Stealth Audio Cables

Name: Stealth Audio Cables
Address: Derwood, MD, 20855, US
Telephone: +12407513003

Home
United States
Derwood, MD
Stealth Audio Cables

Stealth Audio Cables
Since 1999
Looking for dealers and distributors! Founder and Chief Audio Engineer

Our Distributors:

Poland

Portugal and Spain .pt

Hong Kong And China

Italy & Slovania:

Hungary: .AV

Netherlands and Holland:

Vietnam: https://www.facebook.com/Ng%E1%BB%8Dc-%C3%81nh-Audio-1607954655983061

10/24/2026

Please check out Our products Stealth Audio Cables presented by Audio Fast Audiofast SoundRebels

At:

PGE National Stadium:

Studio TV2
SkyBox 203
SkyBox 206

The Dream Royale V.19 will be featured which just had a review come out on it:

https://soundrebels.com/stealth-audio-dream-royale-v-19/

audiofast cable audiocable stealthaudiocables audiophile

07/27/2026

OCTAVA Varidig (abbr. from VARIable DIGital) is our exclusive (patent pending) technology. Varidig is different from any other digital cable on the market because its porous Teflon® dielectric is thicker in the middle of the cable than it is at the ends. The picture below shows geometry of the inside wire assembly of the AES/EBU Varidig, which explains the concept and the technology: please note as the wires become smaller in diameter as they approach the end (the termination point); the twisting pitch also varies along the cable - which is a great help in reducing cable’ internal resonances.

This specialized dielectric geometry eliminates impedance mismatch at the critical points (where the connectors are attached to the cable, i.e. between the inherently low-impedance RCA connectors, or still far from 110 Ohms XLRs, and the cable itself) which allows to achieve the correct characteristic impedance of the ENTIRE cable, including the connectors (75 Ohms for the S/PDIF version, and 110 Ohms for the AES/EBU) and thus greatly reduce signal reflections in the cable. This Varidig technology works equally well with S/PDIF and AES/EBU configurations.

06/18/2026

Please check out the latest video featuring STEALTH Audio Cables - Serguei Timachev

https://youtu.be/YPT-cdO6x6M

06/06/2026

please come see the MBL room at the High End Vienna Show 2026. Level: -2, room G2. It is an honor to have our products showcased with the MBL Extreme this year for the show.

06/05/2026

MBL Germany We are honored to have an opportunity to work together on the MBL extreme system here in Vienna Austria for the Vienna High End Show 2026 in Room
G2, Level -2. The System features the newest N41 Network Player going directly into the 9008 and 9011 amplifiers. From STEALTH Audio Cables - a full array. The cabling: Loudspeakers cables: Dream Royale V.26 and Dream Royale V.19. Power Cables: Dream 20-20s and one Dream Uni Cloude for the network player. Interconnects: Sakra Gold. Our flagship models that desired to be played with the MBL EXTREMEs.

04/12/2026

Please check out our room at AXPONA 2026 - Kyomi Audio our exclusive dealer in the Chicago, Illinois area.

04/04/2026

SAKRA V.16:

The Śakra V16 is quite different from the standard (original Sakra or the Sakra V.12): the cables are indeed directional – since they are CONICAL inside and outside, and feature our new “vari-cross” geometry – the cross-section of the cable varies along their length; this is done to improve the impedance matching between the source and the receiving end;

Sonically, the cables are more relaxed right out of the box, and sound yet more full-bodied (and thus natural) while having improved resolution and transparency over the “original” Sakra.

Because of the improved geometry the Śakra V16 is more relaxed and natural (right out of the box, in a brand new condition the V16 sounds more “broken in” – compare to the original Sakra with 1000+ hours on it). On top of that, the Sakra V16 has improved resolution and transparency over the “original” Sakra.

In other words, the Śakra V16 is simply a better cable and is one of our flagship analog interconnect for 2026.

KEY DESIGN FEATURES

• Amorphous conductive media (wire) - which is perfectly homogeneous, grain-less – i.e. identical in all directions, since it has no crystal structure at all;

• Ultra thin wire: 0.001” (one-thousands of an inch) thick. Very thin wire is important for:

◦ minimizing skin effect (no harshness in the upper midrange and treble);

◦ Proprietary non-resonant cable geometry: STEALTH vari-cross distributed LITZ**:

◦ Individually insulated strands (to eliminate direct electrical contact, i.e. galvanic interaction between strands – otherwise the multiple bare strands behave like a single thicker wire)

Using solid silver RCAs. Full made in the USA.

Exclusive distributor in Vietnam.

04/03/2026

Dream Petite V.16:

The Dream Petite V16 loudspeaker cables is a smaller (3/4 size) version of our are our DREAM V18 speaker cables (relative sizes are show below: the Dream V18 with spade lugs is in the middle, and the Dream Petite V16 with banana plugs are left and right). It took over two years to develop the full Dream speaker cables, and then over a year to have the Dream Petite. Many prototypes have been made, and we listened to them extensively, but none of the earlier prototypes made it into beta testing - because none of them sounded sufficiently better than the Hybrid MLT...

As well as the full Dream, this one does.
There are two versions of the Dream Petite V16 loudspeaker cables: the standard V16, and the user-tunable V16-T. The ONLY difference between the two is the tuning collar*** on the V16-T version.

The Dream Petite V16 stereo set consists of two round cables - which are 31.75 mm (1 and 1/4 inch) in diameter. The cables split at the ends into positive and negative runs.

* The outer layer of the Dream Petite V16 cable is made of 12 wire assemblies and 4 spacers (dividers);
* Each wire assembly is approximately 6 mm (a bit smaller than 1/4 inch) in diameter, made of 8 individually insulated solid core wires in our proprietary non-resonant distributed LITZ configuration; two different thicknesses (gauges) of 99.99% pure solid core copper, and two different gauges of 99.997% pure solid core silver are used - per each wire assembly.
* The wire assemblies are wrapped around a hollow, flexible para-vacuum* center multi-core (flexible Helium-filled tubing).
* Three wire assemblies being run side-by-side create wire bundles (triple runs). Therefore, there are two wire bundles (triple runs) in each Dream Petite cable.
* The two wire bundles (triple runs) are separated by two soft (foam) Teflon dividing runs (spacers).
* The spacers have the same diameter as the wire assemblies, i.e. 6 mm (roughly 1/4 inch).
* Using dividers dramatically reduces the overall cable capacitance and thus assures stability (non-oscillation) of any amplifier.
Exclusively available at

Address

Derwood, MD
20855

Telephone

+12407513003

Website

http://www.stealthaudiocables.com/

Alerts

Be the first to know and let us send you an email when Stealth Audio Cables posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Stealth Audio Cables:

Want your business to be the top-listed computer & electronics service in Derwood?