ATMegaZero

09/06/2021

🚨New Video! - check it out here 👉🏻

What’s up everyone, this is Eddie from 4hackrr, and today I’m going to show you how to get started with the new ATMegaZero ESP32-S2 using CircuitPython. I’ll...

05/27/2021

🎉 I’m excited to announce the new member of the family! - The Ultimate Uninterruptible Power Supply (UPS) Shield 🔥. With support for a solar panel from 7-40V.

05/23/2021

😱 Amazing home automation stack 😳. ATMegaZero Relay Shield, ATMegaZero ESP32-S2, ATMegaZero Sensors Shield, Zero W & the ATMegaZero Learning Shield.

05/21/2021

🔥ATMegaZero Sensors Shield.

On the analog side we have an LDR and NTC connected to ADS1115, and two additional analog inputs from the ADS1115(0-5V) connected to the screw terminal.
- 🔸Real Time Clock (RTC) based on DS1307
- 🔹BME280 digital humidity, barometric pressure and ambient temperature sensor
- ▪️MPU6050 six-axis Gyro and accelerometer 
- ▫️SGP40 VOC sensor - for indoor air quality and volatile organic compounds

05/17/2021

ATMEGAZERO ESP32-S2 (COMING SOON). The ATMegaZero comes with an onboard microSD card holder and a 30-pin OLED display port. 👉🏻 pre-order yours today! Link in bio 👈🏻

05/16/2021

Can you really do this? Absolutely yes!, the new ATMegaZero ESP32-S2 runs at 3.3v similar to the Raspberry Pi Zero and they both have the same pinout arrangement. You can use them independent or communicate via i2c. Or make them talk to each other via MQTT making the rpi the MQTT broker using mosquitoMQTT. Just get creative if you need to combine both of these boards.

05/16/2021

25 days remaining, 75 units to go before we are fully funded and ready for production!. Support us here 👉🏻 Link In Bio 👌🏻

05/16/2021

Pre-order yours today! - You can support this project by visiting the link in the bio, or by visiting groupgets.com.

05/16/2021

SIDE BY SIDE
The ATMegaZero was modeled after the Raspberry PI Zero to take advantage of its sleek design and form factor but in the form of a microcontroller board.

05/15/2021

The new ATMegaZero ESP32-S2 comes with 64Mbit (8MB) extra PSRAM & 256Mbit (32MB) SPI Flash but we can only use 16MB at the moment due to firmware limitations.

05/15/2021

ATMegaZero Relay Shield - coming soon

05/14/2021

ATMegaZero ESP32-S2 with 32-bit 240 MHz single-core processor. Equipped with an integrated 802.11 b/g/n WiFi 2.4GHz (up to 150Mbps)