SerialComm

SerialComm www.SerialComm.com is a leading manufacturer of high quality commercial & industrial data communication equipment.

SeialComm is a manufacturer & distributor of Data Communication Products

The ETH-FIBER-SM is a bi-directional externally powered 10/100 Ethernet to Single Mode Fiber Optic Converter which conve...
03/11/2022

The ETH-FIBER-SM is a bi-directional externally powered 10/100 Ethernet to Single Mode Fiber Optic Converter which converts a standard 10/100 Ethernet to SC or ST connector type fiber optic link. A data direction auto-turnaround feature automatically enables the Ethernet transmit & receive data signals when data is present, avoiding the need for software drivers, & making the device fully plug-&-play. The ETH-FIBER-SM supports straight-through (MDI) or crossover (MDX) cable configurations. The ETH-FIBER-SM has a RJ45 connector for the 10/100M Ethernet port, and either an ST type or SC type connector for the fiber optic link. The unit extends the maximum distance of any 10/100M Ethernet signal up 12.4 miles (20 km) using SM fiber optic cable. The unit is enclosed in a rugged steel housing. An external power supply is included... More features at: www.serialcomm.com (MODEL: ETH-FIBER-SM) ✔

"I am working w. expensive equipment. We have been interfacing w. your products for the past 8 months now without a si...
03/10/2022

"I am working w. expensive equipment. We have been interfacing w. your products for the past 8 months now without a single failure. Your products are high & . We would recommend them to anyone." --Peter
--> www.serialcomm.com ✔
--> [email protected] ✔
--> 877-218-7964 ✔

This will also repeat RS-485 or RS-422 with opto-isolation. A built-in data direction auto-turnaround feature automati...
03/10/2022

This will also repeat RS-485 or RS-422 with opto-isolation. A built-in data direction auto-turnaround feature automatically enables the RS-485/RS-422 driver when data is present eliminating the need for software drivers, & making the device fully plug-&-play. The REP-485/422-9E is an effective solution for protecting & devices from voltage surges, lightning strikes, ground loop conditions & signal noise problems. The unit is not reliant on port power so you do not have to worry about the RS-485 or RS-422's ability to power the converter. The REP-485/422-9E has a db-9 female connector or terminal block on one RS-485/RS-422 port, & either a db-9 male connector on the other RS-485/RS-422 port. Two terminal blocks are included with the package. The terminal block plugs into the RS-485/RS-422 port, providing screw-lug wire terminations for the port. The unit is enclosed in a aluminum housing. This converter operates from 0 to 115,200 Baud... www.serialcomm.com (MODEL: REP-485/422-9E) or email us at: [email protected] ✔

The CON-422-PE25 is a bi-directional port powered RS232 to RS422 converter which converts a full-duplex RS232 port to a ...
03/09/2022

The CON-422-PE25 is a bi-directional port powered RS232 to RS422 converter which converts a full-duplex RS232 port to a full-duplex four-wire RS422 port. A built-in data direction auto-turnaround feature automatically enables the RS422 driver when data is present from the RS232 port, eliminating the need for software drivers, & making the device fully plug-&-play. The CON-422-PE25 has a db-25 female connector on the RS232 serial port, and db-25 male connector on the RS422 port. The unit is enclosed in a rugged ABS housing, & is powered from the RS232 data lines; no external power is required. This converter operates from 300 to 115,200 bps... See more specs at: www.serialcomm.com (MODEL: CON-422-PE25) ✔

#

SerialComm's industry proven reliable serial, & fiber optic at low prices are offered with worldwide free shipping &...
03/09/2022

SerialComm's industry proven reliable serial, & fiber optic at low prices are offered with worldwide free shipping & some day express shipping. Our products are fully certified & come with a 30 day unconditional return guarantee & a 5 year manufacturer's warranty. When you buy products you are buying the best quality, & that is very important when interfacing with expensive equipment. SerialComm products are industry proven are widely used by thousands of companies world-wide... www.serialcomm.com or [email protected] ✔️

The TTL-485-5P is a bi-directional 5V externally powered RS485 to 5V TTL converter which converts a half-duplex RS485 po...
03/09/2022

The TTL-485-5P is a bi-directional 5V externally powered RS485 to 5V TTL converter which converts a half-duplex RS485 port to a 5V TTL signal. A built-in data direction auto-turnaround feature automatically enables the TTL driver when data is present from the RS-485 port, eliminating the need for software drivers, and making the device fully plug-&-play. The TTL-485-5P has a db-9 male connector on the RS485 port, & db-9 male connector on the TTL port. Two separate terminal blocks are included with the product - one for the RS485 port & the other for the TTL port. The terminal blocks plugs into the RS485 & TTL ports, providing screw-lug wire terminations for the ports. The unit is enclosed in a rugged ABS housing, & is externally powered. This converter operates from 300 to 115,200 bps... www.serialcomm.com (MODEL: TTL-485-5P) or email us at: [email protected] ✔

Fast Free World-wide Shipping ✔ Same-day Express until 6:30pm E.S.T. ✔ 24 X 7 Customer Service ✔ Free Engineering Techni...
03/08/2022

Fast Free World-wide Shipping ✔ Same-day Express until 6:30pm E.S.T. ✔ 24 X 7 Customer Service ✔ Free Engineering Technical Support ✔ Reseller & Volume Discounts ✔ www.serialcomm.com or [email protected] ✔

Fiber optic transmission has many benefits over copper wire systems, including large bandwidth, immunity to EMI/RFI & li...
03/08/2022

Fiber optic transmission has many benefits over copper wire systems, including large bandwidth, immunity to EMI/RFI & lightning, protection from high current electrical exposure, chemical corrosion & atmospheric conditions. Serial & Ethernet systems can be converted to fiber optic & transmitted over long distances using serial/Ethernet fiber optic converters (modems)... Learn more at: www.serialcomm.com ✔️

The CON-485-PE9 is a bi-directional port powered RS232 to RS485 converter which converts a full-duplex RS232 port to a h...
03/07/2022

The CON-485-PE9 is a bi-directional port powered RS232 to RS485 converter which converts a full-duplex RS232 port to a half-duplex two-wire RS485 port. A built-in data direction auto-turnaround feature automatically enables the RS485 driver when data is present from the RS232 port, eliminating the need for software drivers, & making the device fully plug-&-play. The CON-485-PE9 has a db-9 female connector on the RS232 serial port, & db-9 male connector on the RS485 port. Two separate terminal blocks, a rugged terminal block & a terminal block with built-in 120 Ohm termination are included with the product for maximum flexibility. The terminal blocks plugs into the RS485 port, providing screw-lug wire terminations for the port. The unit is enclosed in a rugged ABS housing, & is powered from the RS232 data lines; no external power is required. This converter operates from 300 to 115,200 bps... www.serialcomm.com or [email protected] ✔️

#

The USB-485C is a 9-pin high quality professional grade bi-directional powered USB to RS485/RS422 adapter with ESD & s...
03/07/2022

The USB-485C is a 9-pin high quality professional grade bi-directional powered USB to RS485/RS422 adapter with ESD & surge protection & constructed with industrial grade components. The RS485 or RS422 to USB adapter features both 9-pin DB9 for simple cable installation or included multifunctional 5-way terminal block for convenient screw terminal installation. These USB to RS485/RS422 utilize the latest superior FTDI chipset & easy to install drivers are compatible with most Windows/MAC/LINUX operating systems including Windows 7, MAC OS 10 & Ubuntu. 300 to 1mbps Baud Operation... www.serialcomm.com (MODEL: USB-485C) or email us at: [email protected] ✔

The USB-ISO-485 is an industrial-grade 2500V opto-isolated port-powered bi-directional USB to RS485 or RS422 converter w...
03/05/2022

The USB-ISO-485 is an industrial-grade 2500V opto-isolated port-powered bi-directional USB to RS485 or RS422 converter with ESD & surge protection in a 9 pin or RJ45 format. Since it is port-powered, no external power is needed. The USB converter utilizes the latest FTDI chipset drivers making upgrading to new computers a breeze. The USB to RS485/RS422 converter has a USB female connector on the USB side & RJ45, DB9 male connector or 6-way terminal block on the RS485/RS422 side. Operates reliably from 300 to 128K Baud... See more specs at: www.serialcomm.com (MODEL: USB-ISO-485) ✔

Although our high quality products are sold at very low prices, we offer additional volume discounts & reseller incentiv...
03/05/2022

Although our high quality products are sold at very low prices, we offer additional volume discounts & reseller incentives. Our pricing is competitive & varies due to factors such as quantities in question & reseller status. For a verbal quote please call our toll free number 1-877-218-7964 & speak to a sales consultant or email us at [email protected] for a written quote!

Address

Wall, NJ
07719

Website

Alerts

Be the first to know and let us send you an email when SerialComm posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to SerialComm:

Shortcuts

Share

Category