Datanomix

Datanomix Datanomix is the leader in Real-Time Automated Production Monitoring for Industrial Manufacturers. Request a Demo ↴
https://datanomix.io/schedule-a-demo/

Data-Powered Production™ exists to bring machine data, business data, and your team together.

When the floor moves fast. So should your data.Jamie Lerma runs high-mix, high-setup work at ATD Precision Manufacturing...
09/01/2026

When the floor moves fast. So should your data.

Jamie Lerma runs high-mix, high-setup work at ATD Precision Manufacturing: 28 monitored machines, 8 to 10 setups a day, no two jobs alike. Exactly the kind of floor that needs real-time visibility.

In this First Down , Jamie and Gabe Maentz discuss what changed when this 75-year-old shop got a live view of their floor, what their Datanomix Pilot experience was like, and how they secured program delivery for CMMC compliance with G-Code Cloud + DNC.

Watch the recording: https://hubs.la/Q04vXDLc0

08/31/2026

"Can we get better, or do we need to reevaluate our quoting structure?"

That is the question Frank Burch asks at Southern Machine Works once a job is done.

He told Tony Gunn how it works. The quote sets the target. Datanomix shows what actually happened on the machine. If the numbers don't match, the quote is reevaluated so the next one is sharper and customers are happier.

Catch the full story to see how you can tighten your quoting and build customer trust: https://hubs.la/Q04rBL7W0

08/28/2026

Most vendors disappear after the install, hand over an invoice, and say "good luck."

We do it differently. Kick-Ass Coaching tailored to your business, for the life of our relationship, not just the first ninety days.

If you're already running Datanomix, step up to a Coaches' Workbench at International Manufacturing Technology Show and get quality time with your Coach in person. Bring the question you've been sitting on, or the problem you've been meaning to ask about.

Not a customer yet? Pull up a stool and listen in. Watching a real coaching session is the fastest way to understand why people stick around.

Everything else happening at booth #135521: https://hubs.la/Q04vLdLW0

Setup. First article. In-process machining.This is where margin lives or dies. 80% of manufacturers say these are the st...
08/28/2026

Setup. First article. In-process machining.

This is where margin lives or dies.

80% of manufacturers say these are the stages where they have the least visibility. And without it, you're not managing your process. You're reacting to it. By the time you know something went wrong, it has already cost you.

Find out what better visibility during setup and in-process machining actually changes on the floor.

https://hubs.la/Q04nrmKj0

08/27/2026

Your machines have more to tell you than your software is asking.

Mike Masterson at Reata Engineering & Machine Works, Inc. came back to machining after 12 years and saw the gap close up:
"The software is just the next level. To manage all these advanced machines, you need advanced software."

Mike's shop runs modern hardware. The point still holds for shops running older equipment. Every machine has data. The question is what your software does with it.

Learn more on our blog: https://hubs.la/Q04mlZQ60

08/26/2026

You run a tight shop. But no one can hold a thousand daily details in their head, and the numbers that show you where to improve slip away.

That lost history is the enemy of getting better. How a job actually ran ten months ago is gone, unless something captures it.

Bob McGregor of Neo Industries closed that gap with Datanomix, capturing every run. Now Bob’s shop history is always there, so every job builds on the last. It's an edge you give to the whole team, so no one has to run on memory.

Gabe Maentz gets the full story from Bob in our latest First Down session.

Watch it here: https://hubs.ly/Q04tmmY50

If someone edited a program at the control last week, would you know? Maybe it got written down. Maybe it didn't.That's ...
08/25/2026

If someone edited a program at the control last week, would you know?

Maybe it got written down. Maybe it didn't.

That's not a process. That's a guess.

The new Command Center in G-Code Cloud + DNC puts every program, every machine, and every open change request on one screen. Drag a file onto a machine card, and it's staged and ready to run. When someone edits at the control, that machine lights up orange. You see the changes line by line, then publish them to the library or discard them.

Going into an audit, how would you know where your program gaps are? The new Compliance Scanner flags it first, scanning your program library in seconds for what's missing: revision, author, and tooling info. The details your customers and auditors expect to see.

One shows you where your programs are going. The other shows you what's actually in them.

Watch the full walkthrough: https://hubs.la/Q04v8qT30

08/25/2026

For five years, Josh Cook quoted one of his steadiest parts at 20 seconds.

46,000 cycles across four operators said otherwise.

This is what happens when you finally have data you can actually trust, and why gut feel and time studies will only get you so far.

A big thanks to Right Angle Steel & Fabrication for being willing to share the messy middle with us and Hexagon Manufacturing Intelligence.
https://hubs.la/Q04n3Fgs0

A lot of shops heard "Phase 2 got canceled" and stopped worrying about .That's the most expensive thing you could take ...
08/21/2026

A lot of shops heard "Phase 2 got canceled" and stopped worrying about .

That's the most expensive thing you could take away from this. The deadline moved. The work didn't.

What applied before the deadline still applies today. And the piece most shops haven't solved is the floor: G-code on a shared drive, moved by USB stick, no record of who touched what.

That's the gap. That's what G-Code Cloud + DNC closes. Learn what still applies to your shop: https://hubs.la/Q04tmlBH0

See G-Code Cloud + DNC running in Booth #135521 at International Manufacturing Technology Show.

08/21/2026

Your ERP tells you what should happen. Datanomix tells you what actually did and what to do about it.

Kody Guidry of Coastal Machine & Supply, Inc. connected ProShop to , and suddenly every part running on the floor had a story to tell. Real cycle times versus quoted cycle times. Side by side. In real time.

"ProShop says 20 minutes. We're running 40. That's a C-minus. Now we know exactly which jobs to tackle and which ones to reprice."

That's not just machine monitoring. That's years of production intelligence built specifically for precision manufacturers, telling you not just that something is wrong, but what to do about it.

Watch the full webinar with Gabe Maentz and Kody to see connected manufacturing in action.

https://hubs.la/Q04ncXsF0

Address

300 Innovative Way, Suite 2221
Nashua, NH
03062

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

(866) 488-4369

Website

Alerts

Be the first to know and let us send you an email when Datanomix posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Datanomix:

Shortcuts

Share

Category