Tec-Stop

Tec-Stop From one-off single wire assemblies to high volume complex harnesses, we provide high quality, bespoke products and solutions across a wide range of markets.

From one-off single wire assemblies to high-volume complex harnesses, we provide high-quality, bespoke products and solutions across a wide range of markets. Our core capabilities include cable harnesses, control box and panel building, and electrical components - delivered with precision and reliability at every stage.

The wiring fault you meet in March was almost always there in November.Agricultural machinery spends the winter standing...
09/11/2026

The wiring fault you meet in March was almost always there in November.

Agricultural machinery spends the winter standing still and the spring working flat out, which makes the next few months the only sensible window to deal with wiring that's been limping along. Chafed looms, corroded earths, connectors that need a wiggle before they'll read - every one of those is an afternoon on the yard now, or a lost day in the field later, at the point in the year when a lost day costs the most.

At Tec-Stop we build and replicate looms for tractors, trailers, sprayers, hedge cutters and mowers, made to stand up to moisture, dust, vibration and temperature extremes.

Bring us the machine you've been nursing through the season and we'll sort it before spring.

Made in Worcester, supplied across the UK.

If a batch of cable turns out to be wrong, the only question that matters is which builds it went into.Most of the time ...
05/11/2026

If a batch of cable turns out to be wrong, the only question that matters is which builds it went into.

Most of the time nobody asks. When somebody does - a warranty claim, a recall, a failure that has to be explained to a customer - the answer either exists or it doesn't, and there's no reconstructing it afterwards from memory and delivery notes.

Traceability is among the least interesting things a manufacturer does, right up until the day it's the only thing anybody wants to talk about. It comes down to knowing which materials went into which assembly, and when.

At Tec-Stop we work with traceable materials and keep the build recorded, so if that question ever arrives, the answer is already there.

Could you answer that question today, about a batch you built last year?

Most of the wiring inside branded equipment was made by somebody else. That's normal. What varies is whether it looks li...
02/11/2026

Most of the wiring inside branded equipment was made by somebody else. That's normal. What varies is whether it looks like it.

If you sell equipment, the wiring inside it carries your name whether or not it carries your logo. When a service engineer opens a panel two years in, the loom they find is part of the impression your product leaves. So is the bag it turned up in, and whose label was on it.

Our own branding service puts your identity on the product and the packaging - marked assemblies, branded bags and boxes, arriving under your name rather than ours.

At Tec-Stop we're perfectly comfortable being invisible. That's rather the point of it.

Your name on it, not ours. Ask us how that works.

Sourcing cable assemblies for medical equipment comes with a few extra boxes to tick 🩺Our latest guide breaks down what ...
29/10/2026

Sourcing cable assemblies for medical equipment comes with a few extra boxes to tick 🩺

Our latest guide breaks down what OEM teams should look for, from materials and traceability to testing, quality requirements and supplier capability.

If you’re reviewing medical device wiring support, this might be a useful place to start.

👉 Take a look here

Sourcing a medical device wiring harness UK supplier? Learn what to check for quality, materials, testing, compliance and reliable OEM cable assembly.

A multi-pin connector can be built correctly and still be wrong in one position. You won't see it. The machine will.This...
26/10/2026

A multi-pin connector can be built correctly and still be wrong in one position. You won't see it. The machine will.

This is what a continuity check looks like, start to finish.

Every pin, in sequence, against the drawing. It takes under a minute on a jig built for the job, and it's the difference between a fault found on our bench and a fault found on your line.

At Tec-Stop, every assembly is 100% electrically tested before it's packed. Not a sample from the batch. Every one.

Better we find it on our bench than you find it on your line.

A butt crimp is a perfectly good way to join two wires. It just isn't the only way, and on some jobs it isn't the best o...
23/10/2026

A butt crimp is a perfectly good way to join two wires. It just isn't the only way, and on some jobs it isn't the best one.

A crimped splice holds two conductors together by mechanical pressure inside a sleeve. That works, and it keeps working, right up until vibration, corrosion or heat cycling loosens the grip on it.

Ultrasonic welding takes a different route. High-frequency vibration fuses the strands into a single solid joint - no sleeve, no added material, and nothing that can work loose later. The join comes out smaller and lighter than the crimp it replaces.

We do both at Tec-Stop, and which one you get depends on where the assembly is going rather than what's quickest on the bench.

Bring us one that's failed and we'll tell you what we'd use instead.

An off-the-shelf loom that almost fits still has to be made to fit. That work doesn't disappear, it just moves to your b...
18/10/2026

An off-the-shelf loom that almost fits still has to be made to fit. That work doesn't disappear, it just moves to your bench.

A run that's 300mm short gets a join, and a join is a new failure point. A branch in the wrong place gets rerouted, and now it sits against something warm. Spare tails get taped back and tucked somewhere they were never designed to sit.

The real cost isn't the labour, it's that none of it is recorded. The loom on the machine no longer matches the drawing, and the next person to work on it has no way of knowing what changed or why.

At Tec-Stop, looms are built to your drawing, so the loom fits the machine first time and the drawing stays true for the life of it.

Made to fit works out cheaper than made to fit in.

Need electromechanical assembly or box build support… without adding more complexity to your project?We can help with wi...
15/10/2026

Need electromechanical assembly or box build support… without adding more complexity to your project?

We can help with wiring, control boxes, panels and wider electromechanical builds, with UK-based manufacturing from our Worcester facility and supply across the UK and internationally 🌍

Our latest guide explains what to look for in an electromechanical assembly supplier, what to include in your brief and how to get the clearest quote from the outset.

👉 Read our guide here

Looking for electromechanical assembly UK services? Explore box build, quality, sourcing, testing and what to look for in a UK manufacturing partner.

Let’s be honest, nobody chooses a wiring harness supplier expecting delays, rework or endless chasing.The right partner ...
01/10/2026

Let’s be honest, nobody chooses a wiring harness supplier expecting delays, rework or endless chasing.

The right partner should ask sensible questions, spot potential issues early and make life easier from prototype through to repeat production.

Our latest guide shares a practical checklist for OEM, engineering and procurement teams choosing a wiring harness manufacturer in the UK.

👇 Worth a read if you’re reviewing suppliers or planning a new programme.

📍 Wiring harnesses manufactured in Worcester, supplied across the UK, Europe and internationally.

Choosing a wiring harness manufacturer UK? Use this OEM supplier-selection checklist to select the right OEM wiring harness supplier UK.

There are two ways to get a machine wired, and the difference doesn't show up on the drawing. It shows up on the shop fl...
25/09/2026

There are two ways to get a machine wired, and the difference doesn't show up on the drawing. It shows up on the shop floor.

The first is cable, connectors and a wiring diagram, terminated at build. Every unit is a fresh opportunity to strip a wire short, mis-pin a connector or miss a label - and every one of those is found later, by someone else.

The second is a loom that arrives made, marked, tested and ready to drop in. Same electrical design, same components. The build time moves from your bench to ours, where it's set up to be repeatable.

At Tec-Stop, we build pre-terminated looms to your drawing, printed and labelled to your identification scheme, and 100% electrically tested before they ship.

Send us the drawing and we'll take that step off your line.

Address

Unit 87a Blackpole West Trading Estate
Worcester
WR38TJ

Opening Hours

Monday 8am - 4:30pm
Tuesday 8am - 4:30pm
Wednesday 8am - 4:30pm
Thursday 8am - 4:30pm
Friday 8am - 4:30pm

Telephone

+441905675110

Alerts

Be the first to know and let us send you an email when Tec-Stop posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Nearby computer & electronics services