Scanreco

02/09/2026

In our industry, there are many exhibitions and tradeshows. Some are bigger, some are smaller. 📍 Automatik-messen in Brøndby, Denmark is like a good old friend 💙 Familiar, welcoming, and always worth a visit.

From 8-10 September, the automation industry comes together once again for three days of technology, knowledge sharing, live demonstrations, workshops, and practical solutions for an evolving machine industry. That's why we enjoy being part of AUTOMATIK. The event brings together professionals working with automation, robotics, motion & drives, AI, cybersecurity, and the technologies shaping tomorrow's machines and production environments.

It's a great opportunity to reconnect with machine builders, system integrators, and automation specialists. As always, we'll be there to discuss how wireless machine control can enhance the machine and help improve operator productivity, safety, usability, and machine performance in increasingly connected equipment.

Whether you're looking for inspiration, new ideas, or simply a good conversation about the future of automation, we'd love to meet you. We'll be at Booth B1510!

Get insight into automation, motion & drives as a strong industry gathers at AUTOMATIK, presenting tomorrow's products, sharing cutting-edge knowledge, and more. See you there?

24/08/2026

The person choosing your machine isn't always the one who has to use it.

As the rental market continues to grow, that's becoming an increasingly important consideration for OEMs.
Machines in rental fleets are operated by people with different levels of experience, training, and familiarity with the equipment. As a result, design decisions need to account for a wider range of operator experiences, including the way radio remote controls shape the first interaction between the user and the machine.

This is about more than usability. It challenges the assumptions behind the design itself.
And when every new user starts from a different place, first impressions matter more than ever.

Explore further➡️ https://eu1.hubs.ly/H0xGkDx0

21/08/2026

🚚 Elmia Lastbil - Day 3 (På svenska nedan)
We know, we tend to repeat ourselves on this particular topic 😜, but these meetings with machine operators, truck drivers, system integrators, and machine builders are all so rewarding.

Tradeshows like Elmia Lastbil bring us closer to those of you who use our remotes in your daily work, and we truly value your feedback.

These conversations remind us why we care so much about operator productivity. For us, productivity is not only about machine performance. It's about helping operators stay focused, work efficiently, make confident decisions, and get the job done safely. When controls are intuitive and information is easy to access, operators can reduce downtime, avoid unnecessary stress, and perform at their best.

That's why we spend so much time listening. Every conversation helps us better understand the challenges operators face and how smart technology can support them, not complicate their work.

Thank you to everyone who has stopped by our stand so far. We look forward to seeing more of you during the final days of the show!

🇸🇪
Vi vet, vi säger det är ofta 😜, men mötena med maskinförare, lastbilschaufförer, systemintegratörer och maskinbyggare är verkligen bland det mest givande med mässor som den här.
Elmia Lastbil ger oss möjlighet att komma närmare er som använder våra fjärrstyrningar i ert dagliga arbete, och vi uppskattar verkligen all feedback vi får.
Samtalen vi har påminner oss om varför vi bryr oss så mycket om operatörens produktivitet. För oss handlar produktivitet inte bara om maskinens prestanda. Det handlar om att hjälpa operatörer att behålla fokus, arbeta effektivt, fatta trygga beslut och utföra jobbet på ett säkert sätt. När styrsystemen är intuitiva och informationen är lättillgänglig kan operatören minska stillestånd, undvika onödig stress och prestera på topp.
Det är därför vi lägger så mycket tid på att lyssna. Varje samtal hjälper oss att bättre förstå de utmaningar som operatörer möter och hur smart teknik kan stötta deras arbete, inte göra det mer komplicerat.
Tack till alla som har besökt vår monter hittills. Vi ser fram emot att träffa ännu fler av er under mässans sista dagar! 🚚💙

20/08/2026

“See what you can’t see” takes on a whole new meaning with real-time, multi-camera visibility—giving operators a clearer view of their surroundings, even in the most demanding environments. With the ability to switch between multiple camera angles or monitor critical zones, they stay informed and in control.

There's still time to try this solution out at Elmia Lastbil - two more days! And if you're not i Jönköping/Sweden this week but want to know more about this solution ➡️ https://eu1.hubs.ly/H0xLXsH0

19/08/2026

Vi ses hos Scanreco i B05:79

07/08/2026

As truck mounted cranes become more advanced, so do the challenges behind their control systems.

For manufacturers and system integrators, integrating load monitoring, machine logic, and operator control into one reliable architecture is just as important as adding new machine capabilities.

That's where the CCU-X comes in.
Designed specifically for truck mounted cranes, the CCU-X is a moment limiter system that continuously monitors hydraulic cylinder pressure and compares it against configurable thresholds representing the crane’s maximum lifting capacity.

Beyond load monitoring, it manages critical machine functions such as permitted movements, working area control, outrigger monitoring, and system diagnostics. Through CAN bus integration with Scanreco radio remote controls, machine data and operator control come together within one configurable HMI architecture.

The result? A flexible control architecture that simplifies integration for OEMs by allowing them to configure machine functions according to specific crane requirements, while giving operators clear, real-time insight into machine status.

➡️ https://eu1.hubs.ly/H0xksHb0

13/07/2026

Are we designing today’s radio remote controls for tomorrow’s operators—or still for yesterday’s?

A new generation of operators is entering the workforce. And with them comes a new way of interacting with technology.
Are the machine interfaces they use evolving at the same pace as their expectations?
What does this shift mean for machine builders—and for the operator experience?

In our latest article, we explore why the operator challenge may require a different perspective and how radio remote control design could play a role.

Read the full article 👉https://eu1.hubs.ly/H0wTck_0

01/06/2026

When your machine faces the toughest conditions, Scanreco's remote controls are built to keep up - like this one here, straight from the field. Our rugged systems - engineered to withstand water, dust, vibrations, and busy radio frequency environments - ensures uninterrupted performance, even when physically beaten and covered with dirt.

And yet, it's the inside that matters. A little (or a lot) beaten up remote control doesn't stop performance. We call it Scanreco Never-Stop Technology - a design and testing philosophy that outlasts dust, moisture, vibration, and radio interference. Having sold close to a million units worldwide, most still running strong, the track record speaks for itself and is a testament of our durable and reliable products built to last into the future.

Read more about Never-Stop Technology philosophy here: https://eu1.hubs.ly/H0vMCdT0


🤔 ... wondering who has the dirtiest and most beaten up Scanreco remote and still working it hard...?

26/05/2026

More automation doesn’t automatically mean better machines.
What really makes the difference is how well the operator and the machine work together.
At Scanreco, we’ve always focused on intuitive control that lets operators work safely and efficiently - from the best possible position. With CrossControl now part of Scanreco, system integrators get stronger tools for HMI, electronics platforms, machine intelligence, and software - designed to work smoothly together.

For integrators, this can mean:

✅ Clearer and more consistent operator interfaces
✅ Better use of real‑time machine data (without added complexity)
✅ Less training needed for operators
✅ Safety and usability built in from the start
✅ Solutions that work just as well in the cab as outside the machine

The goal isn’t to replace operators - it’s to support them.
Smart, reliable machines that help people do a better job in tough, real‑world conditions.
That’s what we mean by mature automation - technology that works with the operator.

19/05/2026

New cybersecurity legislations put more responsibility on mobile machine OEMs. We've set out to help you understand the Machinery Regulation and the Cyber Resilience Act - and how they affect your machine's CE mark, lifecycle responsibilities, and your access to the European market.

Free webinars covering cybersecurity on our website - sign up to receive the link and watch on-demand at a time and place that is convenient for you: https://eu1.hubs.ly/H0vjdYF0