Swab-its Foam Swabs

10/30/2026

Finished your latest CREAMi batch? Give the lid a closer look before putting it away.

Residue can stay under the paddle and around the seal even after a quick rinse.

Our new guide covers washing the lid and paddle, rinsing through the lid’s drain openings, and wiping the exposed spindle. It also shows where a foam swab can help with the small grooves on the detached lid.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-ninja-creami-lid-paddle-spindle

# #

Food residue can remain beneath a CREAMi paddle and around the lid seal. Learn how to wash the removable parts, flush the lid, wipe the exposed spindle, and dry everything before storage.

10/20/2026

We’re Exhibiting at MRO Europe 2026 in Amsterdam!

Super Brush LLC is heading to MRO Europe 2026 in Amsterdam, The Netherlands! The conference runs October 27–28, and the exhibition takes place October 28–29. We look forward to connecting with aviation maintenance professionals from across Europe and beyond.

If you’re attending, stop by our booth to see how our Made in the USA, lint-free foam swabs are helping improve precision cleaning and application in critical MRO environments.

What you’ll find at our booth:
✔️ Free samples for all attendees
✔️ BAC 5000-approved foam swabs trusted in aviation applications
✔️ A look at Swab-its® e-commerce for low-volume, fast ordering
✔️ Custom foam swab solutions — from concept to full production

From avionics and connectors to sealants, windows, and sensitive components, Super Brush foam swabs are designed for precise, low-lint cleaning and application in demanding MRO environments.
We look forward to meeting customers, partners, and new contacts in Amsterdam.

Booth: 5-1611 | Halls 1–7
Conference: October 27–28, 2026
Exhibition: October 28–29, 2026
Amsterdam, The Netherlands

👉 Stop by, grab samples, and let’s talk about your next application.
#𝑴𝒂𝒅𝒆𝒊𝒏𝑼𝑺𝑨

10/15/2026

If your Stanley lid still smells after a wash, take a closer look under the rotating cover.

The gasket groove and straw opening are easy places to miss.

Our new guide walks through cleaning a Quencher FlowState lid, including which parts to separate, where a foam swab helps, and why the pieces need time to dry before they go back together.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-stanley-quencher-lid

Residue can hide beneath a Stanley Quencher lid’s rotating cover and around its seals. Follow this practical routine for washing the lid, straw, and removable gasket, then drying everything before reassembly.

10/09/2026

Is your Keurig brewing slowly, stopping short, or leaving grounds in the cup? The pod holder or needle area may need attention, but the right method depends on the brewer model.

Our new guide explains how to clean the removable K-Cup pod holder, follow the correct entrance and exit needle procedure, and tell the difference between a coffee-ground clog and mineral scale. It also covers the places a precision foam swab can safely reach, and the sharp openings it should never enter.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-keurig-needle-k-cup-pod-holder

A clogged Keurig needle or dirty pod holder can slow the brew, reduce the cup size, or leave grounds in your coffee. Learn how to clean the user-serviceable parts safely, choose the correct needle method for your model, and tell when the brewer needs descaling instead.

10/02/2026

Has your faucet stream gone from steady to weak, crooked, or splashy? The aerator at the end of the spout may be holding more mineral scale and grit than you think.

Our new guide explains how to identify exposed and concealed aerators, remove the part without damaging the finish, clean the screens and housing, put everything back in the right order, and tell when the blockage is somewhere else.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-faucet-aerator-restore-water-flow

A clogged faucet aerator can weaken the stream or send water spraying sideways. Learn how to identify the aerator, remove it safely, clear mineral buildup, and test whether the restriction is inside the aerator or farther upstream.

09/22/2026

That chalky ring in the tank is not the only place a humidifier needs attention. Mineral buildup can also collect in the base and around the ultrasonic plate, where rough scrubbing can do real damage.

Our new guide breaks the job into safe, manageable steps: what to clean daily, how to descale the tank and base, how to treat the ultrasonic plate gently, and why a thorough rinse matters before the unit goes back into service.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-humidifier-tank-base-ultrasonic-plate

Mineral scale and water residue can collect in a humidifier tank, base, and ultrasonic plate. This guide explains how to clean each area safely, rinse thoroughly, and reduce white dust without wetting electrical components.

09/18/2026

A hummingbird feeder can look clean from the outside while sticky nectar is still sitting inside the ports and base channels.

Our new guide walks through the whole job, from emptying the reservoir and cleaning the feeding ports to rinsing, drying, and refilling with fresh nectar. It also covers how often to change nectar, when vinegar or dilute bleach may be appropriate, and which cleaning mistakes to avoid.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-hummingbird-feeder

Sugar residue can remain inside hummingbird feeder ports and base channels even when the nectar reservoir looks clean. This guide explains how to disassemble, scrub, rinse, dry, and refill the feeder safely.

09/10/2026

🚗 Get Into the Details with Swab-its® Car Care Foam Swabs!

Some of the hardest parts of your vehicle to clean are the smallest ones. Air vents, buttons, seams, trim, tight corners and other hard-to-reach areas can be difficult to tackle with ordinary detailing tools.

That’s where Swab-its® Car Care Foam Swabs come in.

✅ Soft, non-abrasive foam
✅ Lint-free and fiber-free
✅ Washable & reusable
✅ Great for cleaning and controlled application
✅ Use on cars, motorcycles, boats, ATVs and more
🇺🇸 Made in the USA

The 12-piece Car Care Foam Swab Set gives you a simple tool for getting into those areas that towels, brushes and larger detailing tools can miss.

🧽 Small tool. Big detailing possibilities.

👉 Shop the 12-Piece Set:
Swab-its® Car Care Foam Swabs – 12 Piece Set

#𝑴𝒂𝒅𝒆𝒊𝒏𝑼𝑺𝑨

08/28/2026

That Owala lid can look clean while residue is still hiding beneath the spout gasket or around the straw connection.

Our new guide shows how to take apart the removable FreeSip components, clean the lid and straw, reach the small recesses a sponge misses, and let everything dry before putting it back together. It also covers what Owala says about dishwashers, vinegar, and cleaners to avoid.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-owala-freesip-lid-straw-gasket

Residue can hide beneath an Owala FreeSip spout gasket, around the straw connection, and inside narrow lid recesses. This guide explains how to separate, wash, rinse, dry, and reassemble the removable parts without damaging the lid or finish.

08/20/2026

Earwax, skin oil, and pocket lint can build up quickly on AirPods, but pushing debris deeper or using too much liquid can make the problem worse.

Our latest guide breaks down Apple's current cleaning directions for AirPods and AirPods Pro, including which models have a specific mesh-cleaning routine, how to wash removable Pro ear tips, and how to clean the charging case without damaging the port or contacts.

Read the guide: https://swab-its.com/blogs/news/how-to-clean-airpods-and-charging-case

AirPods collect skin oil, earwax, dust, and pocket debris, but the wrong tool or too much moisture can damage their meshes and charging contacts. This model-aware guide explains how to clean AirPods, AirPods Pro ear tips, and the charging case safely.