D3 LED

D3 LED Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from D3 LED, Electronics Company, 11370 Sunrise Park Drive, Rancho Cordova, CA.

D3 is a pioneer in high-performance LED display solutions, powering the most iconic installations across entertainment, broadcast, sports and retail environments.

09/02/2026

There are plenty of companies that can sell you an LED display. We’d rather build the right one.

What sets ReveLux | D3 apart is our ability to engineer display solutions around the specific needs of a project, instead of forcing every application into an off-the-shelf product.

From transparent mesh and fine-pitch LED to COB, 4-in-1 technology, custom shapes and purpose-built solutions, our diverse technology portfolio gives us the freedom to start with the use case and work backward.

Because sometimes a standard 16:9 display is exactly what you need. And sometimes the project demands something entirely different. Learn more: https://ow.ly/VfKr50ZHibp

08/31/2026

Sometimes the best products start with a challenge.

For one project, the existing motors and structure could support a maximum of 8,000 pounds. The solution? Engineer an LED product that could deliver the performance the application demanded at the lowest possible weight.

It’s a great example of how we approach LED differently: start with the application, solve the engineering challenge, and build what the project actually needs.

Learn more: https://ow.ly/Qrt750ZHhX4

08/27/2026

Brighter. Cooler. More efficient.

The eNVy Series brings next-generation FlipChip technology to fine-pitch indoor LED, eliminating traditional bonding wires and unlocking some significant performance advantages.

The result? Up to 30% greater brightness, 30% better energy efficiency, and 30% less heat compared with traditional designs.

Learn more: https://ow.ly/Wza950ZEKUX

08/26/2026

What if replacing LCD with direct-view LED didn’t mean blowing the budget? That’s the idea behind eNVy .625 COB.

At InfoComm, we put it side-by-side with a 1920 × 1080 LCD, feeding both displays the same Full HD signal to show just how far fine-pitch LED has come.

The gap between LCD and LED is getting smaller. The possibilities for LED are getting much bigger. Learn more: https://ow.ly/cNcJ50ZELrO

08/24/2026

Power designed to keep performing.

TruePower packs serious capability into a compact 2RU form factor, with capacity for up to eight 3,200-watt power supplies in a single chassis.

Start with the capacity you need and add power supplies as your requirements grow. Because the supplies are bussed together, they provide built-in redundancy and are hot-swappable, helping keep power flowing even if an individual supply fails.

That means greater uptime, easier service, and a power architecture that can scale with the display it supports. Learn more: https://ow.ly/BvV650ZEL4W

08/20/2026

From Impress to Elevate to Aspire, our outdoor LED portfolio gives you the flexibility to choose the right cabinet size, pixel pitch, brightness, and diode technology for the application.

Impress offers a versatile platform with pixel pitches ranging from 3.9 mm to 25 mm. Elevate builds around a 320 × 320 mm module architecture, while the larger-format Aspire is designed for true long-distance viewing applications where scale and brightness matter.

Across the lineup, smart engineering makes installation and ownership easier: rapid display assembly, loop-through power and data, durable die-cast aluminum construction, weather-resistant components, and both front and rear serviceability.

Different footprints. Different viewing distances. One goal: build the right LED display for the space.

08/18/2026

Meet the next generation of Conform, our outdoor LED built around FlipChip technology for greater brightness, improved power efficiency, and better thermal performance.

The redesigned module replaces bulky plastic construction with a slim, structurally strong die-cast aluminum design that dissipates heat more efficiently. But one of the biggest advantages is what doesn’t have to change.

Conform is designed to integrate with existing infrastructure, creating the potential to upgrade displays module by module while retaining existing structural steel and, depending on the installation, power and data infrastructure.

Need something completely custom? Our in-house machine shop can engineer cabinets around virtually any application. Learn more: https://ow.ly/OZyr50Zyc61

08/14/2026

So, why 4-in-1 MiniLED? In Part 1, we introduced Perform 1.56 eXtreme and its low-scan design for exceptional on-camera performance. Now we’re taking a closer look at the technology behind the screen.

By packaging four LEDs together, 4-in-1 MiniLED creates a stronger connection, an important advantage for the demands of staging and rental environments. And because Perform eXtreme achieves that durability without an additional protective coating, you get some significant benefits:

• Low reflectivity for deeper contrast under studio lighting
• Greater durability for staging and rental applications
• Easier diode-level repairability
• Up to a 7,680 Hz refresh rate
• Support for frame rates up to 251 fps

Learn more: https://ow.ly/xhia50Zyc2a

08/13/2026

Perform 1.56 EXtreme takes everything we learned from the original Perform 1.56 and pushes it further.

A new 1/6 scan design keeps the image illuminated longer, helping cameras capture clean, consistent content with fewer visible scan lines — an important advantage for broadcast, live production, house of worship, and other camera-critical environments.

We’ve also moved to 4-in-1 MiniLED flip-chip technology, enabling brightness up to 1,500 nits while delivering approximately 30% greater power efficiency when operating around 700–800 nits.

Better on camera. Brighter when you need it. More efficient when you don’t. Learn more: https://ow.ly/yhz850Zybe9

08/11/2026

Meet Marvel + Starlight, our 2.6mm rental-style LED solutions designed to work together while giving you the flexibility to build for different applications.

Both share the same core specs, but each brings something different to the setup. Marvel offers options for flown or ground-stacked displays, while Starlight adds wall-mounting flexibility to the mix.

The real advantage? Their LED modules are interchangeable.

Same technology. Different possibilities. One seamless system. Learn more: https://ow.ly/EbCI50ZybaZ

Address

11370 Sunrise Park Drive
Rancho Cordova, CA
95742

Website

Alerts

Be the first to know and let us send you an email when D3 LED posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category