What are the opening hours?

Monday 8am - 5pm Tuesday 8am - 5pm Wednesday 8am - 5pm Thursday 8am - 5pm Friday 8am - 5pm

CS Instruments USA

Home
United States
Bluffton, SC
CS Instruments USA

Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from CS Instruments USA, Information Technology Company, 110 Traders Cross, Bluffton, SC.

10/28/2026

Fixed the leak? Good. Now make sure it stays fixed.
Daily use wears down fittings and hoses, and air starts escaping again. 💨
The LeakCam 600 scans large areas at a glance, shows every leak point on screen and documents it, so you can compare at your next inspection.
Inspect, repair, inspect again. 🔎
When was your last inspection? DM us.

10/26/2026

Your dew point sensor just flagged a drift. Now what?
A sensor tells you what's happening. A recorder puts it next to your flow, pressure, oil and cost, so one reading becomes a decision.
The FA 510 reads dew point continuously. The DS 500 records it alongside your other measurements and shows your cost per m³ of compressed air.
Measure. Understand. Decide. 😉

Want to see how the combo works? DM us.

10/15/2026

Walk into a compressor room and count the screens. Flow on one meter, dew point on another, oil somewhere else, pressure on a gauge. Cost per cubic metre? Nobody knows.
That's not monitoring a plant. That's chasing it.
The DS 500 puts it all on one screen.
How many screens is yours? Drop your number below.

10/14/2026

That air-pressure reading you "more or less" know? It's usually where the money leaks.
The DS 500 shows dew point, consumption and pressure together on one screen, so problems show up before they stop your plant.
Our team in the US supports you from setup to calibration.

→ Let's talk about your plant. Message us! 🤩

10/12/2026

How much compressed air did your plant use yesterday? If the answer is a guess, leaks, pressure drops and clogged filters are probably hiding in it.

The DS 500 puts flow, consumption, pressure, dew point and residual oil on one screen, with up to 12 sensors and real-time data. When something changes, you see it the same day, before it reaches production.

Not sure what to measure first? DM us and we'll help you decide.

10/06/2026

The problem isn't the myth. It's that none of it is visible until you measure it.

Our team helps you choose, install and calibrate the right instrument, so you decide with data, not hunches. OIL CHECK 500: continuous residual oil monitoring, so you know where you stand against ISO 8573-1.

Save this post and send it to your maintenance lead. 👇
Stop guessing. Start measuring.

10/05/2026

More pressure doesn’t always mean more performance.

When compressed air doesn’t reach the point of use, increasing compressor pressure can seem like the obvious solution. But if the real problem is a leak, restriction or pressure drop in the system, you may simply be increasing your energy consumption without solving the root cause.

Higher pressure can mean higher costs — and it can make existing leaks even more expensive.

Before turning up the pressure, ask yourself: where is the air actually being lost?

The first step is not producing more air. It’s measuring what’s happening across the system.

💨 Want to find out where your compressed air is being lost? Talk to CS INSTRUMENTS and start measuring what’s really happening in your system.

👉 Get in touch with CS INSTRUMENTS to identify leaks, pressure losses and efficiency opportunities in your compressed air system: https://q6hia.share.hsforms.com/2ZJn9Y23bTIi8Adhcg3B6uQ

10/01/2026

You pay for two compressors. Only one works.
The other one feeds leaks you can't hear, pressure you never needed and air doing a fan's job. None of it shows on the gauge.
Measuring is what makes it visible, and it's the first step to getting that air back. We'll help you find out which half you're losing.
Message us and let's look at your system together. 👇

09/30/2026

One thing I’ve learned from working with industrial plants is that compressed air waste is not always obvious. 👀
A system can be running, production can be on schedule, and everything can look normal on the surface. But there may still be air being lost through leaks, pressure being higher than necessary, or compressed air being used where another solution could do the job.
The difficult part is that you can’t fix what you can’t see.
Before looking for solutions, the first step is understanding what is actually happening in the system. 📊
Where is your compressed air really going?

Address

110 Traders Cross
Bluffton, SC
29909

Opening Hours

Monday	8am - 5pm
Tuesday	8am - 5pm
Wednesday	8am - 5pm
Thursday	8am - 5pm
Friday	8am - 5pm

Website

http://cs-instruments.com/us

Alerts

Be the first to know and let us send you an email when CS Instruments USA posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.