Attune - formerly Senseware

Attune - formerly Senseware The Leading Plug and Play IoT Platform – invented by engineers so you don't have to be one.

Construction projects are getting more complex. Schedules are tighter, equipment is more expensive, and teams need bette...
08/31/2026

Construction projects are getting more complex. Schedules are tighter, equipment is more expensive, and teams need better visibility into what’s happening across the jobsite.

Real-time monitoring is changing that.

Join Attune + S2N for a fireside chat with James Herndon, Development Executive at S2N, exploring how technology and real-time data are helping construction teams gain visibility, mitigate risk, respond to issues faster, and spend less time collecting data and more time solving problems.

Inside the Modern Jobsite: Technology, Data & What’s Next
📅 Thursday, September 3rd
🕒 3 PM ET | 12 PM PT

What You’ll Learn:
- How real-time monitoring is replacing manual jobsite data collection
- Why temperature, humidity, dew point, and other conditions matter for critical equipment and materials
- How monitoring can help teams identify and respond to issues faster
- What data center growth, supply chain constraints, and tighter schedules mean for construction teams
- Lessons learned from connected technology deployments on complex and remote jobsites
- Where AI, predictive insights, automation, and connected construction are headed next

Who Should Join:
- Construction leaders and executives
- Project and program managers
- Engineers and technology teams
- General contractors and construction managers
- Data center and mission-critical project teams
- Construction risk and insurance professionals
- Anyone responsible for jobsite conditions, equipment protection, or construction technology

Can’t join us live? Register anyway and we’ll send the recording straight to your inbox.

Save your spot → https://hubs.ly/Q04vWzfL0

How much time is your project team spending collecting jobsite data instead of using it? Monitoring temperature, humidit...
08/21/2026

How much time is your project team spending collecting jobsite data instead of using it? Monitoring temperature, humidity, dew point, and other conditions has traditionally meant walking the site, checking data loggers, recording readings, and reviewing information after the fact.

Real-time monitoring changes that.

Join Attune + S2N for a fireside chat with James Herndon, Development Executive at S2N, exploring how connected technology is helping project teams move beyond manual data collection and gain continuous visibility into jobsite conditions.

Inside the Modern Jobsite: Technology, Data & What’s Next
📅 Thursday, September 3rd
🕒 3 PM ET | 12 PM PT

What You’ll Learn:
- Why traditional jobsite data collection can consume valuable project time
- How continuous monitoring reduces routine trips to retrieve and check data loggers
- How remote access gives teams visibility into conditions without always being on site
- Why real-time data can help teams identify changes and respond sooner
- How shifting from collecting data to acting on it helps teams focus on higher-value work

Who Should Join:
- Construction leaders and executives
- Project and program managers
- Engineers and technology teams
- General contractors and construction managers
- Data center and mission-critical project teams
- Construction risk managers
- Construction insurance managers
- Anyone responsible for jobsite conditions, equipment protection, or construction technology

Save your spot → https://hubs.ly/Q04tVTGp0

Construction projects are getting more complex. Schedules are tighter, equipment is more expensive, and teams need bette...
08/19/2026

Construction projects are getting more complex. Schedules are tighter, equipment is more expensive, and teams need better visibility into what’s happening across the jobsite.
That’s where real-time data comes in.

Join Attune + S2N for a fireside chat with James Herndon, Development Executive at S2N, exploring how technology is helping construction teams reduce manual data collection, respond faster, protect critical equipment, and build smarter, more connected jobsites.

Inside the Modern Jobsite: Technology, Data & What’s Next
📅 Thursday, September 3rd
🕒 3 PM ET | 12 PM PT

What You’ll Learn:
- How real-time monitoring is replacing manual jobsite data collection
- How teams are using real-time data to respond to changing conditions faster
- Ways monitoring can help protect critical equipment and materials
- Lessons learned from deploying technology on complex and remote jobsites
- What’s next for AI, automation, and connected construction
-
Who Should Join:
- Construction leaders and executives
- Project and program managers
- Engineers and technology teams
- General contractors and construction managers
- Data center and mission-critical project teams
- Construction risk managers
- Construction insurance managers
- Anyone responsible for jobsite conditions, equipment protection, or construction technology

Save your spot → https://hubs.ly/Q04tD4tw0

Hotels run around the clock — but visibility into what the building is actually doing usually doesn't. The result shows ...
08/18/2026

Hotels run around the clock — but visibility into what the building is actually doing usually doesn't. The result shows up weeks later, in a utility bill or a review that says the room felt "off."

Our new guide covers the four solutions that close that gap: energy, IAQ, occupancy, and portfolio-level monitoring — and what the research says about each:
https://bit.ly/4bXYJEF

08/14/2026

Most GCs pay for 3+ air quality audits at $5–7K each before they can hand over a building. 😬 There's a smarter way — and it can cut that cost by two-thirds PLUS earn extra LEED credits. Here's how real-time IAQ monitoring changes the game.

Watch the full webinar: https://bit.ly/463DKww

A walk-through only shows you the building for the few minutes you're standing in it. It won't show the CO₂ rising in a ...
08/12/2026

A walk-through only shows you the building for the few minutes you're standing in it. It won't show the CO₂ rising in a full room, a motor beginning to strain, or moisture building behind a wall.

Continuous monitoring does—so issues surface early, not after a complaint or a repair.

Read the full blog: https://bit.ly/4fWfvXa

Renovation kicks up more than dust. Demolition, paint, and moisture release contaminants like PM2.5, VOCs, and mold-feed...
08/11/2026

Renovation kicks up more than dust. Demolition, paint, and moisture release contaminants like PM2.5, VOCs, and mold-feeding humidity — most of it invisible until it's already a problem. Spot checks only catch one moment. Continuous IAQ monitoring watches the whole project, flags hazards in real time, and confirms a building is ready for move-in.

Our new blog breaks it down: https://bit.ly/4wqp1qu

Rising costs. More repair calls. Comfort complaints. Those are the late symptoms — the equipment was sending quieter sig...
08/04/2026

Rising costs. More repair calls. Comfort complaints. Those are the late symptoms — the equipment was sending quieter signals long before: a shift in vibration, a creep in temperature, a change in its electrical draw.

Asset condition monitoring reads those signals first. It's the difference between scheduling a fix and scrambling for an emergency one.

Our new guide breaks down how it works, the sensor tech behind it, and how to build it into your facility workflow:
https://bit.ly/3TWAJeG

Wildfire smoke doesn't stop at the lobby doors.When Canadian wildfire smoke pushed fine particulates to record levels ac...
07/29/2026

Wildfire smoke doesn't stop at the lobby doors.

When Canadian wildfire smoke pushed fine particulates to record levels across U.S. cities, tenants wanted to know one thing: is the air in here any safer?
Most buildings were guessing. BXP wasn't.

Outside one of their buildings, PM2.5 climbed to 136 µg/m³. Inside, a 500-sensor network across 40+ sites was reading conditions at every intake, supply, and return point — every minute.

The full results are in the case study 👉 https://hubs.ly/Q04rbJBl0

As wildfire seasons grow longer, protecting the people inside our buildings is a year-round priority for facilities, edu...
07/28/2026

As wildfire seasons grow longer, protecting the people inside our buildings is a year-round priority for facilities, education, and commercial real estate teams.

Real-time monitoring closes that gap, showing teams what is reaching occupants and whether their defenses are holding. Our latest blog explores the health impact of wildfire smoke on building occupants and how monitoring turns an uncertain situation into a managed one:

https://hubs.ly/Q04r3ZJs0

Address

8603 Westwood Center Drive #340
McLean, VA
22182

Telephone

+15717666443

Website

,

Alerts

Be the first to know and let us send you an email when Attune - formerly Senseware posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Attune - formerly Senseware:

Shortcuts

Share

Category