EXTON Linux Systems

EXTON Linux Systems EXTON Linux | Live Systems - https://www.exton.se - 16 Linux Live distributions in English

AlpEX Live System with LXQt, Refracta Snapshot and Refracta Installer – Build 261029ABOUTAlpEX is a remaster of Alpine L...
30/10/2026

AlpEX Live System with LXQt, Refracta Snapshot and Refracta Installer – Build 261029

ABOUT
AlpEX is a remaster of Alpine Linux – Small. Simple. Secure. In AlpEX have installed a full featured Desktop (LXQt 2.4) and all other Linux packages the average Linux user could want. Study a list of all installed packages in AlpEX: https://www.exton.se/alpex/alpex-installed-packages-261029.txt

LOGIN
After boot you will end up at SDDM‘s Login Page. Login as user with password live or as root with password root. While logged in as user you can use Sudo to become root.

AUDIO Stack (PipeWire & WirePlumber)
AlpEX feature a modern PipeWire sound server paired with WirePlumber as the session manager, offering complete drop-in replacement/compatibility for PulseAudio and ALSA. Pavucontrol is pre-installed for easy volume and input/output stream management.

SAMBA & Network Shares (using PCManFM-qt)
Support for accessing Windows/Samba network shares directly via the file manager (smb://) is fully configured using cifs-utils and libsmbclient. Watch this screenshot: https://www.exton.se/alpex/alpex-samba-connection-261028.jpg

WHAT IS Alpine Linux?
"Alpine Linux is an independent, non-commercial, general-purpose Linux distribution designed primarily for power users, security-minded administrators, and minimalists. Unlike mainstream distributions built around heavy GNU toolchains, Alpine is built from the ground up with a focus on security, simplicity, and resource efficiency".

BUILD Your Own ISO with Refracta Snapshot
AlpEX serve as a complete “distro-builder kit”. Boot the live environment or install it to disk/VirtualBox. Add your favorite applications, tweak themes, or adjust configurations. Launch Refracta Snapshot and create a new ISO in about 5 minutes.

PERFORMANCE
Everything works alright. The AlpEX System is very fast, especially if you run it Live from RAM.

SCREENSHOTS
1. The Desktop for user: https://www.exton.se/alpex/alpex-user-desktop-261029.jpg
2. The Desktop for root: https://www.exton.se/alpex/alpex-refractasnapshot-create-iso-261028.jpg
3. Refracta Snapshot is ready: https://www.exton.se/alpex/alpex-refractasnapshot-ready-261029.jpg
4. Refracta Installer has started: https://www.exton.se/alpex/alpex-refractainstaller-started-261029.jpg
5. Showing a Samba connection: https://www.exton.se/alpex/alpex-samba-connection-261028.jpg
6. SDDM Login Screen: https://www.exton.se/alpex/alpex-sddm-login-261029.jpg

READ MORE: https://www.exton.se/alpex-linux/

Exton Core-V Live System (two versions) with Xfce 4.20 respectively LXQt 2.4 :: Build 261024Exton Core-V Live System (tw...
25/10/2026

Exton Core-V Live System (two versions) with Xfce 4.20 respectively LXQt 2.4 :: Build 261024

Exton Core-V Live System (two versions) with Xfce 4.20 respectively LXQt 2.4 are remasters of Void Linux: Exton Core-V Xfce Edition and Exton Core-V LXQt Edition

ABOUT
Both editions are designed to be lightweight, lightning-fast, and fully customizable. Built with ease of distribution in mind, both builds come pre-installed with Refracta Snapshot, allowing users to easily modify the running system and generate their own bootable custom Live ISO in just about five (5) minutes.

WHY Void Linux?
Exton Core-V leverages the independent, rolling-release architecture of Void Linux to deliver maximum control, performance, and simplicity:

– runit Init System: Unlike distributions bound to systemd, Void Linux utilizes runit as its init service. This results in incredibly fast boot times, minimal system overhead, and straightforward service management.

– xbps Package Manager: Built from scratch for Void, the X Binary Package System (xbps) is remarkably fast at installing, updating, and querying software packages while maintaining dependency integrity.

– Complete Independence: Void Linux is not a fork or derivative of any other distribution. It is developed from the ground up by its community, offering a clean, bloat-free OS base.

– Portable & Modular: Ideal for live media deployment, rescue operations, or as a lightweight daily driver on hardware ranging from older machines to modern workstations.

PERFORMANCE
Everything works alright. The Exton Core-V System is very fast, especially if you run it Live from RAM.

SCREENSHOTS
1. The Desktop for root in Xfce4: https://www.exton.se/exton-core-v/exton-core-V-xfce4-mklive-iso-261024.jpg
2. The Desktop for root in LXQt: https://www.exton.se/exton-core-v/exton-core-v-lxqt-root-desktop-261024.jpg
3. The Desktop for user in Xfce4: https://www.exton.se/exton-core-v/exton-core-v-xfce4-eject-usb-261023.jpg
4, The Desktop for user in LXQt: https://www.exton.se/exton-core-v/exton-core-v-lxqt-user-desktop-261024.jpg
5. Showing a Samba connection in Xfce4: https://www.exton.se/exton-core-v/exton-core-v-xfce4-samba-conn-261024.jpg

READ MORE: https://www.exton.se/exton-core-v-live/

ExLight 64bit UEFI, BUILD 261019, based on Debian “forky” (upcoming Debian 14) with Enlightenment 0.27.1 (stable) as DE,...
20/10/2026

ExLight 64bit UEFI, BUILD 261019, based on Debian “forky” (upcoming Debian 14) with Enlightenment 0.27.1 (stable) as DE, Refracta Snapshot and Calamares Installer

NEWS 261019 ABOUT ExLight
I’ve made a new version of ExLight with the Enlightenment 0.27.1 Desktop environment, Refracta Snapshot (create your own Debian "forky" System) and Calamares 3.3.14-1 Installer Framework.

KERNEL
ExLight Build 261019 uses kernel 7.2.11-amd64-exton built from Debian kernel sources with Debian patches.

INSTALLED packages
Study all installed packages in ExLight Build 261019: https://exlight.exton.se/build-261019/exlight-forky-installed-packages-261019.txt

SPOTIFY
You can easily install Spotify in ExLight (even while running the system live). Just run the command "sudo apt update" followed by "sudo apt install spotify-client".

IMPORTANT about Refracta
You can use Refracta Snapshot (pre-installed in ExLight) to create your own installable Debian "forky" Live System once you have installed ExLight to hard drive. I mean change everything and then create a whole new Debian live system. When you start Refracta Snapshot it will look like this. You don’t even have to install ExLight to hard drive before you can use the Refracta Snapshot. If you have plenty of RAM you can create a new (your own!) Debian System while running ExLight from DVD or a USB stick. Please note that the whole Refracta process (creating your new ISO) only will take 10 – 50 min! You’ll find the ISO in /home/snapshot. Or change that by editing /etc/refractasnapshot.conf.

THE REAL McCoy
ExLight is a pure Debian system. I.e. no traces of Ubuntu, Kubuntu etc. New releases of Ubuntu are always based on Debian Sid. So is ExLight.

SCREENSHOTS
1. The Enlightenment 0.27.1 Desktop for user user: https://exlight.exton.se/build-261019/exlight-calamares-running-261019.jpg
2. The Enlightenment 0.27.1 Desktop for root: https://exlight.exton.se/build-261019/exlight-root-desktop-261019.jpg
3. Using NetworkManager for WiFi connections: https://exlight.exton.se/build-261019/exlight-wifi-networkmanager-261019.jpg
4. Using Refracta Snapshot: https://exlight.exton.se/build-261019/exlight-refractasnapshot-started-261019.jpg
5. Running in Qemu: https://exlight.exton.se/build-261019/exlight-running-in-qemu-261019.png

Watch a YouTube Video about ExLight. The Video is called “ExLight Linux – Lightest Distro I Have Ever Tried“. (It is not made by me): https://youtu.be/boqJXOk6HEg

A REVIEW of ExLight by The Newstack 260324 – "Exton Linux’s light version will enlighten you" - "The time I spent with ExLight was a genuine pleasure, and I would highly recommend that you download the ISO and either spin it up as a virtual machine or install it on a spare machine. You won’t regret giving this impressive distribution a try".
READ MORE: https://thenewstack.io/exton-linuxs-light-version-will-enlighten-you/

READ MORE about ExLight: https://exlight.exton.se/

EXTON RMag (Mageia 10) with Xfce4, Calamares Installer and Refracta Snapshot ::: Build 261015EXTON RMag is a remaster of...
16/10/2026

EXTON RMag (Mageia 10) with Xfce4, Calamares Installer and Refracta Snapshot ::: Build 261015

EXTON RMag is a remaster of Mageia 10 with Xfce4, Calamares Installer and Refracta Snapshot.

ABOUT
A lot of Mageia packages are kept/pre-installed. Study the full list: https://www.exton.se/rmag-261015/exton-rmag-installed-packages-261015.txt

MOST IMPORTANT: Refracta Snapshot is pre-installed, which means that you can use it to create your own live installable Mageia 10 System with EXTON RMag as a template. I mean install EXTON RMag to hard drive in about five (5) minutes using Calamares, change everything to your liking and then create a new ISO in a few minutes. Start Refracta Snapshot from the menu. You do not even have to install EXTON RMag to hard drive before you can use the Refracta Snapshot. If you have plenty of RAM you can create a new (your own!) Mageia System while running EXTON RMag from a USB stick. Please note that the whole Refracta process (creating your new ISO) only will take 5 – 10 minutes! You will find the ISO in /home/snapshot. Or edit /etc/refractasnapshot.conf and decide where you want the created ISO to end up. The whole thing is very simple.
NOTE ALSO: You can only use Refracta Snapshot with “my” special kernel 7.2.8-amd64-exton. I.e. it won’t be possible if you use Mageia’s original kernel. Once you have installed EXTON RMag to hard drive you can (of course) switch to Mageia’s kernel 6.18.44-desktop-1.mga10 (as of 261015) if you like. But be sure to keep “my” kernel 7.2.8-amd64-exton if you want to use Refracta Snapshot. Also the links /vmlinuz and /initrd.img to said kernel.

ABOUT Mageia
"Mageia is an independent, community-driven Linux distribution that originated as a fork of Mandriva Linux in 2010. Known for its exceptional stability, user-friendliness, and robust control tools, Mageia provides a reliable and traditional Unix-like environment while keeping modern standards. It uses the RPM package management format and its own powerful backend toolset (urpmi and dnf), making it exceptionally well-suited for both desktop and server configurations. Mageia gives users full control over their hardware and system configuration without unnecessary complexity".

SCREENSHOTS
1. Refracta Snapshot is running: https://www.exton.se/rmag-261015/exton-rmag-running-refractasnapshot-261015.jpg
2. The first screen after login to Xfce4 as user or root: https://www.exton.se/rmag-261015/rmag-first-screen-261015.jpg
3. Calamares Installer has started: https://www.exton.se/rmag-261015/exton-rmag-calamares-started-261015.jpg
4. Calamares is ready: https://www.exton.se/rmag-261015/exton-rmag-calamares-ready-261015-2.jpg
5. Showing a Samba connection: https://www.exton.se/rmag-261015/rmag-samba-connection-261015.jpg
6. Running Mageia Control Center: https://www.exton.se/rmag-261015/rmag-controlcenter-261015.jpg

READ MORE: https://www.exton.se/exton-rmag-mageia/

ArchEX (Arch Linux) Live System with MATE 1.28.2-2 DE, Refracta Snapshot, Calamares 3.4.2 and kernel 7.2.9-arch1-1 :: Bu...
11/10/2026

ArchEX (Arch Linux) Live System with MATE 1.28.2-2 DE, Refracta Snapshot, Calamares 3.4.2 and kernel 7.2.9-arch1-1 :: Build 261010

ABOUT ArchEX Build 261010
I’ve made a new extra version of ArchEX with the MATE Desktop environment.

REPLACEMENT
This ArchEX version replaces several other previous versions.

MOST IMPORTANT: This ArchEX version has Refracta Snapshot pre-installed, which means that you can create your own Arch Linux System with ArchEX as a template. That is you can install ArchEX to hard drive (also in VMware or Qemu), change everything to your liking, fire up Refracta Snapshot and create a new ISO in about five (5) minutes. You’ll find your brand new ISO in /home/snapshot. You can change where you want your ISO to end up by editing /etc/refractasnapshot.conf. You can (for example) change to /mnt/sda5/work and /mnt/sda5/snapshot. That can be useful if you want to create a new ISO while running ArchEX Live. I.e. from a USB stick (using Ventoy). If you have plenty of RAM (32GB?) you can even boot up ArchEX in RAM and create a new ISO without changing /etc/refractasnapshot.conf.
NOTE: The folder work has to be on an EXT4 partition.

READ MORE: https://archex.exton.se

05/10/2026

ArchEX 2026.10 (Arch Linux) Live with KDE Plasma 6.7.5-1, Wayland, Refracta Snapshot and Calamares Installer 3.4.2 :: Build 261005

ABOUT ArchEX 2026.10 Build 261005
I’ve made a new extra version of ArchEX with KDE Plasma 6.7.5-1 – latest version released 260908. "Plasma is made to stay out of the way as it helps you get things done. But under its light and intuitive surface, it’s a powerhouse. So you’re free to choose ways of usage right as you need them and when you need them". This ArchEX version uses kernel 7.2.8-arch1-2. ArchEX can very easy be installed to hard drive (if you want) with Calamares Installer version 3.4.2 (latest). I’ve installed Calamares Installer from from the Yay repositories. It means that you can install ArchEX KDE in any language. Everything will then be in your chosen language when the installation has completed.

MOST IMPORTANT
This ArchEX version has Refracta Snapshot pre-installed, which means that you can create your own Arch Linux System with ArchEX as a template. That is you can install ArchEX to hard drive (also in VMware or Qemu), change everything to your liking, fire up Refracta Snapshot and create a new ISO in about five (5) minutes. You’ll find your brand new ISO in /home/snapshot. You can change where you want your ISO to end up by editing /etc/refractasnapshot.conf. You can (for example) change to /mnt/sda5/work and /mnt/sda5/snapshot. That can be useful if you want to create a new ISO while running ArchEX Live. I.e. from a USB stick (using Ventoy). If you have plenty of RAM (32GB?) you can even boot up ArchEX in RAM and create a new ISO without changing /etc/refractasnapshot.conf.
NOTE: The folder work has to be on an EXT4 partition.

Replacement
This ArchEX version replaces five other previous versions.

RUNS from RAM
ArchEX KDE can run LIVE from RAM. Super fast.

Study all installed packages in ArchEX 2026.10 with KDE Plasma 6.7.5-1: https://archex.exton.se/kde-261005/archex-kde-installed-packages-261005.txt

WHO should run Arch Linux?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch (for example) every month.

SCREENSHOTS
ArchEX Plasma Desktop for user: https://archex.exton.se/kde-261005/archex-kde-user-desktop-261005.jpg
Showing the Live boot screen: https://archex.exton.se/kde-261005/archex-kde-live-boot.jpg
ArchEX running Calamares Installer as user: https://archex.exton.se/kde-261005/archex-kde-calamares-ready-vmware-261005.jpg
Refracta Snapshot is ready: https://archex.exton.se/kde-261005/archex-root-refractasnapshot-ready-261005.jpg

READ MORE: https://archex.exton.se

ArchEX (Arch Linux) Build 261003 :: Run it, install it and create your own Arch Linux System in five (5) minutes!ABOUT A...
03/10/2026

ArchEX (Arch Linux) Build 261003 :: Run it, install it and create your own Arch Linux System in five (5) minutes!

ABOUT ArchEX LXQt Build 261003
I’ve made a new extra version of ArchEX with the LXQt 2.4 Desktop Environment. LXQt 2.4 was released 260420 LXQt is a lightweight Qt desktop environment. It will not get in your way. It will not hang or slow down your system. It is focused on being a classic desktop with a modern look and feel. I’ve also installed Calamares Installer from from the Yay repositories in ArchEX LXQt. It means that you can install ArchEX LXQt in any language. Everything will then be in your chosen language when the installation has completed.
MOST IMPORTANT: This ArchEX version has Refracta Snapshot pre-installed, which means that you can create your own Arch Linux System with ArchEX as a template. That is you can install ArchEX to hard drive (also in VMware or Qemu), change everything to your liking, fire up Refracta Snapshot and create a new ISO in about five (5) minutes. You’ll find your brand new ISO in /home/snapshot. You can change where you want your ISO to end up by editing /etc/refractasnapshot.conf. You can (for example) change to /mnt/sda5/work and /mnt/sda5/snapshot. That can be useful if you want to create a new ISO while running ArchEX Live. I.e. from a USB stick (using Ventoy). If you have plenty of RAM (32GB?) you can even boot up ArchEX in RAM and create a new ISO without changing /etc/refractasnapshot.conf.
NOTE: The folder work has to be on an EXT4 partition.

RUNS from RAM
ArchEX LXQt can run LIVE from RAM. Super fast.

WAYLAND
Some people think that using Wayland in a Linux System is very important. Wayland is said to be “the modern, simpler, more secure replacement for the aging X11 display server, offering better performance”. I have therefore installed Wayland with the command "sudo pacman -S lxqt-wayland-session labwc". You can choose between X11 and Wayland when you login to LXQt from LightDM. X11 is the default display server.

STUDY all installed packages in ArchEX LXQt: https://archex.exton.se/lxqt-261003/archex-lxqt-installed-packages-261003.txt

WHO should run Arch Linux?
My answer: The system fits the “advanced” Linux user/enthusiast, who would be willing to run an occasional command from time to time.

BENEFITS of ArchEX/Arch Linux
“Cutting Edge”-software and speed. You will for example always run the latest kernel if you upgrade ArchEX/Arch Linux (for example) every month.

UNIQUE?
As far as I know there is no other Linux System out there based on Arch Linux, which give you the opportunity to remaster the System and create a new ISO.

SCREENSHOTS
1. The LXQt Desktop for the ordinary user user: https://archex.exton.se/lxqt-261003/archex-user-desktop-261003.jpg
2. Calamares Installer is running: https://archex.exton.se/lxqt-261003/archex-calamares-ready-5min-vmware-261003.jpg
3. Running in Qemu: https://archex.exton.se/lxqt-261003/archex-calamares-qemu-261003.jpg
4. Running Netflix in Firefox: https://archex.exton.se/lxqt-261003/archex-user-desktop-netflix-261003.jpg
5. Running in VMware – Refracta Snapshot has started: https://archex.exton.se/lxqt-261003/archex-user-desktop-vmware-261003.jpg
6. Showing a Samba connection: https://archex.exton.se/lxqt-261003/archex-lxqt-samba-261003.jpg

READ MORE: https://archex.exton.se

Run latest Slackware 64 bit live and create your own live installable Slackware system with Refracta Snapshot! :: Build ...
30/09/2026

Run latest Slackware 64 bit live and create your own live installable Slackware system with Refracta Snapshot! :: Build 260929

ABOUT SlackEX 15.0 Current (testing/development) 64 bit Build 260929
Slackware is the first widely-used Linux system, which is still developing. Slackware has existed since 1993. In comparison with for example Ubuntu and Linux Mint, many people believe that Slackware is “difficult”. Any novice can quickly learn to use Ubuntu they say. My remaster of Slackware Current (15.0), which I call SlackEX 15.0 Current 64 bit Linux Live System, is however just as easy to use as Ubuntu and/or Linux Mint. Some tend to complain that the Program Management in Slackware is awkward. That was perhaps earlier the case, but not anymore.

NEWS ABOUT SlackEX BUILD 260929 with the Xfce 4.20.5 DESKTOP (DE)
A new version of SlackEX is ready. It is based on Slackware 15.0 Stable/Current released 220202 with Xfce4 as DE. The most important package installed is Refracta Snapshot. With that you can build your own Slackware 15.0 distribution. Xfce4 is one of Slackware’s official Desktop environments. The other one is KDE. Kernel 7.2.8-amd64-exton is used in this SlackEX Build. To be able to use Refracta Snapshot you’ll have to use said kernel. Otherwise you can (of course) replace “my” kernel with Slackware’s original kernel – see about that below. Study the list of upgraded packages.
NOTE1: You’ll run SlackEX Build 260929 as the normal user user or as root. The password for root is root. The password for user is live.
NOTE2: You can run SlackEX Build 260929 on UEFI and non-UEFI computers. You can also run SlackEX live super fast from RAM.
NOTE3: You can use the Refracta Snapshot (pre-installed) to create your own installable Slackware 15.0 Live System once you have installed SlackEX to hard drive. I mean change everything to your liking and then create a whole new Slackware/SlackEX ISO file.

WHY Slackware?
Slackware is grossly underestimated (in my opinion). This article give you ten (10) reasons to choose Slackware: https://www.techrepublic.com/article/10-reasons-why-you-should-give-slackware-linux-a-chance/

SCREENSHOTS
Screenshot 1 – user’s Desktop – Netflix running: https://slackex.exton.se/build-260929/slackex-running-netflix-as-user-260929.jpg
Screenshot 2 – root’s Desktop – Refracta Snapshot running: https://slackex.exton.se/build-260929/slackex-refractasnapshot-started-260929.jpg
Screenshot 3 – using Refracta Installer – keeping the user account: https://slackex.exton.se/build-260929/slackex-refracta-installer-keeping-user-260929.jpg
Screenshot 4 – using Refracta Installer – installing Grub in VMware: https://slackex.exton.se/build-260929/slackex-installing-in-vmware-grub-chroot-260929.jpg
Screenshot 5 – Running YouTube as root: https://slackex.exton.se/build-260929/slackex-running-youtube-as-root-260929.jpg
Screenshot 6 – Showing a Samba connection: https://slackex.exton.se/build-260929/slackex-samba-conn-260929.jpg

READ MORE: https://slackex.exton.se

25/09/2026

LFS EXTON systemd – a live installable Linux system built from Linux From Scratch (which can run on ALL computers) with LXQt 2.4.0 and kernel 7.2.5-amd64-exton ::: Build 260925

LFS EXTON Linux live System is built using Linux From Scratch 13.1 (LFS) and Beyond Linux From Scratch 13.1 (BLFS).

ABOUT Refracta Snapshot in BUILD 260925
Refracta Snapshot can be started from the menu. The config file is /etc/refractasnapshot.conf. There you can change where you want your ISO after the remaster process is ready. You can for example change from /root/snapshot to /mnt/sda3/snapshot and /root/work to /mnt/sda3/work. That can be useful if you want to use Refracta Snapshot while running LFS EXTON live from a USB stick. Change everything to your liking. Then just fire up Refracta Snapshot and wait a few minutes. Your new ISO will be ready in /root/snapshots. The whole thing is so simple that a 10 year old child can do it!

ABOUT Refracta Installer
I finally made Refracta Installer to work in LFS EXTON! Now you can install LFS EXTON to hard drive like any other Linux distribution. Just start Refracta Installer from the menu and follow the instructions.

BUILD your OWN LFA system
You can also just use LFS EXTON Live System as build environment when building your own Linux System From Scratch.

RUN IT FAST!
The system is really fast and responsive. You can run also LFS EXTON live super fast from RAM. When the boot process is ready you can eject the DVD or USB stick.

SCREENSHOTS
1. Refracta Snapshot has successfully created a new ISO file: https://www.exton.se/lfs-260925/lfs-exton-refractasnapshot-ready-260925.jpg
2. Showing a Samba connection: https://www.exton.se/lfs-260925/lfs-exton-samba-conn-260925.jpg
3. Running YouTube with good video and sound quality: https://www.exton.se/lfs-260925/lfs-exton-youtube-pavucontrol-260925.jpg
4. Installing Grub in VirtualBox: https://www.exton.se/lfs-260925/lfs-exton-refractainstaller-grub-install-vbox-260925.jpg
5. Refracta Snapshot has started: https://www.exton.se/lfs-260925/lfs-exton-refractasnapshot-start-260925.jpg
6. Netflix is running with excellent video quality: https://www.exton.se/lfs-260925/lfs-exton-netflix-running-quality-260925.jpg

READ MORE: https://www.exton.se/linux-from-scratch/

HOW TO install several Linux Systems on one SSD Disk and make it PORTABLEI have made an INSTRUCTION about it. If you fol...
14/09/2026

HOW TO install several Linux Systems on one SSD Disk and make it PORTABLE

I have made an INSTRUCTION about it. If you follow each step to the letter the whole thing is very simple. When everything is ready you can use your ssd disk on ANY computer.

READ my Instruction: https://www.exton.se/ssd-portable/

Adress

Stockholm

Aviseringar

Bli först med att veta: vi skickar ett mejl när EXTON Linux Systems publicerar nyheter och kampanjer. Din e-postadress används inte till något annat, och du kan avsluta prenumerationen när som helst.

Genvägar

Dela