ICOP Technology Taiwan

ICOP Technology Taiwan ICOP's vision is to be the most professional and advanced manufacturer for Single Board Computer in

🔧 EBOX-IMX8MM 系統需要還原嗎？當 Yocto Linux 系統發生異常，或需要將設備恢復至預設運作狀態時，可以透過 Windows 電腦搭配 NXP UUU 燒錄工具，快速將 Yocto Linux 5.0 映像檔重新寫入 E...
02/09/2026

🔧 EBOX-IMX8MM 系統需要還原嗎？

當 Yocto Linux 系統發生異常，或需要將設備恢復至預設運作狀態時，可以透過 Windows 電腦搭配 NXP UUU 燒錄工具，快速將 Yocto Linux 5.0 映像檔重新寫入 EBOX-IMX8MM 的內建 eMMC！💻

📌 本指南將帶您逐步完成：
🔹 下載 Yocto Linux 5.0 映像檔與 UUU 工具
🔹 設定 EBOX-IMX8MM 為 Serial Download Mode
🔹 透過 USB 連接 Windows 主機進行系統燒錄
🔹 完成還原並重新進入 Yocto Linux 5.0 系統

✨ 無論是系統還原或修復受損的作業系統，都能透過簡單步驟快速完成！

🔗 查看完整教學，讓您的 EBOX-IMX8MM 快速恢復正常運作！
🎬:https://www.youtube.com/shorts/M3CkdlHpXqc
📚:https://www.icop.com.tw/news/4398

#工業運算 #嵌入式運算

🔧 Need to restore your EBOX-IMX8MM system?

If your Yocto Linux system encounters an issue or needs to be restored to its default operating state, you can use a Windows PC and the NXP UUU flashing tool to quickly write the Yocto Linux 5.0 image back to the built-in eMMC of the EBOX-IMX8MM! 💻

📌 This step-by-step guide will walk you through:
🔹 Downloading the Yocto Linux 5.0 image and UUU tool
🔹 Setting the EBOX-IMX8MM to Serial Download Mode
🔹 Connecting to a Windows PC via USB and flashing the system
🔹 Completing the restoration and booting back into Yocto Linux 5.0

✨ Whether you need to restore the system or recover from a damaged OS installation, you can get your system back up and running in just a few simple steps!

🔗 Check out the full guide and get your EBOX-IMX8MM back to normal operation!

🎬: https://www.youtube.com/shorts/M3CkdlHpXqc
📚: https://www.icop.com.tw/news/4398

🤖 ROS 2 × EtherCAT，讓智慧機器人更快走進工業現場！懂 ROS 2／AI 的不一定熟悉 EtherCAT，熟悉工業自動化的也未必熟悉 MoveIt 2——智慧軟體與實體設備之間，如何真正串起來？ICOP 近期以 QEC Et...
26/08/2026

🤖 ROS 2 × EtherCAT，讓智慧機器人更快走進工業現場！

懂 ROS 2／AI 的不一定熟悉 EtherCAT，熟悉工業自動化的也未必熟悉 MoveIt 2——智慧軟體與實體設備之間，如何真正串起來？

ICOP 近期以 QEC EtherCAT 主站平台，完成 ROS 2 × MoveIt 2 控制東方馬達 SCARA 的實機驗證，串接 ros2_control、micro-ROS、EtherCAT 與 CiA402，並進一步完成 Pick & Place 任務。

從運動規劃、AI／視覺應用，到多軸即時控制與設備獨立運行，探索一套更貼近實際設備導入的 ROS 2 × EtherCAT 開發架構。

🚀 讓 ROS 2 的智慧，真正連接到 EtherCAT 的即時控制。

想了解完整架構與開發流程，歡迎閱讀文章👇
https://www.icop.com.tw/news/4404

#工業自動化 #智慧製造

🤖 ROS 2 × EtherCAT: Connecting Intelligent Robotics to Industrial Automation

ICOP recently validated ROS 2 × MoveIt 2 control of an Oriental Motor SCARA robot using the QEC EtherCAT MDevice, integrating ros2_control, micro-ROS, EtherCAT, and CiA402 for real-time motion control and Pick & Place tasks.

🚀 Bringing ROS 2 intelligence and EtherCAT real-time control together.

Learn more about the architecture and development workflow 👇
https://www.icop.com.tw/news/4406

20/08/2026

🚀 ICOP × Automation Taipei 2026｜展場直擊！

從精準定位到高速運動，帶你近距離看看 SCARA 的實機運作！

📍 東方馬達 Co-booth｜1館4樓 N414

除了 SCARA 實機展示，也歡迎來到 ICOP 攤位 K1202，探索更多工業電腦與自動化解決方案：

🔹 Embedded Board / SBC
🔹 Industrial Panel PC / PPC
🔹 Embedded Box PC / EBOX
🔹 QEC EtherCAT Solutions

📍 ICOP｜南港展覽館 1館1樓 K1202

🤖 Taiwan Robotics 開發者年會也將於展期登場！

📅 08/22（六）｜10:00–17:00
📍 1館5樓｜504A 會議室

展期還有兩天，歡迎來 K1202 找 ICOP，現場體驗最新工業自動化技術！

#台北國際自動化工業大展 #工業自動化 #智慧製造

🚀 ICOP × Automation Taipei 2026｜Live from the Show!

From precision positioning to high-speed motion, get a closer look at SCARA in action and see how it brings automation to life!

📍 Oriental Motor Co-booth｜Hall 1, 4F N414

Beyond the SCARA demonstration, visit ICOP Booth K1202 to explore our industrial computing and automation solutions:

🔹 Embedded Board / SBC
🔹 Industrial Panel PC / PPC
🔹 Embedded Box PC / EBOX
🔹 QEC EtherCAT Solutions

📍 ICOP｜Hall 1, 1F K1202

🤖 Taiwan Robotics Developers Conference is also happening during the exhibition!

📅 Aug. 22 (Sat.)｜10:00–17:00
📍 Hall 1, 5F｜Room 504A

There are still two days to go! Come visit ICOP at K1202 and experience the latest in industrial automation technology firsthand.

🚀 2026 台北國際自動化工業大展｜Day 1 開展！今天，ICOP 正式於 台北國際自動化工業大展 與大家見面！今年帶來最新的 工業電腦、嵌入式運算與 EtherCAT 解決方案，現場同步展示實機與實際應用，歡迎來到展場，近距離探索智慧...
19/08/2026

🚀 2026 台北國際自動化工業大展｜Day 1 開展！

今天，ICOP 正式於 台北國際自動化工業大展 與大家見面！

今年帶來最新的 工業電腦、嵌入式運算與 EtherCAT 解決方案，現場同步展示實機與實際應用，歡迎來到展場，近距離探索智慧製造與工業自動化的更多可能！✨

🔥 明日重點活動｜新產品・新技術發表會

ICOP 將於明天分享最新產品與技術應用，帶你掌握工業自動化與嵌入式運算的最新趨勢！

📅 08/20（四）
⏰ 12:00–12:15
📍 南港展覽館 2 館 1 樓｜Booth Q1024
歡迎蒞臨現場，與 ICOP 一起交流最新技術、探索智慧製造新應用！🤖

📍 展覽資訊
📅 08/19（三）– 08/22（六）

🔹 ICOP Booth｜K1202 南港展覽館 1 館 1 樓
🔹 東方馬達 Co-booth｜N414 南港展覽館 1 館 4 樓
🔹 08/22（六）｜Taiwan Robotics 開發者年會
　⏰ 10:00–17:00

📣 展期還有 3 天，歡迎來找 ICOP！

從工業電腦、嵌入式運算到 EtherCAT 解決方案，
一起探索 ICOP 如何以核心技術驅動下一代智慧製造與工業自動化！

#台北自動化 #台北自動化展 #工業自動化 #智慧製造 #工業電腦 #嵌入式運算

🚀 2026 Taipei Automation｜Day 1 Is Underway!

Today, ICOP is excited to officially meet you at the 2026 Taipei Automation !
This year, we’re showcasing our latest industrial computers, embedded computing solutions, and EtherCAT solutions, along with live demonstrations and real-world applications. Stop by and experience firsthand how innovative technologies are shaping the future of smart manufacturing and industrial automation! ✨

🔥 Tomorrow’s Highlight｜New Product & Technology Presentation
Join ICOP tomorrow as we introduce our latest products and technology applications, and explore the newest trends in industrial automation and embedded computing!
📅 August 20 (Thu.)
⏰ 12:00–12:15 PM
📍 TaiNEX 2, 1F｜Booth Q1024

📍 Show Information
📅 August 19 (Wed.)–August 22 (Sat.)
🔹 ICOP Booth｜K1202 TaiNEX 1, 1F
🔹 Oriental Motor Co-booth｜N414 TaiNEX 1, 4F
🔹 August 22 (Sat.)｜Taiwan Robotics Developers Conference
　⏰ 10:00 AM–5:00 PM

📣 There are still 3 days to go—come visit ICOP!
From industrial computers and embedded computing to EtherCAT solutions, discover how ICOP’s core technologies are helping drive the next generation of smart manufacturing and industrial automation!

2026 台北國際自動化工業大展即將開幕！🚀今年，ICOP 將帶來最新的工業電腦、嵌入式運算與 EtherCAT 解決方案，現場更有實機展示與應用體驗，歡迎蒞臨現場，探索智慧製造與工業自動化的更多可能！📍 展覽資訊📅 08/19（三）– 0...
12/08/2026

2026 台北國際自動化工業大展即將開幕！🚀

今年，ICOP 將帶來最新的工業電腦、嵌入式運算與 EtherCAT 解決方案，現場更有實機展示與應用體驗，歡迎蒞臨現場，探索智慧製造與工業自動化的更多可能！

📍 展覽資訊
📅 08/19（三）– 08/22（六）
📍 南港展覽館 1 館 1 樓
📌 Booth K1202

✨ 展期活動
🔹 08/20（四）｜新產品新技術發表會｜12:00–12:15
🔹 08/22（六）｜Taiwan Robotics 開發者年會｜10:00–17:00
🔹 東方馬達 Co-booth｜現場交流更多自動化應用

誠摯邀請您蒞臨 ICOP 攤位 K1202，與我們一起探索新一代工業自動化技術！

#台北國際自動化工業大展 #智慧製造 #工業自動化

🚀 2026 Taipei Automation Exhibition is Coming Soon!

This year, ICOP will showcase our latest industrial computers, embedded computing solutions, and EtherCAT solutions, featuring hands-on demos and real-world applications. Visit us to discover new possibilities for smart manufacturing and industrial automation!

📍 Exhibition Information
📅 Aug. 19–22, 2026
📍 TaiNEX 1, 1F
📌 Booth K1202

✨ Events During the Exhibition
🔹 Aug. 20 (Thu.)｜2026 New Product & Technology Launch｜12:00–12:15
🔹 Aug. 22 (Sat.) ｜Taiwan Robotics Developers Conference｜10:00–17:00
🔹 Oriental Motor Co-booth｜Discover more automation applications through on-site collaboration

We sincerely invite you to visit ICOP at Booth K1202 and explore the next generation of industrial automation with us!

📢 2026 台北國際自動化工業大展，我們在 K1202 等您！昭營科技（ICOP）將於展會現場展示最新的工業自動化與嵌入式運算解決方案，歡迎蒞臨攤位交流。展出亮點：🔹 嵌入式單板電腦（SBC）🔹 工業級觸控電腦（PPC）🔹 嵌入式工控電腦...
05/08/2026

📢 2026 台北國際自動化工業大展，我們在 K1202 等您！

昭營科技（ICOP）將於展會現場展示最新的工業自動化與嵌入式運算解決方案，歡迎蒞臨攤位交流。

展出亮點：
🔹 嵌入式單板電腦（SBC）
🔹 工業級觸控電腦（PPC）
🔹 嵌入式工控電腦（EBOX）
🔹 QEC EtherCAT 自動化解決方案

📍 台北南港展覽館 一館 1F｜K1202
📆 08/19–08/21｜10:00–17:00
📆 08/22｜10:00–16:00

期待與您現場交流，一起探索更高效的工業自動化解決方案！
🔗 https://www.icop.com.tw/news/4380
#工業自動化 #工業電腦 #嵌入式系統 #智慧製造 #邊緣運算

📢 Join ICOP at Taipei Automation 2026 – Visit Us at Booth K1202!

ICOP will showcase its latest industrial automation and embedded computing solutions at Taipei Automation 2026. We invite you to visit our booth and explore how our technologies can support your next automation project.

Featured Solutions:
🔹Embedded Board (SBC)
🔹Industrial Panel PC (PPC)
🔹Box PC (EBOX)
🔹 QEC EtherCAT Solutions

📍 Taipei Nangang Exhibition Center, Hall 1 | Booth K1202
📅 Aug. 19–21, 2026 | 10:00–17:00
📅 Aug. 22, 2026 | 10:00–16:00

We look forward to meeting you at Booth K1202 and discussing how ICOP can help accelerate your industrial automation applications.

🔗https://www.icop.com.tw/news/4382

29/07/2026

🚀 真正的工業級效能，不需要龐大的機身。

在有限的設備空間中，您需要的不只是小尺寸，更需要一台能長時間穩定運作的工業電腦。

EBOX-IMX8MM 採用僅 115 × 115 mm 的超精巧無風扇設計，搭載 NXP i.MX8M Mini Quad Cortex-A53 處理器，在嚴苛環境下依然維持穩定運算表現，為工業自動化、智慧設備與邊緣運算應用提供高可靠性的嵌入式解決方案。

🔹 小型化設計，靈活部署於有限空間
🔹 寬溫與寬電壓設計，適應多元工業環境
🔹 豐富 I/O 連接，滿足不同應用需求

產品特色：
✔️ -40°C ～ +80°C 寬溫運作
✔️ 12V～36V DC 寬電壓輸入
✔️ 雙 GbE LAN、Wi-Fi、Bluetooth、雙 COM
✔️ 最高支援 4GB LPDDR4 / 64GB eMMC
✔️ 支援 Android 與 Yocto Linux

📹 探索 EBOX-IMX8MM 如何以小巧機身，打造可靠且高效的工業運算平台。

🔗 https://www.icop.com.tw/product/EBOX-IMX8MM
🔗 https://www.icop.com.tw/news/1194

#工業電腦 #嵌入式系統 #邊緣運算 #工業自動化 #無風扇電腦


🚀 Industrial-grade performance without a bulky footprint.

When space is limited, you need more than just a compact design — you need an industrial computer that can deliver reliable operation over the long term.

The EBOX-IMX8MM features an ultra-compact 115 × 115 mm fanless design powered by the NXP i.MX8M Mini Quad Cortex-A53 processor. Built to maintain stable performance even in harsh environments, it provides a highly reliable embedded computing solution for industrial automation, smart devices, and edge computing applications.

🔹 Compact design for flexible deployment in space-constrained environments
🔹 Wide temperature and wide voltage support for diverse industrial conditions
🔹 Rich I/O connectivity to meet various application requirements

Key Features:
✔️ Wide operating temperature range: -40°C to +80°C
✔️ 12V–36V DC wide-range power input
✔️ Dual GbE LAN, Wi-Fi, Bluetooth, and Dual COM
✔️ Up to 4GB LPDDR4 / 64GB eMMC support
✔️ Supports Android and Yocto Linux

📹 Discover how the EBOX-IMX8MM delivers reliable and efficient industrial computing in a compact form factor.

🔗 https://www.icop.com.tw/product/EBOX-IMX8MM
🔗 https://www.icop.com.tw/news/1194

22/07/2026

🛡️ 為極端環境而生的工業級嵌入式平台

面對石油勘探、海事、航空與工業自動化等嚴苛環境，ICE-104 採用輕量化鋁合金機箱與無風扇設計，提供可靠的系統防護與靈活的擴充能力。

✔ IP65 / IP67 防護等級，防水、防塵、防震與抗腐蝕
✔ -60°C 至 +80°C 寬溫運行，可選配 -100°C 低溫版本
✔ 支援 PC/104 模組堆疊 與 3.5 吋主板擴展
✔ 提供客製化 I/O 面板與企業 Logo 雷雕

適用於船載系統、油田設備、航空、軍工平台與戶外邊緣運算等應用，ICE-104 能在高衝擊、高震動與極端氣候環境下，為嵌入式系統提供穩定可靠的運作基礎。

📖 了解更多 ICE-104：
https://www.icop.com.tw/news/259
https://www.youtube.com/shorts/43_ure13fCE

#嵌入式系統 #工業運算 #邊緣運算 #工業自動化 #堅固型運算

🛡️ Built for Extreme Environments

Designed for demanding applications in oil exploration, marine, aerospace, and industrial automation, the ICE-104 features a lightweight aluminum chassis and fanless design to provide reliable protection and flexible expansion for embedded systems.

✔ IP65 / IP67 protection, with resistance to water, dust, shock, and corrosion
✔ -60°C to +80°C wide-temperature operation, with an optional -100°C low-temperature version
✔ Supports PC/104 module stacking and 3.5-inch SBC expansion
✔ Custom I/O panels and company logo engraving

From shipboard systems and oilfield equipment to aerospace, defense platforms, and outdoor edge computing, the ICE-104 provides a stable and reliable foundation for embedded systems operating in high-impact, high-vibration, and extreme weather conditions.

📖 Learn more about the ICE-104:
https://www.icop.com.tw/news/259
https://www.youtube.com/shorts/43_ure13fCE

💡 QEC-PPC-M-090T-S：為智慧設備打造的一體化 HMI 控制平台ICOP 推出 QEC-PPC-M-090T-S，整合 9 吋觸控 HMI、嵌入式 x86 控制器、雙乙太網路、內建儲存裝置 與 86Duino 開發環境，協助設...
15/07/2026

💡 QEC-PPC-M-090T-S：為智慧設備打造的一體化 HMI 控制平台

ICOP 推出 QEC-PPC-M-090T-S，整合 9 吋觸控 HMI、嵌入式 x86 控制器、雙乙太網路、內建儲存裝置 與 86Duino 開發環境，協助設備製造商簡化系統架構。

✔ HMI 操作介面
✔ 控制邏輯執行
✔ Modbus TCP / MQTT / Web Server 通訊
✔ 資料記錄與系統整合
✔ 雙網路（設備端 / 工廠端）分離管理

相較於傳統需分別配置 HMI、控制器、Gateway 與 Data Logger 的架構，QEC-PPC-M-090T-S 可在單一平台上完成設備操作、通訊與資料整合，減少系統元件數量並加速開發。

搭配 86Duino IDE、LVGL 與 86HMI Editor，工程師可使用 C/C++ 快速建立客製化 HMI 與控制應用，特別適合小型設備、測試設備、邊緣資料整合與智慧自動化系統。

📖 了解更多：https://www.icop.com.tw/news/4368
#工業自動化

💡 QEC-PPC-M-090T-S: An All-in-One HMI Control Platform for Smart Machines

ICOP introduces the QEC-PPC-M-090T-S, integrating a 9-inch touch HMI, embedded x86 controller, dual Ethernet ports, onboard storage, and the 86Duino development environment into a single platform to help machine builders simplify system architecture.

✔ HMI operation and monitoring
✔ Control logic processing
✔ Modbus TCP, MQTT, and Web Server communication
✔ Data logging and system integration
✔ Dual-network management for machine-side and factory-side communication

Compared with traditional architectures that require separate HMI panels, controllers, gateways, and data loggers, the QEC-PPC-M-090T-S combines machine operation, communication, and data integration in a single platform, reducing system complexity and accelerating development.

With 86Duino IDE, LVGL, and 86HMI Editor, engineers can rapidly build custom HMI and control applications using C/C++, making it ideal for compact machines, test equipment, edge data integration, and smart automation systems.

📖 Learn more: https://www.icop.com.tw/news/4370

💡 讓 EtherCAT 應用開發，比你想像中更簡單QEC 將 EtherCAT 設定、HMI 設計與控制邏輯整合成更直覺的開發流程。✔ 使用 86EVA 完成 EtherCAT 裝置設定✔ 使用 86HMI Editor 快速建立 HMI...
08/07/2026

💡 讓 EtherCAT 應用開發，比你想像中更簡單

QEC 將 EtherCAT 設定、HMI 設計與控制邏輯整合成更直覺的開發流程。

✔ 使用 86EVA 完成 EtherCAT 裝置設定
✔ 使用 86HMI Editor 快速建立 HMI 畫面
✔ 使用 ArduBlock 拖拉積木完成控制邏輯

透過這套軟硬體整合平台，即使是步進馬達控制這類應用，也能更快速完成開發與驗證，減少繁瑣的程式撰寫與工具整合時間。

本篇文章將以 Stepper Motor Control 範例，帶您一步步了解 QEC 如何簡化 EtherCAT 應用開發，協助您更快將想法變成可運作的控制系統。

📖 點擊閱讀完整文章，體驗更高效率的開發流程。
https://www.icop.com.tw/news/4350

#運動控制 #工業自動化

💡 Simplify EtherCAT Application Development with QEC

QEC integrates EtherCAT configuration, HMI design, and control logic into one intuitive development platform, making industrial automation projects faster and easier to build.

✔ Configure EtherCAT devices with 86EVA

✔ Design HMI interfaces using 86HMI Editor

✔ Create control logic with ArduBlock's drag-and-drop programming

With this integrated hardware and software platform, even applications such as stepper motor control can be developed and validated more efficiently, reducing programming complexity and minimizing time spent integrating multiple development tools.

In this article, we use a Stepper Motor Control example to demonstrate how QEC streamlines EtherCAT application development, helping you turn ideas into fully functional control systems more quickly.

📖 Discover a more efficient way to develop EtherCAT applications:
https://www.icop.com.tw/news/4352

Address

No. 15, Wugong 5th Road , Xinzhuang Dist. , New Taipei City
Taipei
248020

Opening Hours

Monday 08:30 - 17:30
Tuesday 08:30 - 17:30
Wednesday 08:30 - 17:30
Thursday 08:30 - 17:30
Friday 08:30 - 17:30

Website

,

Alerts

Be the first to know and let us send you an email when ICOP Technology Taiwan posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category