NightFire Electronics

NightFire Electronics Welcome to the best place to buy Electronic Hobby Kits, Arduino Shield Kits, Resistor Kits, Capacito

This is the LED Christmas Tree Kit. This is a neat circuit that lights up 12 Multi-color Flashing LEDs.The Resistors are...
10/31/2026

This is the LED Christmas Tree Kit. This is a neat circuit that lights up 12 Multi-color Flashing LEDs.

The Resistors are laid out to look light Christmas Tree decorations. The flashing display is random and looks great. It uses a 9v battery.

This is an easy kit to make and good for early learners. NightFire Electronics LLC [email protected]" rel="ugc" target="_blank">[email protected]

Big M**f 14 Watt Tone StackThis kit is a very clean-sounding 14-watt Guitar Amplifier with the very popular Big M**f Ton...
10/29/2026

Big M**f 14 Watt Tone Stack

This kit is a very clean-sounding 14-watt Guitar Amplifier with the very popular Big M**f Tone Stack. The Amplifier is rated at 0.5% THD with 14v into a 4 Ohm load. This is great for learning new songs or just playing along with your favorite music. The Big M**f Tone Stack consists of a passive low-pass filter and a passive high-pass filter with a balancing control. This Big M**f has an additional control for the Body which affects the high-pass filter side. There are numerous versions of the Big M**f available in Guitar Pedals all over the place.

We have adapted the Big M**f Tone Stack and our version sounds great. It has a Tone and a Body control which are both active.

It will accept your guitar input via a 1/4" phono jack. The input is a very-high impedance FET circuit. The guitar sound is then routed thru a Big M**f Tone Stack with Tone and Body controls. The Big M**f Tone control portion uses Mylar (Metalized Polypropylene) Film capacitors for excellent audio characteristics. It is then fed to an OP Amp pre-amplifier with external frequency compensation for frequency stability prior to going into a Class AB, 14-Watt audio amplifier. Connect the output to your speaker cabinet for a neat experience. It will drive a 4 or 8 Ohm speaker, 10 watts or better. The PCB is approx 3.8" wide x 4.8" deep.

The output is available at a 1/4" phono jack AND at a 2-pin Screw Terminal. You get both in the kit. You will also get k***s for the controls.

The operating voltage is 12vdc. It has two 1000uF Capacitors on the input power for additional filtering. You will need a 12vdc power supply capable of delivering at least 2 amps; a 20-watt or better power supply will work just fine.

This is a kit. You will need soldering tools and supplies. Use at least a 4 to 8 Ohm, 10W speaker; none is supplied.

We also offer this as a Built & Tested unit for those that do not want to build it themselves. This kit is a great buy at $29.99 for kit only and $39.99 Built and Tested

NightFire Electronics LLC
http://vakits.com

10/29/2026

We are supporters of the "Maker Movement" and provide products to encourage Electronic Kit building. We will be attending the Maker Faire Orlando Fl. Oct 7th and 8th, come check us out.

Send a message to learn more

The use of sound and frequency therapy was once only used in ancient cultures; science is proving the benefits of sound ...
10/10/2026

The use of sound and frequency therapy was once only used in ancient cultures; science is proving the benefits of sound healing. More and more people are looking for alternative methods to create holistic well-being, especially methods that address the mind, body and spirit. Now, sound healing practices can be found in medical facilities, corporate wellness programs, elder care facilities, holistic health centers, life coaching, personal development programs and more. NightFire Electronics LLC has designed and manufactured an affordable personal portable module that will address your holistic well-being. The first 10 people who order one of the 1553 modules will also receive a pillow speaker with your order for no extra cost. Just type in “Mary” in the message section and your module will be fitted for this awesome little speaker. www.vakits.yahoo.com

Solfeggio - Sound Therapy 174 Hz, 285 Hz, 396 Hz, 417 Hz, 528 Hz, 639 Hz Frequencies - Relaxation-  Chakra (Portable)Thi...
10/09/2026

Solfeggio - Sound Therapy 174 Hz, 285 Hz, 396 Hz, 417 Hz, 528 Hz, 639 Hz Frequencies - Relaxation- Chakra (Portable)This is one of a series of precision tone generating devices that produce clean sinewave tones using the Solfeggio healing frequencies. This one is especially designed to utilize:
174 Hz - Promotes security and stability. Also known as the Foundation Frequency.
285 Hz - Therapeutic properties for physical and emotional balance. Also known as the Healing Frequency.
396 Hz - Aims to liberate negative energy and promote grounding, security, and stability. Also known as the Liberating Frequency and is the Root Chakra.
417 Hz - Resonates with emotions and creativity, facilitating positive change and healing from past traumas. Also known as the Resonating Frequency and is the Sacral Chakra.
528 Hz - Promotes healing and transformation, fostering love and compassion; associated with DNA repair. Also known as the Love Frequency and is the Solar Plexus Chakra.
639 Hz - Enhances communication, understanding, and harmony in relationships, promoting emotional healing. Also known as the Connecting Frequency and is the Heart Chakra.
Our Soundwaves generator was developed, designed, and built in Ocala, Fl. I
NightFire Electronics LLC [email protected]" rel="ugc" target="_blank">www,[email protected] See less

10/02/2026

We now offer Amplifier Kits, Ghost Detectors, Solfeggio, Nogier & Angel Frequencies, Crafts and more. Check us out at NightFire Electronics on Facebook for latest advertisements and specials.

Send a message to learn more

LM555 Timer One-Shot Monostable Kit  #1.This little low-cost kit consists of the LM555 Timer in the One-Shot mode (Monos...
10/02/2026

LM555 Timer One-Shot Monostable Kit #1.

This little low-cost kit consists of the LM555 Timer in the One-Shot mode (Monostable). It was designed for those that need a Timer (or two) with no fancy circuitry. The output is adjustable from less than a second to minutes via the timing potentiometer.

The output is a square-wave and is connected to the output pad. The output also drives a transistor which drives an LED, if you do not need the LED, simply do not install it. It works from 5v to 15v with the output voltage level the same as the Working Voltage. The timing capacitor can be changed to lengthen or shorten the output time.

The PCB is 0.062" thick, 1.5" x 1.0", double-sided with Plated Thru Holes, silk screen on top side, Red soldermask. It has a 94VO rating and has one mounting hole. Sold by NIghtfire Electronics LLC [email protected]" rel="ugc" target="_blank">[email protected]

This is the Adjustable Echo Audio Amplifier Kit. It includes the very popular Echo IC, PT2399 that feeds a LM386 Audio P...
09/30/2026

This is the Adjustable Echo Audio Amplifier Kit. It includes the very popular Echo IC, PT2399 that feeds a LM386 Audio Power Amplifier IC. This kit will include the PT2399 Echo IC, the LM386 Audio Amplifier IC, schematics, PCB, and the parts to build it. This is one of the world's most popular ECHO ICs along with the popular Audio Power Amplifier, LM386.

This Echo Amplifier Kit has been designed so that it has an input with built-in DC Voltage for an Electret Microphone. This feeds a Hi-Impedance Op Amp with adjustable gain which then feeds the PT2399 circuitry with an adjustment Echo potentiometer. The output of the PT2399 goes to the LM386, Audio Amplifier. The output is approximately 1/2 watt into an 8 Ohm load. The DC Power required is between 9vdc and 12vdc. [email protected]" rel="ugc" target="_blank">[email protected]

09/29/2026

Address

Ocala, FL

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Alerts

Be the first to know and let us send you an email when NightFire Electronics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to NightFire Electronics:

Shortcuts

Share

Nearby computer & electronics services