com/61574776935033

⬇️ Download WinGuiBot v1.1.6: https://mega.nz/file/DQcl3BxD

MyPuppyD is a free application for beginners. It offers automatic service solutions, a map editor (with gradient editing...
13/09/2026

MyPuppyD is a free application for beginners. It offers automatic service solutions, a map editor (with gradient editing), map search for learned ECUs, and a built-in checksum corrector.

Download: https://mega.nz/file/zdlRUa6K

You drop in a BIN file, MyPuppyD identifies the ECU type and the SW/HW version, and then searches the binary for maps using its own pattern database.
You open maps in a grid, on a 2D chart or in a 3D view, edit them by percentage or by value, and every change is stored in the project history with undo and version comparison.
Checksums are calculated and repaired automatically before saving.

The Lopper tab adds ready-made service solutions for the detected ECU: DPF, EGR, DTC, AdBlue, MAF, TVA, Lambda, Flaps, Start-Stop, Readiness — together with warnings about what has to be physically disconnected in the car.
372 solution variants are supported across 148 ECU modules and 67 vehicle brands, and the map scanner knows 141 ECU families.
Didn't find a map you know is there? The Learning/Detection tab lets you teach the program new patterns from a file + CSV pair — the database grows along with you.

The application is in open alpha: all results are suggestions that you should verify yourself.

Feature list:

- ECU identification from the BIN alone: type, SW, HW, Bosch/SID/EV_ECM number, brands and dates found in the binary
- automatic pattern-based map search — a separate database for each ECU family, extendable without updating the program
- map editor: 2D grid, 2D chart, 3D view, +/- correction, value insertion, % increase, gradient editing, multi-selection
- versioned projects, cell-level change history, undo to any point in time, change highlighting
- checksums calculated automatically and repaired before saving
- Lopper: DPF, EGR, DTC, AdBlue, MAF, TVA, Lambda, Flaps, Start-Stop, Readiness + your own solutions (pattern → replacement)
- reading and disabling individual DTC codes with their addresses
- import/export: BIN, Intel HEX, Motorola S-Record, hexdump, CSV/XDF map files, .prj projects
- learning your own map patterns from a BIN + CSV pair
- export of the supported ECU list to PDF and JSON
- configurable colors, keyboard shortcuts and gradients

The next development goals, in order: improving and optimizing the existing structure, building a module for the limiter curve (with power estimation),
and finally expanding the list of supported automatic solutions and of ECUs available for map search.

Hello!I'd like to present an application that automates working with mappacks. Ours decompiles project files (.ols) and ...
25/04/2026

Hello!

I'd like to present an application that automates working with mappacks. Ours decompiles project files (.ols) and then compresses them into open formats such as .csv, .xdf, and .xml.
This allows for full migration of mappacks from the WinOLS format to open standards!

What's more, the application works without WinOLS, allowing conversion of single-user locked .bin files and recovery,
and if assigned to a single account, you can create "xdf" files.

It has a built-in phaser for converting Ecm Titanium (.Dtr) projects to open .xdf libraries. The price is available in the application via a hyperlink.
Have questions, problems, or ideas? Feel free to leave a comment on the home page or send a private message! Cyfro-Tech

You can test and preview one selected map for free.

🔗 page:

https://facebook.com/61574776935033

⬇️ Download the app here:

https://mega.nz/file/yIkU2CbC

WinGuiBot v1.1.5

Hello!I'd like to present an application that automates working with mappacks. Ours decompiles project files (.ols)and t...
05/04/2026

Hello!

I'd like to present an application that automates working with mappacks. Ours decompiles project files (.ols)
and then compresses them into open formats: .csv, .xdf, and .xml.
This enables full migration of mappacks from the WinOLS format to open standards!
What's more, the application works without WinOLS, allowing conversion of even encrypted or locked projects and recovery of .bin files.
And if it's assigned to a single account, you can create "xdf" files.
It has a built-in phaser for converting Ecm Tytanium (.Dtr) projects to open .xdf libraries, Price available in the application via hyperlink.
Do you have questions, problems or ideas? Feel free to leave a comment on the main page or write a private message! Cyfro-Tech

🔗 page:

https://facebook.com/61574776935033

⬇️ Download the app here: https://mega.nz/file/KAs3kRAC

WinGuiBot v1.1.0:

-added full support for .ols WinOls
-fixed convert bug
-fixed minor reported bugs

Adres

Piłsudskiego 107b
Marki
05-270

Godziny otwarcia

Poniedziałek 09:00 - 20:00
Wtorek 09:00 - 20:00
Środa 09:00 - 20:00
Czwartek 03:00 - 20:00
Piątek 03:00 - 20:00

Telefon

+48451290337

Strona internetowa

Powiadomienia

Bądź na bieżąco: wyślemy Ci e-mail, gdy Cyfro-Tech opublikuje nowości i promocje. Twój adres e-mail nie zostanie wykorzystany do żadnego innego celu, a subskrypcję możesz anulować w dowolnym momencie.

Kontakt: Firmę

Wyślij wiadomość do Cyfro-Tech:

Skróty

Udostępnij

Kategoria

Usługi Komputerowe I Elektroniczne w pobliżu