Live 3-D Graphics

05/19/2026

04/28/2026

🖨️ Pro Tips: Solving Mimaki Large Format Print Quality Issues
Is your Mimaki printer producing streaks, banding, or dull colors? Maintaining high-quality output on Mimaki large format printers requires a combination of strict maintenance, proper environmental controls, and accurate software settings.
Here is a guide to diagnosing and fixing the most common print quality problems.
1. Tackling Banding (Horizontal Lines)
Banding is often caused by media feed issues, nozzle clogs, or incorrect head height.
Run a Media Calibration (Feed Comp): If the printer feeds too much or too little material, lines will appear. Run the MEDIA COMP. function in the menu to correct the step-feed adjustment.
Enable MAPS (Mimaki Advanced Pass System): This technology uses an algorithm to minimize banding between passes. Ensure it is turned on in your RasterLink software.
Adjust Head Height: If the head is too low, it can cause drag; too high, and it causes spray.
Check Media Temperature: If the heater is too high, it can make the media wavy or cause white-looking streaks.
2. Nozzle Clogs & Missing Nozzles
A test print is your first line of defense. If the nozzle check is missing lines, try these steps:
Automatic Cleaning: Run a "Normal" or "Soft" clean.
Clean Capping Station & Wipers: Dried ink on the wipers or caps prevents the head from sealing properly. Replace wipers monthly and clean the cap tops regularly.
Manual Cleaning/Nozzle Wash: If automatic cleaning fails, use Mimaki cleaning solution to wash the nozzles.
Check White Ink: White ink settles quickly. Ensure you are shaking white cartridges daily.
3. Fixing Fuzzy or Grainy Prints
Check Drop Position (Drop Pos Correct): If printing bidirectional, misaligned heads will cause a "double image" or fuzzy look. Perform a DROP. POS CORRECT adjustment.
Clean the Encoder Strip: A dirty encoder strip (the clear plastic strip behind the carriage) causes the printer to lose position. Clean it carefully with water or alcohol.
Improve Resolution: Increase the number of passes in RasterLink, or switch to a higher resolution, lower-speed printing mode.
4. Color Inconsistency & Misalignment
Use the Correct ICC Profiles: Ensure your media profile in RasterLink matches the actual vinyl or banner material you are using.
Check Ink Density: If colors are too light, adjust the ink density settings in the software.
Replace Dampers: If colors are erratic or banding won't go away, the dampers may have lost their "prime" and need to be replaced.
5. Summary of Daily/Weekly Maintenance
Daily: Perform a test draw, clean the wiper, and shake white ink.
Weekly: Perform a "Nozzle Wash" (soaking the heads) and clean the area around the head.

04/25/2026

"I’ve spent years in the trenches of large-format design and production. I know how a messy file or a backed-up invoicing system can kill a shop's momentum. This week, I’m offering a few hours of my time for free to help a couple of shop owners tighten up their workflow—from setting up cut lines to automating your billing. No strings, just giving back to the industry."
www.live3dgraphics.com
​
​
​
​
​

04/22/2026

# # ⚡️ Speed Up Your Shop: The Power of Adobe Illustrator Actions
If you’re running a print shop, you know the "pre-press grind" is real. Between setting bleeds, separating colors, and adding cut contours, the minutes add up fast. That’s where **Illustrator Actions** become your shop's best friend.
Think of an Action as a "Record" button for your workflow. You perform a task once, save it, and then repeat it for every future job with a single click.
# # # 🚀 3 Ways Actions Revolutionize Your Print Workflow

| **Bleeds & Margins** | Manually resizing every artboard and object. | **One click** to offset paths and expand backgrounds. |
| **Cut Lines** | Selecting paths and applying "CutContour" swatches. | **Instant application** of specific technical spot colors (like Onyx). |
| **File Prep** | Renaming files and saving as PDFs or EPS. | **Automated Batching** to save multiple files with "_PRINT" suffixes. |

# # # 🛠 Why Your Shop Needs This:
* **Consistency is King:** No more forgotten bleeds or wrong stroke weights. Every file is prepped exactly the same way, every time.
* **Faster Turnarounds:** Turn a 10-minute prep task into a 2-second click. Get your files to the RIP software (like Onyx or VersaWorks) faster.
* **Reduce Fatigue:** Let the software handle the repetitive clicks so you can focus on the creative side of the design.
**Pro Tip:** Use **Button Mode** in your Actions panel to turn your most-used sequences into a simple dashboard of color-coded buttons!
> "Efficiency isn't about rushing; it's about automating the boring stuff so you can focus on the masterpiece."

04/22/2026

Stop Turning Away Projects: Scale Your Print Shop Instantly! 🚀
​Is your design queue backed up? Are you spending more time at the computer than at the printer or on the install? It’s time to move from "drowning in deadlines" to seamless production.
​When you partner with a remote overflow designer, you aren't just hiring a freelancer—you’re adding a high-octane engine to your business workflow.
​Why Print Shops are Making the Switch:
​Zero Overhead: No extra desks, no new software subscriptions, and no payroll taxes. Pay only for the design work you need.
​Production-Ready Files: Get files tailored for your specific RIP software (like ONYX) with proper CutContour paths and bleeds already set.
​Close More Deals: Impress clients with 3D Wrap Proofs and high-end renderings that a busy shop floor rarely has time to create.
​48-Hour Turnarounds: Keep your printers running and your installers busy while we handle the technical design prep in the background.
​Our Specialized Services Include:
​Vehicle Wraps: (Vans, Trucks, Performance Cars)
​Large Format: HD Wall Murals, Banners, & Signs
​Technical Prep: Cut-file setup, Color Bleeds, & AI Image Upscaling
​Branding: Business Cards, Flyers, & Logo Design
​Ready to clear your backlog and grow your revenue?
​🔗 Visit live3dgraphics.com to see how we can support your shop today!
​

04/13/2026

Helping another shop today 😁:Is your print shop running efficiently, or is it a mad dash to the finish line? 🏃💨
We know the pain points:✨ Tedious manual quoting🎨 Design file errors📦 Production bottlenecks
We help print shops go from chaotic to optimized! We specialize in sharing tips for fast, accurate estimates, smarter design workflows, and consistent production techniques that protect your profits. 💰
💡 Quick Tip: Standardize your processes! Create templates for your top 5 products to reduce prep time by up to 50%.
Follow us for weekly print production hacks! 🛠️

03/21/2026

Are you on Google maps?

Find local businesses, view maps and get driving directions in Google Maps.

03/09/2026

Take Your Shop to the Next Level with Professional, Print-Ready Designs 🚀
​Are you a print shop owner or a business looking for high-end graphics without the overhead? At LIVE 3D Graphics, we specialize in providing remote large-format design services that are ready to hit your printers the moment you download them.
​We don’t just design—we understand the technical side of the industry. Every file is built with production in mind, ensuring a seamless workflow from screen to substrate.
​What You Get with Every Project:
​Print-Ready Files: High-resolution layouts optimized for HP Latex, Solvent, or UV printing.
​Integrated Print & Cut: Files include precise cut contours (CutContour) compatible with Graphtec, Summa, and more.
​RIP-Optimized Setup: Designed to work perfectly with ONYX, Flexi, or VersaWorks to ensure color accuracy and efficient tiling.
​Versatile Expertise: From complex vehicle wrap templates to massive wall murals and 3D themed environments.
​Why Outsource Your Design?
​✅ Save Time: Focus on installation and production while we handle the creative heavy lifting.
✅ Precision Fit: We use industry-standard templates for vehicles and custom measurements for architectural wraps.
✅ Scalability: Get professional-grade design support whenever your workload spikes.
​Ready to get started?
​Let’s streamline your production. Visit live3dgraphics.com to see our portfolio and let’s get your next project moving!
​

02/21/2026

I want to give a huge shout-out to my top Stars senders. Thank you for all the support!

Tiffani Marie Lugo

01/19/2026

Do you LOVE YOUR JOB??????

01/18/2026