Pinnacle Autosound

Pinnacle Autosound Mobile Electronics

I spent the weekend engraving 150 tumblers for an upcoming conference that the Florida Sherrifs Youth Ranches is hosting...
08/31/2026

I spent the weekend engraving 150 tumblers for an upcoming conference that the Florida Sherrifs Youth Ranches is hosting at the for CORE. is a group that advocates for organizations like the Youth Ranch, providing legislative and developmental support. I know first hand the positive impact the@flsheriffsyr has on kids in our state so I am happy to partner with them. -JOey

We got the gadgets!!!!!
07/29/2026

We got the gadgets!!!!!

We just added a set of JL Audio M6 tower speakers to this Blazer Bay. While we had the boat we gave it a fresh tune usi...
07/17/2026

We just added a set of JL Audio M6 tower speakers to this Blazer Bay. While we had the boat we gave it a fresh tune using our MAX tuning rig. It sounds great and is ready to hit the water!
🔊

It’s a big one! This Eliminator is back for some more interior enhancements. We might even post pictures of what we do...
05/18/2026

It’s a big one! This Eliminator is back for some more interior enhancements. We might even post pictures of what we do and have done in the past for this one.

Another classic! This Cutlass come to us for some audio upgrades. The client had some gear from a previous installatio...
05/15/2026

Another classic! This Cutlass come to us for some audio upgrades. The client had some gear from a previous installation and needed a few more pieces to complete the system.
For this radio install we laser cut a piece of leather textured plastic, glued it to a piece of 1/8 acrylic for strength and painted it matte black to match the dash.
The next challenge was adding speakers to the dash. We used the factory top bracket, and cut an acrylic spacer for the top as well as the speakers. The prices and speakers were then bolted together with stainless steel hardware. Finally we fabricated a metal bottom bracket to hold the speaker assembly up in the dash.
We also added some JL Audio speakers in the kick panels and a JL Audio subwoofer in the trunk, along with two JL Audio amplifiers.
The result was a great-sounding audio system that will sound good even while cruising with the top down.

This was one of the more complicated enclosures we have had to build lately! The client wanted a 4th order band pass en...
05/02/2026

This was one of the more complicated enclosures we have had to build lately! The client wanted a 4th order band pass enclosure for the back of his RZR for a single Rockford Fosgate T1 12” subwoofer. It took a while to calculate an enclosure that would play a wide range of frequency, and also maximize output, while fitting in the small available space.
Once the planning was done we started construction. The enclosure was fabricated with 3/4” Marine-Grade plywood. When the enclosure was assembled we then added on additional cladding pieces to give it a more interesting shape, that complimented the design of the RZR. The final steps were filling and sanding, spraying with a high-build poly primer, sanding again, and then a thick coat of 2-part urethane bedliner spray.
We topped it off with an accent piece on the back with a vinyl decal we printed in-house and applied to an acrylic plate.
The enclosure turned out great, giving the client the bass he was looking for, while cosmetically enhancing the rear of his RZR.

This 1969 Camaro came to us for some speakers and a new radio. The radio spot needed an adapter plate because it had be...
05/01/2026

This 1969 Camaro came to us for some speakers and a new radio. The radio spot needed an adapter plate because it had been previously cut up. We made a two-layer plate of acrylic and matching wood grain plastic to maximize the cosmetic integration. We love little challenges like this!!

We've added a new worker to our robot army! We have begun 3d printing. We are slowly adding its capabilities our workf...
04/16/2026

We've added a new worker to our robot army! We have begun 3d printing. We are slowly adding its capabilities our workflow and learning to plan for the printing time. 3d printing has already provided us with some solutions that would not be possible with our existing technologies.
Learning to design in the 3d realm has been very time consuming, but rewarding.
And, don't worry, we won't let the robots take over completely, we still do plenty of things by hand!

Address

1895 SW Main Boulevard
Lake City, FL
32025

Opening Hours

Monday 8:30am - 12:30pm
1:30pm - 5:30pm
Tuesday 8:30am - 12:30pm
1:30pm - 5:30pm
Wednesday 8:30am - 12:30pm
1:30pm - 5:30pm
Thursday 8:30am - 12:30pm
1:30pm - 5:30pm
Friday 8:30am - 12:30pm
1:30pm - 5:30pm

Website

Alerts

Be the first to know and let us send you an email when Pinnacle Autosound posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category